1SDX254847R1 ABB EPX-XT5N-E2-2503 250A 3P 36kA LSI Electronic Moulded Case Circuit Breaker

1SDX254847R1 ABB EPX-XT5N-E2-2503 250A 3P 36kA LSI Electronic Moulded Case Circuit Breaker

ABB EPX-XT5N-E2-2503 (1SDX254847R1) is a 250 A three-pole SACE Tmax XT5N400 moulded case circuit breaker with a specified 36 kA short-circuit breaking capacity and ABB Ekip Dip LSI electronic protection. Designed for compatible ABB Protecta Power distribution assemblies, it provides long-time overload protection, short-time delayed short-circuit protection and instantaneous short-circuit protection for three-phase outgoing circuits.

SKU: 1SDX254847R1Alt SKU: EPX-XT5N-E2-2503MPN: 1SDX254847R1
Price
List Price £1,786.22 ex VAT
Your Price (ex VAT)
£1,786.22
Manufacturer Lead Time Estimated Delivery 8 weeks
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £1,786.22
Trade pricing is personalised to your account

Manufacturer Lead Time

£1,786.22

Why Choose the ABB EPX-XT5N-E2-2503 250A 3-Pole LSI Electronic Moulded Case Circuit Breaker?

The ABB EPX-XT5N-E2-2503 is a high-performance 250 A three-pole moulded case circuit breaker (MCCB) designed to provide dependable overload and short-circuit protection in commercial and industrial low-voltage electrical distribution systems. Built around the established ABB SACE Tmax XT5N400 circuit breaker platform, this electronic MCCB combines robust construction with configurable protection technology for demanding electrical distribution applications.

As part of the ABB Protecta Power Devices product group, the EPX-XT5N-E2-2503 is intended for integration into compatible ABB Protecta Power distribution assemblies. Its ABB Ekip Dip LSI electronic trip configuration provides long-time overload protection, short-time delayed short-circuit protection and instantaneous short-circuit protection. These three functions enable electrical engineers to develop coordinated protection strategies for appropriately designed low-voltage power distribution networks.

Featuring a 250 A rated current, a specified 36 kA short-circuit breaking capacity and a three-pole (3P) configuration, the EPX-XT5N-E2-2503 is suitable for three-phase outgoing feeders, industrial distribution panels and commercial electrical installations. Its 140 mm nominal device width supports efficient integration into compatible distribution assemblies while providing the protection capabilities associated with the ABB XT5 platform.

Identified by ABB order code 1SDX254847R1, this circuit breaker offers electrical contractors, consulting engineers, panel builders and facilities managers a clearly specified 250A 3P 36kA LSI electronic MCCB for use in compatible ABB Protecta Power electrical distribution systems.

Key Advantages

  • 250 A rated current: Provides protection for appropriately designed higher-current three-phase distribution circuits.
  • 36 kA short-circuit breaking capacity: Offers substantial fault interruption capability in the specified ABB Protecta Power application.
  • Three-pole construction: Supports coordinated switching and protection of three phase conductors.
  • Electronic LSI protection: Incorporates long-time, short-time and instantaneous overcurrent protection functions.
  • ABB Ekip Dip technology: Provides configurable electronic trip characteristics for low-voltage electrical distribution.
  • Long-time overload protection: Helps safeguard conductors and connected equipment against sustained excessive current.
  • Short-time delayed protection: Supports coordination with downstream protective devices where the installation design permits.
  • Instantaneous protection: Enables rapid operation under sufficiently high short-circuit current conditions.
  • Protection setting flexibility: Allows engineers to configure protective characteristics within the capabilities of the fitted release.
  • ABB SACE Tmax XT5N400 platform: Uses an established circuit breaker design for commercial and industrial applications.
  • 400 A frame platform: Provides the XT5N400 mechanical frame with a 250 A rated electronic protection release.
  • 140 mm nominal width: Supports efficient space planning within compatible distribution assemblies.
  • Three-phase circuit protection: Suitable for electrical systems where a dedicated switched neutral pole is not required.
  • Protecta Power integration: Intended for use with compatible ABB mounting and connection arrangements.
  • Versatile applications: Suitable for commercial buildings, industrial facilities, plant distribution and electrical panel-building projects.

Key Features

  • Manufacturer: ABB.
  • Product group: Protecta Power Devices.
  • Product designation: EPX-XT5N-E2-2503.
  • ABB order code: 1SDX254847R1.
  • Circuit breaker range: ABB SACE Tmax XT.
  • Circuit breaker platform: XT5N400.
  • Rated current: 250 A.
  • Frame rating: 400 A.
  • Specified short-circuit breaking capacity: 36 kA.
  • Number of poles: Three.
  • Trip configuration: ABB Ekip Dip LSI electronic release.
  • Long-time protection (L): Protection against sustained overload conditions.
  • Short-time protection (S): Delayed short-circuit protection.
  • Instantaneous protection (I): Rapid short-circuit protection.
  • LSI protection arrangement: Long-time, short-time and instantaneous overcurrent protection functions.
  • Electronic trip settings: Configurable according to the fitted release characteristics.
  • Nominal device width: 140 mm.
  • Neutral switching: No dedicated switched neutral pole.
  • Installation: Compatible ABB Protecta Power distribution assemblies.
  • Application: Three-phase commercial and industrial low-voltage electrical distribution.

