Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB EPX-XT1S-TM0633 Protecta Power 63 A three-pole 50 kA moulded case circuit breaker with thermal-magnetic protection, based on the ABB SACE Tmax XT1S platform, order code 1SDX248657R1, for compatible low-voltage electrical distribution installations.
£394.63
The ABB EPX-XT1S-TM0633 is a 63 A three-pole moulded case circuit breaker (MCCB) designed for circuit protection within compatible ABB Protecta Power low-voltage electrical distribution assemblies. Based on the ABB SACE Tmax XT1S circuit breaker platform, this device combines a 50 kA specified breaking capacity with thermal-magnetic protection to help safeguard appropriately designed three-phase circuits against overloads and short circuits.
Part of the ABB Protecta Power Devices product group, the EPX-XT1S-TM0633 is identified by ABB order code 1SDX248657R1. Its manufacturer product description is EPX-XT1S-TM0633 63A 3P 50kA MCCB - TMA. The product is intended for installations requiring a manufacturer-specified 63 A outgoing protective device with three-pole switching and a high short-circuit breaking capacity.
The ABB SACE Tmax XT1S platform forms part of the wider Tmax XT family of low-voltage circuit breakers. The 63 A rated current identifies the nominal current of this particular device, while its three-pole configuration allows coordinated switching and protection of three phase conductors. Its specified 50 kA breaking capacity makes it relevant to distribution systems where the prospective fault current requires an appropriately rated circuit breaker.
ABB's Protecta Power selection information identifies the XT1S three-pole outgoing MCCB range with a nominal device width of 80 mm. This compact arrangement supports efficient use of compatible distribution panelboard space while retaining the circuit protection characteristics associated with the XT1S platform.
The ABB EPX-XT1S-TM0633 provides circuit protection using a thermal-magnetic trip arrangement. Thermal-magnetic MCCBs employ complementary operating principles to respond to sustained overloads and short-circuit faults. When correctly specified and installed, these functions help protect electrical conductors and connected equipment against the effects of excessive current.
The thermal protection element responds to overload conditions in which current exceeds the applicable operating threshold for a sufficient period. Its time-dependent operating characteristic allows the circuit breaker to respond to sustained overloads while accommodating normal short-duration current variations within the device's specified operating limits.
The magnetic protection element responds to substantially higher fault currents associated with short circuits. Rapid fault interruption is particularly important because high short-circuit currents can produce significant thermal and mechanical stresses within distribution equipment, conductors and electrical connections.
The EPX-XT1S-TM0633 is specified as a 50 kA MCCB. This breaking-capacity figure must be assessed against the operating voltage and the prospective short-circuit current at the installation point. The relevant ultimate short-circuit breaking capacity (Icu) and service short-circuit breaking capacity (Ics) should be confirmed from the applicable ABB technical documentation.
The manufacturer's TMA designation identifies the specified thermal-magnetic protection arrangement. The exact trip characteristics and any available adjustment facilities must be verified against the supplied device documentation before commissioning. The required protection settings and coordination should be determined from the electrical design rather than inferred solely from the nominal 63 A current rating.
The three-pole configuration allows the EPX-XT1S-TM0633 to provide coordinated switching and protection of three phase conductors within a suitable three-phase electrical system. This makes the device relevant to distribution circuits supplying three-phase equipment, downstream distribution assemblies and other appropriately designed electrical loads.
The 63 A rated current and 50 kA breaking capacity describe different aspects of the circuit breaker's performance. Rated current relates to its nominal current-carrying and overload protection characteristics, while breaking capacity relates to its ability to interrupt short-circuit current under specified conditions.
A 63 A outgoing circuit may therefore require a 50 kA circuit breaker when supplied from an electrical distribution system with a sufficiently high prospective fault level. Conversely, the presence of a 50 kA breaking-capacity rating does not permit the device to protect a circuit whose normal operating current exceeds its appropriately applied current rating.
The EPX-XT1S-TM0633 is a three-pole device and should not be treated as a four-pole circuit breaker. Where the electrical design requires four-pole switching, ABB lists the separately specified EPX-XT1S-TM0634. The correct pole configuration must be selected according to the distribution system and applicable installation requirements.
The ABB SACE Tmax XT1S platform forms part of the wider Tmax XT moulded case circuit breaker range. The XT1 frame family provides a compact protective-device format for low-voltage distribution applications requiring suitable current ratings and short-circuit protection.
ABB's Protecta Power selection information identifies the XT1S three-pole outgoing range with a nominal width of 80 mm. This dimension relates to the device range identified in the selection guide and can assist with planning compatible outgoing MCCB arrangements.
The nominal device width must not be interpreted as the complete installed dimensions of the circuit breaker, mounting components, cable terminals and protective covers. Final layout requirements must be checked against the relevant ABB panelboard drawings and installation instructions.
The XT1S frame family includes devices with nominal currents up to 160 A, but the EPX-XT1S-TM0633 itself is rated at 63 A. The frame family does not alter the current rating of this particular protective device. Cable sizing and circuit protection must therefore be based on the specified 63 A device and its actual operating characteristics.
The ABB Protecta Power system provides a coordinated range of low-voltage electrical distribution assemblies, protective devices and installation accessories. The EPX-XT1S-TM0633 is intended for use in compatible outgoing MCCB positions, subject to the specific panelboard configuration and approved connection arrangements.
