Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SDA073419R1 ABB E4.2H/MS 3200 3p F HR Switch-Disconnector
ABB 1SDA073419R1 E4.2H/MS 3200 3p F HR is a 3200 A three-pole fixed SACE Emax 2 air switch-disconnector with rear horizontal terminals, 690 V AC operational voltage and an 85 kA one-second short-time withstand rating for demanding low-voltage switching and isolation applications.
£10,305.16
Why Choose the ABB E4.2H/MS 3200 3p F HR Switch-Disconnector?
The ABB E4.2H/MS 3200 3p F HR, order code 1SDA073419R1, is a high-capacity three-pole fixed air switch-disconnector from the ABB SACE Emax 2 range. Rated at 3200 A, it is designed for dependable switching and isolation in demanding low-voltage power distribution systems where substantial continuous-current capability and high short-time withstand performance are required.
The E4.2H/MS is a switch-disconnector rather than an automatic circuit breaker equipped with an electronic protection release. Its H-performance construction provides a rated short-time withstand current of 85 kA for 1 s and 75 kA for 3 s, enabling the device to withstand high prospective fault currents while appropriately coordinated protective devices perform automatic fault interruption.
This version combines a fixed three-pole configuration with rear flat horizontal terminals for integration into high-current switchboards. With a rated operational voltage of 690 V AC, rated insulation voltage of 1000 V AC and rated impulse withstand voltage of 12 kV, the E4.2H/MS 3200 provides robust electrical isolation for industrial, infrastructure and critical power distribution applications.
Key Advantages
- High-capacity 3200 A three-pole switch-disconnector for demanding low-voltage power distribution systems.
- 85 kA short-time withstand current for 1 s supports installations with high prospective fault levels.
- 75 kA short-time withstand current for 3 s provides additional coordination capability.
- Rated for operation at up to 690 V AC.
- 1000 V AC insulation voltage and 12 kV impulse withstand voltage.
- Provides dependable switching and isolation without an integrated overcurrent trip unit.
- Fixed installation offers a robust switchboard configuration for permanent high-current connections.
- Rear flat horizontal terminals support practical integration with switchboard busbars.
- Mechanical durability of 20,000 operating cycles.
- Part of the proven ABB SACE Emax 2 low-voltage switching platform.
Key Features
- ABB SACE Emax 2 E4.2H/MS switch-disconnector.
- 3200 A rated uninterrupted current.
- Three-pole (3P) configuration.
- Fixed (F) installation.
- Rear flat horizontal (HR) main terminals.
- 690 V AC rated operational voltage.
- 1000 V AC rated insulation voltage.
- 12 kV rated impulse withstand voltage.
- 85 kA rated short-time withstand current for 1 s.
- 75 kA rated short-time withstand current for 3 s.
- H short-circuit performance level.
- Switch-disconnector construction for switching and isolation duties.
- No integrated electronic overcurrent protection release.
- Electrical durability of 7,000 cycles.
- Mechanical durability of 20,000 cycles.
- Bolt-type main terminals with M12 recommended connection hardware.
- Designed in accordance with applicable IEC requirements.
High-Current Switching and Isolation for Power Distribution
The ABB Emax 2 E4.2H/MS is designed for electrical installations requiring reliable high-current switching and circuit isolation without integrated automatic overcurrent protection. Its combination of a 3200 A continuous current rating, 690 V AC operational capability and short-time withstand ratings of 85 kA for 1 s and 75 kA for 3 s makes it suitable for coordinated power distribution systems where separate protective devices provide fault protection.
The fixed three-pole construction and rear flat horizontal terminals make the 1SDA073419R1 particularly suitable for integration into high-current low-voltage switchboards and power distribution assemblies. With 20,000-cycle mechanical durability and the robust E4.2 Emax 2 architecture, it provides a dependable isolation solution for industrial facilities, infrastructure and other critical electrical installations.
Typical Applications
- Main and secondary isolation in high-current low-voltage switchboards.
- Industrial power distribution systems.
- Bus-section and bus-coupler switching applications.
- Transformer secondary distribution systems.
- Manufacturing plants and process facilities.
- Data centres and critical power infrastructure.
- Large commercial and infrastructure electrical installations.
- Utility and energy distribution systems.
- Switchboards using separate upstream or downstream overcurrent protection.
- High-fault-level systems requiring strong short-time withstand performance.
Technical Specifications
| Series | SACE Emax 2 |
|---|---|
| Product group | Emax2 Air Circuit Breaker |
| Frame / type | E4.2H/MS |
| Order code / MPN | 1SDA073419R1 |
| EAN / GTIN | 8015644772697 |
| Product type | Air switch-disconnector |
| Sub-type | E4.2 |
| Rated current (In) | 3200 A |
| Rated uninterrupted current (Iu) | 3200 A |
| Number of poles | 3P |
| Current type | AC |
| Rated voltage (Ur) | 690 V |
| Rated operational voltage (Ue) | 690 V AC |
| Rated insulation voltage (Ui) | 1000 V AC |
| Rated impulse withstand voltage (Uimp) | 12 kV |
| Rated short-time withstand current (Icw), 1 s | 85 kA |
| Rated short-time withstand current (Icw), 3 s | 75 kA |
| Short-circuit performance level | H |
| Protection release | None – switch-disconnector configuration |
| Electrical durability at Ue ≤ 440 V | 7,000 cycles |
| Electrical durability at Ue 500–690 V | 7,000 cycles |
| Electrical operating frequency | 20 cycles per hour |
| Mechanical durability | 20,000 cycles |
| Mechanical operating frequency | 60 cycles per hour |
| Power loss | 425 W |
| Installation | Fixed |
| Version | F |
| Terminal connection | Rear flat horizontal (HR) |
| Terminal type | Bolt |
| Recommended main-circuit screw | M12 |
| Terminal tightening torque | 70 N·m |
| Standard | IEC |
| Product net width | 384 mm |
| Product net height | 371 mm |
| Product net depth | 270 mm |
| Product net weight | 56 kg |
Frequently Asked Questions
What is the ABB 1SDA073419R1 used for?
The ABB 1SDA073419R1 is a 3200 A three-pole Emax 2 switch-disconnector designed for high-current switching and isolation duties in low-voltage electrical distribution systems.
Is the ABB E4.2H/MS 3200 a circuit breaker or a switch-disconnector?
The E4.2H/MS 3200 is a switch-disconnector. It provides switching and isolation without the electronic overcurrent protection release used on automatic Emax 2 circuit breaker versions, so suitable separate protective devices are required where automatic fault protection is needed.
What is the short-time withstand rating of the ABB 1SDA073419R1?
The E4.2H/MS 3200 has a rated short-time withstand current of 85 kA for 1 s and 75 kA for 3 s, supporting use in demanding power distribution systems with high prospective fault currents.
What does F HR mean in E4.2H/MS 3200 3p F HR?
F identifies the fixed installation version, while HR refers to the rear horizontal terminal arrangement. ABB specifies this product with rear flat horizontal bolt-type main terminals.
What are the dimensions of the ABB 1SDA073419R1?
The ABB 1SDA073419R1 measures approximately 384 mm wide, 371 mm high and 270 mm deep, with a product net weight of approximately 56 kg.
Trusted Switching and Isolation for High-Current Power Systems
ABB SACE Emax 2 switch-disconnectors combine high continuous-current capability, strong short-time withstand performance and robust switching architecture for dependable isolation in industrial, commercial, infrastructure and critical low-voltage power distribution systems.
