Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB EPX-XT1N-TM0203 is a 20 A three-pole SACE Tmax XT1N moulded case circuit breaker with 36 kA breaking capacity at 400/415 V AC and TMA thermal-magnetic protection for commercial and industrial low-voltage distribution systems.
£348.06
The ABB EPX-XT1N-TM0203 is a compact and reliable 20 A three-pole moulded case circuit breaker (MCCB) designed to provide overload and short-circuit protection in commercial and industrial low-voltage electrical distribution systems. As part of the ABB Protecta Power Devices range, this product incorporates the ABB SACE Tmax XT1N circuit breaker platform with a thermal-magnetic protection arrangement for dependable operation in compatible electrical distribution assemblies.
The EPX-XT1N-TM0203 combines robust circuit breaker construction with thermal-magnetic protection technology to safeguard electrical cables, connected equipment and distribution infrastructure. Its TMA thermal-magnetic protection designation identifies an arrangement designed to respond to sustained overloads and short-circuit faults, helping minimise electrical damage and improve the reliability of distribution circuits.
With a 20 A rated current, three-pole configuration and 36 kA short-circuit breaking capacity, the EPX-XT1N-TM0203 is suitable for three-phase outgoing feeders, commercial distribution boards and industrial electrical installations. Its compact 80 mm nominal width supports efficient installation within compatible ABB Protecta Power switchboard assemblies.
The ABB EPX-XT1N-TM0203 uses thermal-magnetic circuit protection technology to safeguard electrical installations against overloads and short circuits. The thermal protection element responds to sustained excessive current, helping prevent overheating of electrical conductors and connected equipment. The magnetic element responds rapidly to high short-circuit currents, disconnecting the affected circuit to limit potential damage.
The ABB SACE Tmax XT1N circuit breaker platform provides compact protection for low-voltage electrical distribution systems. Its three-pole construction enables simultaneous switching of three phase conductors, making it suitable for three-phase outgoing feeders, distribution circuits and other compatible electrical applications.
The EPX-XT1N-TM0203 is designed for integration into ABB Protecta Power distribution boards using suitable mounting and connection components. Correct cable sizing, prospective fault-current assessment, protection coordination and selection of compatible installation accessories are essential for safe and dependable operation.
| Product range | Protecta Power Devices |
|---|---|
| Circuit breaker series | SACE Tmax XT |
| Circuit breaker frame | XT1 |
| Performance level | XT1N |
| ABB order code | 1SDX253304R1 |
| Product type | Moulded case circuit breaker (MCCB) |
| Rated current | 20 A |
| Maximum frame rating | 160 A |
| Number of poles | 3P (three pole) |
| Short-circuit breaking capacity | 36 kA at 400/415 V AC |
| Trip unit designation | TMA thermal-magnetic |
| Trip technology | Thermal-magnetic |
| Overload protection | Thermal |
| Short-circuit protection | Magnetic |
| Rated insulation voltage (Ui) | 800 V |
| Rated impulse withstand voltage (Uimp) | 8 kV |
| Nominal width | 80 mm |
| Applicable standard | IEC 60947-2 |
| Installation type | Electrical distribution board / switchboard mounting |
| Compatible system | ABB Protecta Power |
| Product category | Protecta Power Devices |
The ABB EPX-XT1N-TM0203 is a 20 A three-pole moulded case circuit breaker designed to protect low-voltage electrical distribution circuits against overloads and short circuits in commercial and industrial installations.
The EPX-XT1N-TM0203 has a 20 A rated current and uses the ABB SACE Tmax XT1N circuit breaker platform with a maximum frame rating of 160 A.
The EPX-XT1N-TM0203 is specified with a 36 kA short-circuit breaking capacity at 400/415 V AC. The applicable operating voltage and installation conditions must be considered when confirming the required fault-interruption capability.
TMA identifies a thermal-magnetic protection arrangement that combines thermal overload protection with magnetic short-circuit protection. This technology helps protect electrical conductors and connected equipment against excessive current and electrical faults.
The 20 A rated current identifies the current rating of this circuit breaker configuration, while the 160 A maximum frame rating identifies the capacity of the ABB Tmax XT1 platform. The frame rating does not mean that this 20 A device can continuously carry 160 A.
Yes. The three-pole configuration enables simultaneous switching and protection of three phase conductors, making the circuit breaker suitable for compatible three-phase low-voltage distribution circuits requiring a 20 A protective device.
Yes. The EPX-XT1N-TM0203 belongs to the ABB Protecta Power Devices range and is intended for compatible distribution board assemblies. Appropriate XT1 mounting components, terminal connections, covers and installation accessories must be selected according to the switchboard configuration.
ABB SACE Tmax XT moulded case circuit breakers provide dependable overload and short-circuit protection for commercial and industrial electrical installations. The EPX-XT1N-TM0203 combines a 20 A three-pole XT1N circuit breaker with 36 kA breaking capacity and TMA thermal-magnetic protection, delivering a compact solution for compatible ABB Protecta Power distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.