Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB EPX-XT4N-TM0633 is a 63 A three-pole SACE Tmax XT4N moulded case circuit breaker with 36 kA breaking capacity and TMA thermal-magnetic protection for commercial and industrial low-voltage electrical distribution systems.
£576.62
The ABB EPX-XT4N-TM0633 is a robust 63 A three-pole moulded case circuit breaker (MCCB) designed to provide reliable overload and short-circuit protection in commercial and industrial low-voltage electrical distribution systems. Part of the ABB Protecta Power Devices range, this circuit breaker incorporates the ABB SACE Tmax XT4N platform with a TMA thermal-magnetic trip unit, offering dependable protection for compatible electrical distribution assemblies.
Featuring a 36 kA short-circuit breaking capacity, the EPX-XT4N-TM0633 is designed to interrupt electrical faults while protecting cables, distribution equipment and connected loads. Its thermal-magnetic protection arrangement combines overload protection with magnetic short-circuit protection, making it suitable for three-phase outgoing feeders and industrial distribution circuits.
The 63 A rated current, three-pole configuration and established ABB Tmax XT4N construction make this MCCB a practical solution for electrical contractors, panel builders and maintenance engineers. Its compatibility with appropriately configured ABB Protecta Power switchboards supports organised and reliable low-voltage power distribution.
The ABB EPX-XT4N-TM0633 uses thermal-magnetic protection technology to safeguard electrical installations against two principal overcurrent conditions. The thermal element responds to sustained overload currents that may cause excessive conductor temperatures, while the magnetic element provides rapid operation during short-circuit faults.
The ABB SACE Tmax XT4N circuit breaker platform is designed for dependable low-voltage power distribution. Its three-pole construction allows the three phase conductors to be switched together, making it suitable for compatible industrial and commercial electrical systems where coordinated phase disconnection is required.
When installed within an ABB Protecta Power distribution board, the EPX-XT4N-TM0633 should be used with the correct mounting components, terminals and protective covers. Electrical designers should verify the prospective short-circuit current, conductor ratings, protective device coordination and applicable installation requirements before commissioning.
| Product range | Protecta Power Devices |
|---|---|
| Circuit breaker series | SACE Tmax XT |
| Circuit breaker frame | XT4 |
| Performance level | XT4N |
| Frame configuration | XT4N160 |
| ABB order code | 1SDX253481R1 |
| Product type | Moulded case circuit breaker (MCCB) |
| Rated current | 63 A |
| Maximum frame rating | 160 A |
| Number of poles | 3P (three pole) |
| Short-circuit breaking capacity | 36 kA |
| Trip unit designation | TMA |
| Trip technology | Thermal-magnetic |
| Overload protection | Thermal |
| Short-circuit protection | Magnetic |
| Rated insulation voltage (Ui) | 1000 V |
| Rated impulse withstand voltage (Uimp) | 8 kV |
| Applicable standard | IEC 60947-2 |
| Installation type | Electrical distribution board / switchboard mounting |
| Compatible system | ABB Protecta Power |
| Product category | Protecta Power Devices |
The ABB EPX-XT4N-TM0633 is a 63 A three-pole moulded case circuit breaker designed to protect commercial and industrial low-voltage distribution circuits against overloads and short circuits.
The EPX-XT4N-TM0633 has a 63 A rated current and uses the ABB SACE Tmax XT4N160 platform, which has a maximum frame rating of 160 A.
The EPX-XT4N-TM0633 is specified with a 36 kA short-circuit breaking capacity. The applicable breaking capacity must be checked against the operating voltage and prospective fault current of the installation.
TMA identifies a thermal-magnetic trip unit combining thermal overload protection with magnetic short-circuit protection. These protective functions help prevent damage to electrical conductors and connected equipment caused by excessive current.
Both platforms belong to the ABB SACE Tmax XT moulded case circuit breaker range. The XT4N is a different frame platform with its own mechanical arrangement and compatible accessories. Although both series offer thermal-magnetic protection, their mounting arrangements and accessories should not be assumed to be interchangeable.
Yes. Its three-pole configuration enables simultaneous switching and protection of three phase conductors, making it suitable for compatible three-phase low-voltage distribution circuits requiring a 63 A protective device.
Yes. The EPX-XT4N-TM0633 belongs to the ABB Protecta Power Devices range and is intended for compatible distribution assemblies. Appropriate XT4 mounting components, terminal connections, covers and installation accessories must be selected according to the switchboard configuration.
ABB SACE Tmax XT moulded case circuit breakers provide dependable overload and short-circuit protection for commercial and industrial electrical installations. The EPX-XT4N-TM0633 combines a 63 A three-pole XT4N circuit breaker with 36 kA breaking capacity and TMA thermal-magnetic protection, delivering a reliable solution for compatible ABB Protecta Power distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.