Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB EPX-A1C-080L2 is an 80 A single-pole Formula A1N125 thermal-magnetic MCCB configuration with a 25 kA Protecta Power breaking-capacity classification and L2-specific LSC connection arrangement for compatible low-voltage distribution panelboards.
£204.11
The ABB EPX-A1C-080L2 is an 80 A single-pole moulded case circuit breaker (MCCB) configuration designed for compatible ABB Protecta Power low-voltage distribution panelboards. Based on the ABB Formula A1N125 circuit breaker platform, this outgoing protective device incorporates a designated LSC L2 connection arrangement and thermal-magnetic protection.
Part of the ABB Protecta Power Devices range, the EPX-A1C-080L2 provides overload and short-circuit protection for individual outgoing circuits. Its 80 A rated current, compact single-pole construction and 125 A frame family make it suitable for appropriately designed commercial and industrial distribution installations.
ABB lists the A1N125 80 A single-pole outgoing breaker within its 25 kA Protecta Power device range. The underlying Formula A1N125 breaker uses fixed thermal-magnetic protection, providing a thermal response to sustained overload conditions and a magnetic response to short-circuit faults. The Protecta Power assembly designation includes TMA, so the exact protective characteristics should be confirmed from the supplied breaker documentation.
Identified by ABB order code 1SDA123205R1, this L2-specific configuration supports accurate selection of outgoing protective devices for ABB Protecta Power panelboard assemblies.
The ABB EPX-A1C-080L2 is designed to provide dependable overcurrent protection within compatible Protecta Power distribution systems. By combining the Formula A1N125 circuit breaker platform with a designated outgoing connection arrangement, it supports professional panelboard construction and straightforward device identification.
The thermal protection element responds to sustained overload currents that can cause excessive heating of cables and connected equipment. Its operation is based on the protective characteristics of the supplied breaker, helping protect the circuit when the device is correctly selected for the conductor and operating conditions.
The magnetic protection element responds to short-circuit currents, providing rapid interruption when fault conditions reach the device's operating threshold. Together, these functions offer a conventional thermal-magnetic protection solution without requiring an electronic trip unit.
ABB identifies the underlying 80 A A1N125 single-pole breaker as a fixed thermal-magnetic device. Although the Protecta Power product description uses the term TMA, installers should verify the actual trip characteristics from the manufacturer's documentation rather than assuming adjustable settings are available.
The L2 designation distinguishes this configuration from the corresponding L1 and L3 versions. Correct phase-position selection is important for matching the outgoing protective device to the panelboard's internal connection arrangement. The LSC designation forms part of this specified assembly configuration.
ABB's Protecta Power documentation identifies a maximum cable capacity of 50 mm² for A1 single-pole outgoing devices. The actual conductor size permitted depends on the fitted terminals, conductor type, installation conditions and relevant electrical design requirements.
Installation of outgoing MCCBs within Protecta Power assemblies also requires the appropriate MCCB base plate and cover. These components must be selected for the relevant panelboard and device configuration, and their inclusion should not be assumed unless confirmed in the supplied assembly.
Before installation, the protective device must be checked against the prospective short-circuit current, system voltage, conductor current-carrying capacity and upstream protection. The manufacturer's published breaking-capacity values must be applied at the relevant operating voltage.
For new installations, refurbishment and replacement projects, the EPX-A1C-080L2 offers a clearly identified 80 A L2 outgoing MCCB solution within the ABB Protecta Power system.
| Product group | Protecta Power Devices |
|---|---|
| Product model | EPX-A1C-080L2 |
| ABB order code | 1SDA123205R1 |
| Product type | Outgoing moulded case circuit breaker configuration |
| Circuit breaker series | ABB Formula A1 |
| Breaker designation | A1N125 |
| Frame rating | 125 A |
| Rated current | 80 A |
| Number of poles | 1 |
| Pole arrangement | Single-pole (1P) |
| Breaking-capacity classification | 25 kA in the ABB Protecta Power catalogue; applicable voltage conditions must be verified |
| Protection technology | Thermal-magnetic |
| Protecta Power product designation | TMA |
| Underlying A1N125 breaker trip type | Fixed thermal-magnetic (TMF) |
| Overload protection | Thermal |
| Short-circuit protection | Magnetic |
| Phase-position designation | L2 |
| Connection arrangement | LSC |
| Switching operation | Manual |
| Maximum stated A1 single-pole cable capacity | 50 mm², subject to the terminal and conductor arrangement |
| ABB underlying protective device reference | 1SDA066693R1 |
| Compatible distribution system | ABB Protecta Power |
| Related L1 variant | EPX-A1C-080L1 |
| Related L3 variant | EPX-A1C-080L3 |
| Primary application | Outgoing circuit protection in compatible low-voltage distribution panelboards |
The ABB EPX-A1C-080L2 is an 80 A single-pole outgoing MCCB configuration designed for the L2 position in compatible ABB Protecta Power low-voltage distribution panelboards.
The EPX-A1C-080L2 has a rated current of 80 A. It belongs to the ABB Formula A1N125 circuit breaker family, which has a 125 A frame designation.
Yes. The EPX-A1C-080L2 is a single-pole (1P) MCCB configuration designed to protect and switch one phase conductor.
L2 identifies the designated phase-position configuration within the ABB Protecta Power outgoing device range. Separate L1 and L3 variants are available for their respective positions.
ABB lists the 80 A A1N125 single-pole outgoing device in its 25 kA Protecta Power range. The applicable breaking capacity must be confirmed at the installation's operating voltage.
Yes. The ABB Formula A1N125 breaker uses thermal-magnetic protection against overload and short-circuit conditions. ABB identifies the underlying 80 A protective device as a fixed thermal-magnetic breaker, while the Protecta Power assembly description uses the TMA designation.
LSC identifies the connection arrangement specified for this Protecta Power outgoing device configuration. The installation must use the correct arrangement for the selected panelboard.
ABB specifies a maximum cable capacity of 50 mm² for A1 single-pole outgoing devices in the Protecta Power system. The actual permissible conductor size depends on the terminals, cable construction and installation requirements.
These are corresponding 80 A single-pole ABB A1N125 outgoing MCCB configurations for different phase positions. The L1, L2 and L3 suffixes identify the intended connection positions within compatible Protecta Power panelboards.
ABB Protecta Power outgoing circuit breakers provide a coordinated approach to low-voltage distribution protection. The EPX-A1C-080L2 combines an 80 A ABB Formula A1N125 protective device with a designated L2 connection configuration, supporting electrical contractors and panel builders in creating organised, dependable distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.