Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB EPX-XT2S-E1-0253 is a 25 A three-pole moulded case circuit breaker with 50 kA breaking capacity and Ekip Dip LS/I electronic protection for commercial and industrial low-voltage electrical distribution systems.
£661.37
The ABB EPX-XT2S-E1-0253 is a high-performance 25 A three-pole moulded case circuit breaker (MCCB) designed to provide reliable overload and short-circuit protection in low-voltage electrical distribution systems. Featuring a 50 kA breaking capacity and electronic LS/I protection, this circuit breaker is suitable for commercial, industrial and building electrical installations requiring dependable circuit protection.
As part of the ABB Protecta Power distribution range, the EPX-XT2S-E1-0253 incorporates an ABB Tmax XT2S circuit breaker with an Ekip Dip LS/I electronic trip unit. This advanced protection system provides long-time overload protection and selectable short-time or instantaneous short-circuit protection, allowing engineers to configure protection characteristics to suit the electrical installation.
With a 25 A rated current, three-pole configuration and 50 kA short-circuit breaking capacity, the EPX-XT2S-E1-0253 is designed for integration into low-voltage switchboards, distribution panels and ABB Protecta Power assemblies. Its compact XT2 frame helps optimise installation space while providing reliable electrical protection for outgoing distribution circuits.
The ABB EPX-XT2S-E1-0253 provides protection against electrical overloads and short circuits using an electronic trip system. Its Ekip Dip LS/I protection unit monitors current conditions and initiates circuit breaker tripping when configured protection thresholds are exceeded. Long-time protection helps prevent damage caused by sustained overcurrent, while selectable short-time or instantaneous protection responds to short-circuit faults.
The ABB Tmax XT2S platform combines compact construction with high fault-interruption capability, making it suitable for modern low-voltage distribution boards and electrical switchgear. Within ABB Protecta Power systems, the breaker can be used to protect outgoing circuits while supporting coordinated electrical protection and maintenance requirements. Correct selection and configuration should consider prospective fault current, installation voltage and the protection requirements of the connected equipment.
| Product range | Protecta Power Devices |
|---|---|
| Circuit breaker family | Tmax XT |
| Frame series | XT2S |
| ABB order code | 1SDX255139R1 |
| Product type | Moulded Case Circuit Breaker (MCCB) |
| Rated current | 25 A |
| Number of poles | 3 |
| Breaking capacity | 50 kA |
| Trip unit | Ekip Dip LS/I |
| Trip technology | Electronic |
| Overload protection | Long-time (L) |
| Short-circuit protection | Selectable short-time (S) or instantaneous (I) |
| Frame designation | XT2S 160 |
| Installation application | Low-voltage power distribution |
| System configuration | Three-phase distribution circuits |
| Mounting application | Switchboard and distribution panel installation |
| Product group | Protecta Power Devices |
The ABB EPX-XT2S-E1-0253 is a three-pole moulded case circuit breaker designed to protect low-voltage electrical distribution circuits against overloads and short circuits in commercial and industrial installations.
The circuit breaker has a 25 A rated current, making it suitable for appropriately designed electrical distribution circuits requiring this nominal current rating.
The EPX-XT2S-E1-0253 has a specified 50 kA breaking capacity. The applicable breaking-capacity rating must be checked against the installation voltage and prospective short-circuit current.
LS/I protection combines long-time overload protection (L) with a selectable short-time (S) or instantaneous (I) short-circuit protection function. The ABB Ekip Dip LS/I electronic trip unit allows the relevant protection characteristics to be configured for the installation.
Yes. The EPX-XT2S-E1-0253 is a three-pole (3P) MCCB designed for three-phase electrical distribution applications.
This product uses the ABB Tmax XT2S moulded case circuit breaker platform and is supplied under the ABB Protecta Power device range.
Electronic LS/I protection uses an electronic trip unit to provide configurable overload and short-circuit protection characteristics. Conventional thermal-magnetic breakers use thermal and magnetic operating elements for overcurrent protection, with adjustment capabilities depending on the specific trip unit.
Yes. The EPX-XT2S-E1-0253 is listed within the ABB Protecta Power Devices range for distribution applications. The correct mounting arrangement, connections and accessories must be selected for the specific distribution board configuration.
ABB Tmax XT moulded case circuit breakers and Protecta Power distribution devices are designed to support dependable low-voltage electrical protection in commercial and industrial installations. The EPX-XT2S-E1-0253 combines a compact three-pole XT2S design, 25 A rated current, 50 kA breaking capacity and electronic LS/I protection for professional electrical distribution applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.