Advanced 250A Electronic LSI Protection for Commercial and Industrial Electrical Distribution

The ABB EPX-XT5N-E2-2503 250 A electronic MCCB is designed to help maintain the safety and reliability of low-voltage electrical distribution networks. Moulded case circuit breakers provide automatic interruption when defined abnormal current conditions occur, helping protect electrical cables, distribution equipment and connected loads against the potentially damaging effects of overloads and short circuits.

The electronic trip technology distinguishes this device from conventional thermal-magnetic MCCBs. The ABB Ekip Dip LSI release evaluates current conditions electronically and initiates tripping according to its configured protection characteristics. This provides additional flexibility for electrical engineers responsible for protective device selection, coordination and distribution system design.

The long-time protection function (L) responds to sustained overload conditions. Excessive current flowing through an electrical conductor over time can cause overheating and deterioration of insulation. Correctly configured long-time protection helps safeguard the protected circuit by initiating tripping when current and duration exceed the selected protective characteristics.

The short-time protection function (S) provides delayed operation under defined short-circuit conditions. This function can be valuable in distribution networks containing several protective devices connected in series. Where the overall protection design permits, a suitably configured short-time delay can help a downstream circuit breaker clear a fault before an upstream protective device operates.

The instantaneous protection function (I) provides rapid operation when current reaches the applicable instantaneous threshold. This helps limit the duration of severe short-circuit conditions and complements the overload and short-time protection functions.

Together, the L, S and I protection functions provide a comprehensive electronic overcurrent protection arrangement. The EPX-XT5N-E2-2503 is therefore suitable for appropriately engineered three-phase distribution circuits where adjustable protective characteristics and reliable fault interruption are required.

Understanding LSI Protection and Its Benefits

When specifying an electronic MCCB, the trip unit designation is an important part of the selection process. The LSI designation identifies a release incorporating long-time, short-time and instantaneous overcurrent protection functions.

Long-time protection addresses sustained overload conditions, short-time protection provides a delayed response to defined short-circuit conditions, and instantaneous protection provides rapid operation when current reaches a higher fault threshold. This combination allows engineers to develop protection settings suited to the characteristics of the circuit and the wider distribution network.

The distinction between LSI and LS/I is particularly important. An LSI release provides long-time, short-time and instantaneous protection functions together, whereas an LS/I release provides long-time protection with a choice between short-time and instantaneous short-circuit protection modes.

For installations where several circuit breakers operate in series, the availability of short-time and instantaneous functions can provide useful coordination flexibility. However, actual selectivity depends on the selected settings, prospective fault current and protective device combination. Coordination performance should always be confirmed using the relevant ABB technical data.

Three-Pole Switching for Higher-Current Electrical Distribution

The three-pole configuration of the ABB EPX-XT5N-E2-2503 enables coordinated switching and protection of three phase conductors. This makes the breaker suitable for appropriately designed three-phase distribution systems where a dedicated switched neutral pole is not required.

Three-pole MCCBs are widely used in commercial and industrial distribution networks, including outgoing feeders, sub-distribution circuits and electrical panels supplying three-phase equipment. Their suitability depends on the electrical system design, earthing arrangement, conductor configuration and applicable installation regulations.

Because the EPX-XT5N-E2-2503 is a 3P device, it does not provide a fourth pole for neutral switching. Where the installation requires coordinated disconnection of a neutral conductor, an appropriately specified four-pole circuit breaker should be considered instead.

The ABB XT5 three-pole platform has a nominal width of 140 mm, supporting practical integration into compatible electrical distribution assemblies. For XT5 outgoing devices, sufficient cable termination space should also be considered, particularly where larger conductors are required. Appropriate ABB cableway extension arrangements may be useful depending on the assembly design.

ABB SACE Tmax XT5N400 Platform: 250A Protection on a 400A Frame

The EPX-XT5N-E2-2503 is based on the ABB SACE Tmax XT5N400 platform. This means the device uses an XT5N400 circuit breaker frame while providing a specified 250 A rated current through its fitted electronic protection arrangement.

It is important to distinguish between the 400 A frame rating and the 250 A rated current of the selected breaker. The frame rating identifies the mechanical and electrical platform, while the rated current and trip release characteristics define the protection specified for the outgoing circuit.

The XT5 platform is suitable for distribution applications requiring a robust MCCB construction and electronic trip functionality. Its use within compatible ABB Protecta Power assemblies provides electrical designers with a clearly identified circuit breaker option for higher-current three-phase outgoing feeders.

When planning an installation, engineers should verify the selected device dimensions, cable connection requirements, mounting arrangements and compatibility with the relevant ABB distribution board configuration.

Selecting the Correct 250A MCCB for Your Installation

The 250 A rated current of the ABB EPX-XT5N-E2-2503 makes it suitable for circuits designed to operate within the current-carrying and protection capabilities of the device. Correct selection requires consideration of the circuit load, conductor sizing, installation conditions and electronic trip settings.

