Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB EPX-XT4N-TM0323 (1SDX253478R1) is a Protecta Power Devices 32 A, 3-pole moulded case circuit breaker with a specified 36 kA breaking capacity and TMA thermal-magnetic protection for compatible low-voltage electrical distribution systems.
£576.62
The ABB EPX-XT4N-TM0323 is a 32 A, 3-pole moulded case circuit breaker (MCCB) with a specified 36 kA breaking capacity and TMA thermal-magnetic protection. Belonging to the ABB Protecta Power Devices product group, this circuit breaker is designed for low-voltage electrical distribution applications requiring protection against overloads and short circuits.
The EPX-XT4N-TM0323 combines a 32 A current rating with a three-pole configuration, making it suitable for appropriately designed three-phase electrical distribution circuits. Its thermal-magnetic protection technology combines a thermal element for overload protection with a magnetic element for short-circuit protection, helping safeguard electrical circuits and connected equipment.
Identified by ABB order code 1SDX253478R1, the EPX-XT4N-TM0323 is specified as a 32 A, 3-pole, 36 kA MCCB with TMA protection. It is intended for electrical contractors, panel builders, consulting engineers and maintenance professionals requiring a manufacturer-specific protective device for compatible ABB Protecta Power distribution installations.
Low-voltage electrical distribution systems require protective devices capable of responding to abnormal current conditions. The ABB EPX-XT4N-TM0323 provides a 32 A, three-pole MCCB configuration with thermal-magnetic protection for suitable industrial and commercial electrical installations.
The thermal protection element responds to sustained overload currents that may otherwise cause excessive heating of conductors and connected equipment. The magnetic protection element responds to high fault currents associated with short circuits. Together, these protection functions provide overcurrent protection within the operating characteristics of the circuit breaker.
The specified 36 kA breaking capacity is an important factor when selecting the MCCB for an electrical distribution system. The prospective short-circuit current at the installation point must be assessed, and the applicable breaking-capacity rating must be verified against the operating voltage and relevant ABB technical documentation. The stated 36 kA value should not be assumed to apply identically at every system voltage.
The three-pole arrangement is intended for the protection and interruption of three phase conductors in a suitable electrical circuit. The EPX-XT4N-TM0323 should be selected with consideration for conductor sizing, load characteristics, protective device coordination, installation conditions and the requirements of the complete distribution assembly.
As part of the ABB Protecta Power Devices range, the EPX-XT4N-TM0323 should be installed in accordance with ABB technical instructions. Applicable requirements of BS EN IEC 60947-2 should be considered when selecting the circuit breaker, while compliance with BS EN IEC 61439, where applicable, must be established for the complete verified low-voltage switchgear assembly rather than assumed from an individual component.
The ABB EPX-XT4N-TM0323 is a 32 A, 3-pole moulded case circuit breaker designed for low-voltage electrical distribution applications. It provides thermal-magnetic overload and short-circuit protection for appropriately designed three-phase circuits.
The EPX-XT4N-TM0323 has a specified 32 A rated current. The circuit breaker must be selected according to the circuit load, conductor characteristics, installation conditions and applicable ABB protection settings.
The 36 kA rating identifies the specified short-circuit breaking capacity of the MCCB. The applicable breaking capacity must be confirmed at the intended operating voltage and compared with the prospective fault current at the installation point using ABB technical documentation.
TMA identifies the breaker's thermal-magnetic protection arrangement. Thermal protection responds to sustained overload conditions, while magnetic protection responds to short-circuit currents. The exact adjustment capabilities and protection characteristics should be confirmed from the applicable ABB product documentation.
The official ABB order code is 1SDX253478R1. The manufacturer product designation is EPX-XT4N-TM0323, identifying a 32 A, 3-pole, 36 kA thermal-magnetic MCCB within the ABB Protecta Power Devices product group.
ABB Protecta Power Devices provide circuit protection solutions for professional low-voltage electrical distribution installations. The EPX-XT4N-TM0323 combines a 32 A current rating, three-pole construction, specified 36 kA breaking capacity and TMA thermal-magnetic protection, supporting appropriately engineered industrial and commercial electrical distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.