Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB E4.3V/MS 4000 3p FHR SACE Emax 3 three-pole fixed switch-disconnector rated at 4000 A with rear horizontal terminals and 150 kA short-circuit capability at 415 V.
£13,898.98
The ABB E4.3V/MS 4000 3p FHR (1SDA125917R1) is a high-current SACE Emax 3 switch-disconnector designed for dependable isolation and switching in demanding low-voltage electrical distribution systems. Rated at 4000 A, this three-pole fixed device combines ABB's E4.3 frame with the V/MS high-performance switch-disconnector configuration.
Unlike an Emax 3 circuit breaker fitted with an Ekip protection trip unit, the E4.3V/MS is an MS switch-disconnector intended primarily for circuit isolation and switching. Its fixed construction makes it suitable for permanent installation in main distribution switchboards where high current-carrying capacity and robust mechanical isolation are required.
The E4.3V/MS 4000 has a rated current of 4000 A and a short-circuit capability of 150 kA at 415 V. Its three-pole fixed configuration and rear horizontal terminal arrangement provide a practical solution for high-current industrial, commercial and infrastructure power distribution assemblies.
ABB SACE Emax 3 provides solutions for modern low-voltage power infrastructure where operational continuity, high electrical performance and flexible system integration are important. The E4.3 frame supports high-current installations while retaining a practical footprint for integration into industrial distribution assemblies.
The E4.3V/MS 4000 is configured as a switch-disconnector rather than an overcurrent-protection circuit breaker. This makes it particularly suitable where a dedicated high-current switching and isolation device is required, with system fault protection provided by other appropriately coordinated protective equipment.
| Series | SACE Emax 3 |
|---|---|
| Order code | 1SDA125917R1 |
| Product type | Switch-disconnector |
| Frame | E4.3 |
| Version | V/MS |
| Rated current | 4000 A |
| Number of poles | 3P |
| Execution | Fixed |
| Terminal configuration | FHR / rear horizontal |
| Short-circuit capability at 415 V | 150 kA |
| Height | 371 mm |
| Width | 384 mm |
| Depth | 270 mm |
This SACE Emax 3 switch-disconnector is designed for high-current switching and electrical isolation in low-voltage industrial, commercial and infrastructure distribution systems.
The ABB E4.3V/MS 4000 3p FHR has a rated current of 4000 A.
ABB identifies 1SDA125917R1 as a switch-disconnector. It is intended for switching and isolation rather than providing the Ekip electronic overcurrent protection associated with Emax 3 circuit-breaker versions.
This model has a three-pole fixed configuration with rear horizontal terminals for permanent installation within compatible low-voltage switchgear.
ABB specifies a short-circuit capability of 150 kA at 415 V for this E4.3V/MS 4000 switch-disconnector.
ABB SACE Emax 3 switch-disconnectors provide robust high-current switching and isolation for demanding low-voltage electrical distribution systems, combining substantial electrical performance with practical switchboard integration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.