Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB EPX-XT1S-TM0323 Protecta Power 32 A three-pole 50 kA moulded case circuit breaker with thermal-magnetic TMA protection, based on the ABB SACE Tmax XT1S platform, order code 1SDX248656R1, for compatible low-voltage electrical distribution installations.
£394.63
The ABB EPX-XT1S-TM0323 is a 32 A three-pole moulded case circuit breaker (MCCB) designed for outgoing circuit protection in compatible ABB Protecta Power low-voltage electrical distribution assemblies. Based on the ABB SACE Tmax XT1S circuit breaker platform, the device combines a 50 kA specified breaking capacity with thermal-magnetic TMA protection for appropriately designed three-phase electrical circuits.
Part of the ABB Protecta Power Devices product group, the EPX-XT1S-TM0323 is identified by ABB order code 1SDX248656R1. Its manufacturer product description is EPX-XT1S-TM0323 32A 3P 50kA MCCB - TMA. This combination of a 32 A current rating, three-pole configuration and 50 kA breaking capacity makes it a suitable candidate for distribution applications where a relatively low-rated outgoing circuit requires substantial short-circuit interruption capability.
The XT1S platform belongs to ABB's SACE Tmax XT family of moulded case circuit breakers. The 32 A rating identifies the nominal current of this protective device, while its three-pole configuration provides coordinated switching and protection of three phase conductors. ABB's Protecta Power selection information identifies the XT1S three-pole outgoing range as occupying a nominal 80 mm device width, supporting compact arrangements in compatible distribution panelboards.
The ABB EPX-XT1S-TM0323 provides three-pole circuit protection through a thermal-magnetic TMA trip arrangement. Thermal-magnetic circuit breakers use complementary operating principles to respond to overload and short-circuit conditions, helping protect electrical conductors and connected equipment when correctly selected and installed.
The thermal protection element responds to sustained overcurrent conditions. Where a circuit carries current above the applicable protection threshold for a sufficient period, the thermal mechanism provides an overload response. This time-dependent behaviour is intended to distinguish sustained overloads from normal short-duration variations in current.
The magnetic protection element responds to the substantially higher currents associated with short-circuit faults. Rapid interruption of high fault currents is important because short circuits can produce significant thermal and mechanical stresses within electrical distribution equipment.
The EPX-XT1S-TM0323 is specified as a 50 kA MCCB. Its breaking capacity must be considered alongside the system operating voltage, prospective short-circuit current and the applicable ABB interruption ratings. The relevant ultimate short-circuit breaking capacity (Icu) and service short-circuit breaking capacity (Ics) should be checked in the manufacturer's technical documentation before the device is specified.
The TMA designation identifies the manufacturer's thermal-magnetic trip arrangement. The precise thermal and magnetic adjustment ranges, available settings and operating curves must be established from the documentation for the supplied device. They should not be inferred solely from the XT1 frame designation or the 32 A nominal current.
The three-pole configuration enables the EPX-XT1S-TM0323 to provide coordinated switching and protection of three phase conductors within a suitable three-phase electrical system. This makes the device relevant to circuits supplying three-phase equipment, downstream electrical distribution arrangements and other appropriately designed loads.
Although the device has a 32 A current rating, its specified 50 kA breaking capacity addresses a different aspect of circuit protection. Rated current relates to the circuit breaker's nominal current-carrying and protection characteristics, while breaking capacity relates to its ability to interrupt a short-circuit fault under defined conditions.
A 32 A device with a 50 kA breaking capacity may therefore be appropriate where a relatively modest load current is supplied from a distribution system with a high prospective fault level. The actual suitability must be established through the electrical design, including conductor protection, operating voltage, prospective fault current and protective-device coordination.
The EPX-XT1S-TM0323 is a three-pole MCCB, not a four-pole device. Where the electrical design requires a four-pole configuration, ABB lists the separate EPX-XT1S-TM0324 32 A four-pole 50 kA thermal-magnetic MCCB. The correct pole arrangement must be selected according to the electrical system and applicable installation requirements.
The ABB SACE Tmax XT1S platform is part of ABB's wider Tmax XT range of moulded case circuit breakers. The XT1 family provides a compact circuit breaker format for appropriately rated low-voltage distribution applications.
ABB's Protecta Power selection information identifies the XT1S three-pole outgoing device range with a nominal width of 80 mm. This value is useful when comparing the space allocated to different outgoing MCCB families within the Protecta Power system.
The nominal width should not be treated as the complete installed dimensions of the circuit breaker, mounting components, terminals and protective covers. The final assembly layout must be checked against the applicable ABB panelboard drawings and installation instructions.
Within the same 50 kA performance class, ABB lists related XT1S devices including the EPX-XT1S-TM0633 rated at 63 A and the EPX-XT1S-TM1603 rated at 160 A. These are separate products with different current ratings and must be selected according to the requirements of the protected circuit.
The ABB Protecta Power system provides coordinated low-voltage distribution assemblies, protective devices and installation accessories. The EPX-XT1S-TM0323 is intended for use in compatible outgoing MCCB positions, subject to the specific panelboard configuration.
