Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB EPX-XT2N-TM0203 is a 20 A three-pole SACE Tmax XT2N moulded case circuit breaker with 36 kA breaking capacity at 400/415 V AC and TMA thermal-magnetic protection for commercial and industrial low-voltage distribution systems.
£444.10
The ABB EPX-XT2N-TM0203 is a compact and dependable 20 A three-pole moulded case circuit breaker (MCCB) designed for overload and short-circuit protection in commercial and industrial low-voltage electrical distribution systems. As part of the ABB Protecta Power Devices range, this product incorporates the ABB SACE Tmax XT2N circuit breaker platform with thermal-magnetic protection, providing reliable circuit protection for compatible electrical distribution assemblies.
The EPX-XT2N-TM0203 combines robust circuit breaker construction with proven thermal-magnetic protection technology to safeguard electrical conductors, connected equipment and distribution infrastructure. Its TMA thermal-magnetic protection arrangement provides protection against sustained overloads and short-circuit faults, helping minimise electrical damage and improve the operational reliability of distribution circuits.
With a 20 A rated current, three-pole configuration and 36 kA short-circuit breaking capacity at 400/415 V AC, the EPX-XT2N-TM0203 is suitable for three-phase outgoing feeders, commercial distribution boards and industrial electrical installations. Its compact 100 mm nominal width supports efficient integration into compatible ABB Protecta Power switchboard assemblies.
The ABB EPX-XT2N-TM0203 uses thermal-magnetic circuit protection technology to safeguard electrical installations against overloads and short circuits. The thermal protection element responds to sustained excessive current, helping prevent overheating of electrical conductors and connected equipment. The magnetic element responds rapidly to high short-circuit currents, disconnecting the affected circuit to limit potential damage.
The ABB SACE Tmax XT2N circuit breaker platform provides a compact and robust solution for low-voltage electrical distribution systems. Its three-pole construction enables simultaneous switching of three phase conductors, making it suitable for three-phase outgoing feeders, distribution circuits and other compatible electrical applications.
The EPX-XT2N-TM0203 is designed for integration into ABB Protecta Power distribution boards using suitable mounting and connection components. The XT2 platform offers flexibility for electrical panel construction, while correct conductor sizing, prospective fault-current assessment and protective device coordination remain essential for safe and dependable operation.
| Product range | Protecta Power Devices |
|---|---|
| Circuit breaker series | SACE Tmax XT |
| Circuit breaker frame | XT2 |
| Performance level | XT2N |
| ABB order code | 1SDX253464R1 |
| Product type | Moulded case circuit breaker (MCCB) |
| Rated current | 20 A |
| Frame rating | 160 A |
| Number of poles | 3P (three pole) |
| Rated ultimate short-circuit breaking capacity (Icu) | 36 kA at 400/415 V AC |
| Trip unit designation | TMA thermal-magnetic |
| Trip technology | Thermal-magnetic |
| Overload protection | Thermal |
| Short-circuit protection | Magnetic |
| Rated operational voltage | Up to 690 V AC |
| Rated insulation voltage (Ui) | 1000 V |
| Rated impulse withstand voltage (Uimp) | 8 kV |
| Nominal width | 100 mm |
| Applicable standard | IEC 60947-2 |
| Installation type | Electrical distribution board / switchboard mounting |
| Compatible system | ABB Protecta Power |
| Product category | Protecta Power Devices |
The ABB EPX-XT2N-TM0203 is a 20 A three-pole moulded case circuit breaker designed to protect low-voltage electrical distribution circuits against overloads and short circuits in commercial and industrial installations.
The EPX-XT2N-TM0203 has a 20 A rated current and uses the ABB SACE Tmax XT2N circuit breaker platform with a 160 A frame rating.
The EPX-XT2N-TM0203 is specified with a 36 kA short-circuit breaking capacity at 400/415 V AC. The breaking capacity varies with operating voltage, so the electrical system conditions must be considered when confirming fault-interruption requirements.
TMA identifies a thermal-magnetic protection arrangement combining thermal overload protection with magnetic short-circuit protection. This helps safeguard electrical cables and connected equipment against excessive current and short-circuit faults.
Both the XT1N and XT2N belong to the ABB SACE Tmax XT moulded case circuit breaker range. The XT2N uses a different mechanical frame and accessory arrangement, with a nominal three-pole width of 100 mm compared with 80 mm for the XT1N. Mounting and accessory compatibility must therefore be checked when selecting a circuit breaker.
Yes. The three-pole configuration enables simultaneous switching and protection of three phase conductors, making the circuit breaker suitable for compatible three-phase low-voltage distribution circuits requiring a 20 A protective device.
Yes. The EPX-XT2N-TM0203 belongs to the ABB Protecta Power Devices range and is intended for compatible distribution board assemblies. Appropriate XT2 mounting components, terminal connections, covers and installation accessories must be selected according to the switchboard configuration.
ABB SACE Tmax XT moulded case circuit breakers provide dependable overload and short-circuit protection for commercial and industrial electrical installations. The EPX-XT2N-TM0203 combines a 20 A three-pole XT2N circuit breaker with 36 kA breaking capacity and TMA thermal-magnetic protection, delivering a compact and reliable solution for compatible ABB Protecta Power distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.