Correct installation requires confirmation of the mechanical mounting arrangement, electrical connections, protective covering and available cable termination space. The circuit breaker must be installed using components suitable for the relevant Protecta Power assembly and in accordance with ABB's applicable installation instructions.
The required cable size must be determined from the electrical design. Important considerations include conductor material, current-carrying capacity, installation method, ambient temperature, grouping factors, voltage drop, short-circuit withstand requirements and the compatibility of the selected terminals.
The appropriate MCCB mounting, connection and cover accessories must be selected for the intended installation. The exact scope of supply associated with ABB order code 1SDX248657R1 should be confirmed before ordering. A complete panelboard, mounting kit or unrelated connection accessories should not be assumed to be included unless expressly specified.
Installation, inspection and commissioning should be carried out by suitably competent personnel in accordance with the manufacturer's instructions and applicable electrical installation standards. The final protection settings and coordination requirements should be established from the approved electrical design.
ABB offers the EPX-XT1S-TM0633 alongside the related EPX-XT1N-TM0633. Both products are 63 A three-pole thermal-magnetic XT1 MCCBs, but they have different specified short-circuit breaking capacities.
The EPX-XT1S-TM0633 is specified at 50 kA, while the EPX-XT1N-TM0633 is specified at 36 kA. The correct performance class must be selected according to the prospective short-circuit current, operating voltage and the applicable circuit protection requirements.
A higher breaking capacity does not increase the device's nominal current rating. Both products remain 63 A circuit breakers, and the suitability of either variant depends on the electrical system design, conductor protection and protective-device coordination.
ABB also provides related XT1S options, including the EPX-XT1S-TM0323 rated at 32 A and the EPX-XT1S-TM1603 rated at 160 A. Where a four-pole arrangement is required, the EPX-XT1S-TM0634 provides a separately specified 63 A option. These variants should not be substituted without checking their electrical and mechanical suitability.
| Product group | Protecta Power Devices |
|---|---|
| Series | Protecta Power |
| ABB order code | 1SDX248657R1 |
| Manufacturer product description | EPX-XT1S-TM0633 63A 3P 50kA MCCB - TMA |
| Product type | Moulded case circuit breaker |
| Product category | Low-voltage circuit protection devices |
| Circuit breaker family | ABB SACE Tmax XT |
| Device platform | XT1S |
| Frame family | XT1 |
| Nominal frame family size | 160 A |
| Breaking-capacity class | S |
| Rated current | 63 A |
| Number of poles | 3 |
| Pole configuration | 3P |
| Specified breaking capacity | 50 kA |
| Protection technology | Thermal-magnetic |
| Manufacturer trip designation | TMA |
| Protection functions | Overload and short-circuit protection |
| Nominal width listed for XT1S three-pole outgoing devices | 80 mm |
| Primary application | Three-phase low-voltage circuit protection |
| Associated distribution system | ABB Protecta Power |
| Typical installation position | Compatible outgoing MCCB arrangement |
| Operating voltage | Confirm from the applicable ABB technical documentation |
| Applicable Icu and Ics ratings | Verify at the intended operating voltage |
| Thermal and magnetic trip characteristics | Confirm for the supplied device |
| Terminal configuration | Confirm against the supplied MCCB and connection accessories |
| Maximum conductor capacity | Dependent on the selected terminal arrangement |
| Mounting and protective-cover accessories | Select according to the Protecta Power assembly |
| Related 63 A 36 kA variant | EPX-XT1N-TM0633 |
| Related 32 A 50 kA variant | EPX-XT1S-TM0323 |
| Related 63 A four-pole variant | EPX-XT1S-TM0634 |
| Related 160 A 50 kA variant | EPX-XT1S-TM1603 |
The ABB EPX-XT1S-TM0633 is a 63 A three-pole moulded case circuit breaker designed for compatible ABB Protecta Power low-voltage distribution installations. It provides thermal-magnetic overload and short-circuit protection for appropriately designed three-phase electrical circuits.
The EPX-XT1S-TM0633 has a manufacturer-specified 50 kA breaking capacity. The applicable interruption rating must be verified at the intended operating voltage using ABB's technical documentation, together with the prospective short-circuit current at the installation point.
TMA identifies the manufacturer's thermal-magnetic trip arrangement. The thermal element provides overload protection, while the magnetic element provides short-circuit protection. The exact trip characteristics and any available adjustment facilities must be confirmed from the documentation for the supplied device.
Both products are 63 A three-pole thermal-magnetic XT1 MCCBs. The EPX-XT1S-TM0633 has a specified breaking capacity of 50 kA, while the EPX-XT1N-TM0633 is specified at 36 kA. The correct version depends on the prospective fault current, operating voltage and electrical protection design.
The ABB order code is 1SDX248657R1, and the model reference is EPX-XT1S-TM0633. The manufacturer product description is EPX-XT1S-TM0633 63A 3P 50kA MCCB - TMA, within the ABB Protecta Power Devices product group.
ABB Protecta Power provides electrical contractors, panel builders and distribution system designers with a coordinated range of low-voltage protective devices, panelboards and installation accessories. The EPX-XT1S-TM0633 combines a 63 A three-pole ABB SACE Tmax XT1S circuit breaker with 50 kA specified breaking capacity and thermal-magnetic protection, supporting outgoing circuit protection within compatible Protecta Power electrical distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.