The specified 36 kA short-circuit breaking capacity is another essential selection parameter. The prospective short-circuit current at the point of installation must be assessed, and the applicable circuit breaker breaking capacity must be confirmed for the system operating voltage. The specified 36 kA rating should not be assumed to apply identically under every electrical condition.

Electrical designers should also assess the required level of selectivity between upstream and downstream protective devices. Although the LSI electronic release offers configurable protection characteristics, discrimination and back-up protection performance must be established using the relevant ABB coordination documentation.

For installations using ABB Protecta Power distribution equipment, the EPX-XT5N-E2-2503 provides a clearly identified three-pole electronic MCCB option. Appropriate mounting components, terminals, conductor connections, cableway space and assembly compatibility should be verified before installation and commissioning.

Typical Applications

  • ABB Protecta Power distribution boards requiring 250 A three-pole electronic MCCB protection.
  • Commercial building electrical distribution and higher-current outgoing feeder circuits.
  • Industrial electrical panels supplying appropriately rated three-phase equipment.
  • Three-phase sub-distribution systems requiring configurable electronic LSI protection.
  • Building services installations supplying mechanical and electrical plant.
  • Manufacturing facilities with substantial electrical distribution requirements.
  • Warehouses and logistics centres using three-phase electrical infrastructure.
  • Office complexes and retail premises with dedicated higher-current outgoing feeders.
  • Electrical distribution upgrades using compatible ABB Protecta Power equipment.
  • Switchboard manufacturing and panel-building projects requiring a 250 A, 3P, 36 kA electronic LSI MCCB.

Technical Specifications

Product group Protecta Power Devices
Product range SACE Tmax XT
Circuit breaker platform XT5N400
Model / SKU EPX-XT5N-E2-2503
ABB order code 1SDX254847R1
Product type Moulded case circuit breaker (MCCB)
Rated current 250 A
Frame rating 400 A
Short-circuit breaking capacity 36 kA (specified Protecta Power application)
Number of poles 3
Pole configuration Three-pole (3P)
Trip unit designation Ekip Dip LSI
Trip technology Electronic
Protection designation LSI
Long-time protection (L) Overload protection
Short-time protection (S) Delayed short-circuit protection
Instantaneous protection (I) Instantaneous short-circuit protection
Protection arrangement Long-time, short-time and instantaneous overcurrent protection
Electronic trip adjustment Refer to the fitted ABB Ekip Dip LSI release documentation
Neutral switching No dedicated switched neutral pole
Applicable circuit breaker standard IEC 60947-2
Nominal device width 140 mm
Installation type Fixed installation within a compatible distribution assembly
Mounting compatibility ABB Protecta Power, subject to appropriate mounting and connection arrangements
Electrical application Three-phase low-voltage power distribution
Typical use Outgoing feeder and sub-distribution circuit protection

Frequently Asked Questions

What is the ABB EPX-XT5N-E2-2503 used for?

The ABB EPX-XT5N-E2-2503 is a 250 A three-pole moulded case circuit breaker designed to protect low-voltage electrical distribution circuits against overloads and short circuits. It features an ABB Ekip Dip LSI electronic trip configuration and is intended for compatible ABB Protecta Power distribution assemblies.

What are the rated current and breaking capacity of the EPX-XT5N-E2-2503?

The EPX-XT5N-E2-2503 has a 250 A rated current and a specified 36 kA short-circuit breaking capacity within the ABB Protecta Power range. It is based on the ABB SACE Tmax XT5N400 platform, which has a 400 A frame rating. The applicable breaking capacity must be checked against the installation operating voltage and prospective fault current.

What does LSI mean on the ABB EPX-XT5N-E2-2503?

LSI stands for Long-time, Short-time and Instantaneous protection. Long-time protection responds to sustained overloads, short-time protection provides delayed short-circuit protection and instantaneous protection provides rapid operation under high fault-current conditions. These functions support configurable circuit protection for appropriately designed electrical distribution systems.

What is the difference between an LSI MCCB and an LS/I MCCB?

An LSI MCCB incorporates long-time, short-time and instantaneous overcurrent protection functions together. An LS/I MCCB provides long-time overload protection with a choice between short-time and instantaneous short-circuit protection modes. The LSI arrangement offers additional flexibility where both delayed and instantaneous short-circuit protection characteristics are required.

Where can the ABB EPX-XT5N-E2-2503 be installed?

The breaker is intended for installation within compatible ABB Protecta Power distribution boards, using the appropriate mounting and connection arrangements. The ABB XT5 three-pole platform has a nominal width of 140 mm. Installation and electronic trip configuration should be carried out by a competent electrical professional in accordance with the circuit design, ABB instructions and applicable electrical regulations.

Trusted by Electrical Professionals Worldwide

ABB SACE Tmax XT moulded case circuit breakers are established components in low-voltage electrical distribution, offering dependable protection for commercial and industrial installations. The ABB EPX-XT5N-E2-2503 combines a 250 A rated current, three-pole switching, specified 36 kA short-circuit breaking capacity and configurable ABB Ekip Dip LSI electronic protection in a robust device intended for compatible ABB Protecta Power distribution systems.