Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB EPX-XT2N-TM0253 is a 25 A three-pole SACE Tmax XT2N moulded case circuit breaker with 36 kA breaking capacity and TMA thermal-magnetic protection for commercial and industrial low-voltage electrical distribution systems.
£444.10
The ABB EPX-XT2N-TM0253 is a reliable 25 A three-pole moulded case circuit breaker (MCCB) designed to protect commercial and industrial low-voltage electrical distribution circuits against overloads and short circuits. Part of the ABB Protecta Power Devices range, this circuit breaker uses the ABB SACE Tmax XT2N platform with thermal-magnetic protection to deliver dependable performance in compatible electrical distribution assemblies.
Featuring a 36 kA short-circuit breaking capacity and a TMA thermal-magnetic trip arrangement, the EPX-XT2N-TM0253 combines overload protection with rapid short-circuit fault interruption. Its three-pole construction supports simultaneous switching of three-phase conductors, making it suitable for outgoing feeders, distribution panels and industrial electrical installations.
The XT2N circuit breaker frame offers a compact mechanical design with a nominal three-pole width of 100 mm. Designed for integration into compatible ABB Protecta Power switchboards, the EPX-XT2N-TM0253 provides a practical solution for electrical contractors, panel builders and facilities requiring reliable 25 A circuit protection.
The ABB EPX-XT2N-TM0253 incorporates thermal-magnetic circuit protection to address two important electrical fault conditions. Its thermal protection element responds to sustained overload currents that can cause conductor overheating, while the magnetic protection element responds rapidly to short-circuit faults requiring prompt circuit disconnection.
The ABB SACE Tmax XT2N platform combines a compact moulded case design with dependable switching and protective functions. The three-pole configuration is suitable for compatible three-phase electrical circuits where simultaneous switching of the phase conductors is required.
For installation in ABB Protecta Power distribution systems, suitable mounting components, terminal connections and protective covers must be selected for the specific switchboard arrangement. Electrical designers should also verify conductor sizing, prospective short-circuit current and protective device coordination before installation.
| Product range | Protecta Power Devices |
|---|---|
| Circuit breaker series | SACE Tmax XT |
| Circuit breaker frame | XT2 |
| Performance level | XT2N |
| ABB order code | 1SDX253465R1 |
| Product type | Moulded case circuit breaker (MCCB) |
| Rated current | 25 A |
| Maximum frame rating | 160 A |
| Number of poles | 3P (three pole) |
| Short-circuit breaking capacity | 36 kA |
| Trip unit designation | TMA |
| Trip technology | Thermal-magnetic |
| Overload protection | Thermal |
| Short-circuit protection | Magnetic |
| Rated insulation voltage (Ui) | 1000 V |
| Rated impulse withstand voltage (Uimp) | 8 kV |
| Nominal width | 100 mm |
| Applicable standard | IEC 60947-2 |
| Installation type | Electrical distribution board / switchboard mounting |
| Compatible system | ABB Protecta Power |
| Product category | Protecta Power Devices |
The ABB EPX-XT2N-TM0253 is a 25 A three-pole moulded case circuit breaker designed to protect low-voltage electrical distribution circuits against overloads and short circuits in commercial and industrial installations.
The EPX-XT2N-TM0253 has a 25 A rated current and uses the ABB SACE Tmax XT2N circuit breaker platform, which has a maximum frame rating of 160 A.
The EPX-XT2N-TM0253 is specified with a 36 kA short-circuit breaking capacity. The applicable breaking capacity must be assessed against the operating voltage and prospective fault current of the electrical installation.
TMA identifies the thermal-magnetic protection arrangement, combining thermal overload protection with magnetic short-circuit protection. These functions help protect conductors and connected electrical equipment against excessive current and fault conditions.
Both products use the ABB SACE Tmax XT2N three-pole platform and have a specified breaking capacity of 36 kA. The EPX-XT2N-TM0203 has a rated current of 20 A, while the EPX-XT2N-TM0253 is rated at 25 A.
Yes. Its three-pole construction enables simultaneous switching of three phase conductors, making it suitable for compatible three-phase low-voltage distribution circuits requiring a 25 A protective device.
Yes. The EPX-XT2N-TM0253 belongs to the ABB Protecta Power Devices range and is intended for compatible electrical distribution assemblies. Appropriate XT2 mounting components, connections, covers and installation accessories must be selected according to the switchboard configuration.
ABB SACE Tmax XT moulded case circuit breakers provide dependable overload and short-circuit protection for commercial and industrial electrical installations. The EPX-XT2N-TM0253 combines a 25 A three-pole XT2N circuit breaker with 36 kA breaking capacity and TMA thermal-magnetic protection, delivering a compact solution for compatible ABB Protecta Power distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.