Correct installation requires confirmation of the MCCB mounting arrangement, electrical connections, protective covering and available cable termination space. The device should be installed only in a configuration supported by the relevant ABB technical and assembly documentation.
The cable size must be determined from the circuit design rather than the MCCB frame designation alone. Relevant factors include conductor material, current-carrying capacity, installation method, ambient temperature, grouping, voltage drop, fault protection and terminal compatibility.
The appropriate mounting, connection and cover accessories must be selected for the intended Protecta Power assembly. The exact components supplied under ABB order code 1SDX248656R1 should be confirmed before ordering. A complete panelboard or additional installation accessories should not be assumed to be included unless expressly specified.
Installation, inspection and commissioning should be carried out by suitably competent personnel in accordance with ABB's instructions and applicable electrical installation standards. The final protective-device settings and coordination requirements should be established from the approved electrical design.
ABB offers the EPX-XT1S-TM0323 alongside the related EPX-XT1N-TM0323. Both are 32 A three-pole thermal-magnetic MCCBs within the XT1 family, but they have different specified breaking capacities.
The EPX-XT1S-TM0323 is specified at 50 kA, while the EPX-XT1N-TM0323 is specified at 36 kA. The correct performance class must be selected according to the prospective short-circuit current, applicable operating voltage and electrical protection requirements.
A higher specified breaking capacity does not change the nominal current rating of the device. Both variants remain 32 A circuit breakers, and the conductor protection and load assessment must be based on the actual device characteristics.
For installations requiring different current ratings or pole configurations, ABB provides additional XT1S variants. Selection should always be based on the electrical design and verified compatibility with the intended Protecta Power assembly.
| Product group | Protecta Power Devices |
|---|---|
| Series | Protecta Power |
| ABB order code | 1SDX248656R1 |
| Manufacturer product description | EPX-XT1S-TM0323 32A 3P 50kA MCCB - TMA |
| Product type | Moulded case circuit breaker |
| Product category | Low-voltage circuit protection devices |
| Circuit breaker family | ABB SACE Tmax XT |
| Device platform | XT1S |
| Frame family | XT1 |
| Breaking-capacity class | S |
| Rated current | 32 A |
| Number of poles | 3 |
| Pole configuration | 3P |
| Specified breaking capacity | 50 kA |
| Protection technology | Thermal-magnetic |
| Trip-unit designation | TMA |
| Protection functions | Overload and short-circuit protection |
| Nominal width listed for XT1S three-pole outgoing devices | 80 mm |
| Primary application | Three-phase low-voltage circuit protection |
| Associated distribution system | ABB Protecta Power |
| Typical installation position | Compatible outgoing MCCB arrangement |
| Operating voltage | Confirm from the applicable ABB technical documentation |
| Applicable Icu and Ics ratings | Verify at the intended operating voltage |
| Thermal and magnetic adjustment ranges | Confirm for the supplied TMA trip unit |
| Terminal configuration | Confirm against the supplied device and connection accessories |
| Maximum conductor capacity | Dependent on the selected terminal arrangement |
| Mounting accessories | Select according to the Protecta Power assembly |
| Related 32 A 36 kA variant | EPX-XT1N-TM0323 |
| Related 63 A 50 kA variant | EPX-XT1S-TM0633 |
| Related 32 A four-pole variant | EPX-XT1S-TM0324 |
The ABB EPX-XT1S-TM0323 is a 32 A three-pole moulded case circuit breaker designed for compatible ABB Protecta Power low-voltage distribution installations. It provides thermal-magnetic overload and short-circuit protection for appropriately designed three-phase electrical circuits.
The EPX-XT1S-TM0323 has a manufacturer-specified 50 kA breaking capacity. The applicable interruption rating must be verified at the intended operating voltage using ABB's technical documentation, together with the prospective short-circuit current at the installation point.
TMA identifies the circuit breaker's thermal-magnetic trip arrangement. The thermal element provides overload protection, while the magnetic element provides short-circuit protection. The exact adjustment ranges and operating characteristics must be confirmed from the documentation for the supplied device.
Both products are 32 A three-pole thermal-magnetic XT1 MCCBs. The EPX-XT1S-TM0323 has a specified breaking capacity of 50 kA, while the EPX-XT1N-TM0323 is specified at 36 kA. The correct version depends on the prospective fault current, operating voltage and electrical protection design.
The ABB order code is 1SDX248656R1, and the model reference is EPX-XT1S-TM0323. The manufacturer product description is EPX-XT1S-TM0323 32A 3P 50kA MCCB - TMA, within the ABB Protecta Power Devices product group.
ABB Protecta Power provides electrical contractors, panel builders and distribution system designers with a coordinated range of low-voltage protective devices, panelboards and installation accessories. The EPX-XT1S-TM0323 combines a 32 A three-pole ABB SACE Tmax XT1S circuit breaker with 50 kA specified breaking capacity and thermal-magnetic TMA protection, supporting dependable outgoing circuit protection within compatible Protecta Power electrical distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.