Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB EPX-XT1N-TM0404 is a 40 A four-pole SACE Tmax XT1N moulded case circuit breaker with 36 kA breaking capacity and TMA thermal-magnetic protection for commercial and industrial low-voltage electrical distribution systems.
£468.53
The ABB EPX-XT1N-TM0404 is a compact and reliable 40 A four-pole moulded case circuit breaker (MCCB) designed to protect low-voltage electrical distribution circuits against overloads and short circuits. Part of the ABB Protecta Power Devices range, this circuit breaker incorporates the ABB SACE Tmax XT1N platform with a TMA thermal-magnetic protection arrangement, providing dependable circuit protection for commercial and industrial electrical installations.
With a 36 kA short-circuit breaking capacity, the EPX-XT1N-TM0404 is designed to interrupt high fault currents while helping safeguard electrical conductors, distribution equipment and connected loads. Its thermal-magnetic protection combines overload protection with rapid short-circuit fault interruption, supporting safe and reliable operation in appropriately designed low-voltage systems.
Featuring a 40 A rated current, four-pole configuration and compact 110 mm nominal width, this MCCB is suitable for compatible three-phase distribution systems requiring four-pole switching. Its established ABB Tmax XT1N construction makes it a practical solution for electrical contractors, panel builders and maintenance engineers working with ABB Protecta Power distribution assemblies.
The ABB EPX-XT1N-TM0404 incorporates TMA thermal-magnetic protection to safeguard electrical installations against sustained overloads and short-circuit faults. The thermal protection element responds to excessive current over time, helping prevent overheating of electrical conductors and connected equipment. The magnetic protection element responds rapidly to high fault currents, enabling prompt circuit disconnection.
The four-pole construction supports applications where three phase conductors and a neutral conductor must be switched together. This arrangement is particularly useful in compatible three-phase distribution systems requiring neutral switching. The neutral pole's protection characteristics and suitability must be verified for the selected circuit breaker configuration and installation requirements.
The ABB SACE Tmax XT1N160 platform offers a compact moulded case design for commercial and industrial power distribution. Its nominal four-pole width of 110 mm helps optimise switchboard space while providing the switching and protective functions required for low-voltage electrical installations.
When installing the EPX-XT1N-TM0404 within an ABB Protecta Power distribution board, suitable mounting components, terminal connections and protective covers must be selected. Electrical designers should verify prospective fault current, conductor sizing, neutral arrangements and protective device coordination before commissioning.
| Product range | Protecta Power Devices |
|---|---|
| Circuit breaker series | SACE Tmax XT |
| Circuit breaker frame | XT1 |
| Performance level | XT1N |
| Frame configuration | XT1N160 |
| ABB order code | 1SDX253689R1 |
| Product type | Moulded case circuit breaker (MCCB) |
| Rated current | 40 A |
| Maximum frame rating | 160 A |
| Number of poles | 4P (four pole) |
| Short-circuit breaking capacity | 36 kA |
| Trip unit designation | TMA |
| Trip technology | Thermal-magnetic |
| Overload protection | Thermal |
| Short-circuit protection | Magnetic |
| Nominal width | 110 mm |
| Rated insulation voltage (Ui) | 800 V |
| Rated impulse withstand voltage (Uimp) | 8 kV |
| Applicable standard | IEC 60947-2 |
| Installation type | Electrical distribution board / switchboard mounting |
| Compatible system | ABB Protecta Power |
| Product category | Protecta Power Devices |
The ABB EPX-XT1N-TM0404 is a 40 A four-pole moulded case circuit breaker designed to protect commercial and industrial low-voltage electrical distribution circuits against overloads and short circuits.
The EPX-XT1N-TM0404 has a 40 A rated current and uses the ABB SACE Tmax XT1N160 platform, which has a maximum frame rating of 160 A.
The EPX-XT1N-TM0404 is specified with a 36 kA short-circuit breaking capacity. The applicable breaking capacity must be checked against the operating voltage and prospective fault current of the electrical installation.
TMA identifies a thermal-magnetic trip arrangement combining thermal overload protection with magnetic short-circuit protection. These functions help safeguard electrical conductors and connected equipment against excessive current and fault conditions.
A four-pole MCCB can switch three phase conductors and a neutral conductor together, making it suitable for compatible three-phase and neutral distribution systems where four-pole switching is required. The neutral protection arrangement must be checked for the specific installation.
Both circuit breakers use the ABB SACE Tmax XT1N four-pole platform and have a specified breaking capacity of 36 kA. The EPX-XT1N-TM0254 has a rated current of 25 A, while the EPX-XT1N-TM0404 is rated at 40 A.
The ABB EPX-XT1N-TM0404 uses the four-pole XT1 frame arrangement with a nominal width of 110 mm. Additional clearance may be required depending on the mounting arrangement and accessories.
Yes. The EPX-XT1N-TM0404 belongs to the ABB Protecta Power Devices range and is intended for compatible electrical distribution assemblies. Appropriate XT1 mounting components, terminal connections, covers and installation accessories must be selected according to the switchboard configuration.
ABB SACE Tmax XT moulded case circuit breakers provide dependable overload and short-circuit protection for commercial and industrial electrical installations. The EPX-XT1N-TM0404 combines a 40 A four-pole XT1N circuit breaker with 36 kA breaking capacity and TMA thermal-magnetic protection, delivering a compact solution for compatible ABB Protecta Power distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.