Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Mersen 4P125 fourth-pole accessory for compatible M100U3 and M125E3 disconnect switches, rated at 100 A and 600 V AC for four-pole electrical isolation applications.
£30.92
The Mersen 4P125 is a dedicated fourth-pole accessory designed to expand compatible Mersen disconnect switches from three-pole to four-pole operation. It is intended for electrical distribution and industrial control applications where an additional switched pole is required, such as systems that need neutral conductor isolation.
Engineered for use with compatible Mersen M100U3 and M125E3 switches, the 4P125 provides coordinated mechanical switching alongside the main disconnect device. Its modular construction enables panel builders and equipment manufacturers to configure a suitable switching arrangement without replacing the complete switch assembly.
The accessory carries a general-use rating of 100 A at 600 V AC and accepts a broad conductor range. Its compact design, robust terminals and defined tightening requirements support dependable installation in industrial switchboards, machinery panels and electrical distribution equipment.
A fourth-pole accessory allows an appropriate disconnect switch to isolate an additional conductor at the same time as the three main phase conductors. This is commonly required in installations where the neutral conductor must be switched for maintenance, safety or system-design purposes.
The Mersen 4P125 is mechanically coordinated with its compatible switch assembly, helping ensure that all poles change state together. The accessory should be installed only with the specified Mersen switch models and in accordance with the applicable wiring regulations and equipment instructions.
Tick the specs you need, then view products that match.
| Device Type | Accessory | |
|---|---|---|
| Voltage | 600 V | |
| Manufacturer | Mersen | |
| Model | 4P125 | |
| Part number | 4P125 | |
| Product type | Fourth-pole disconnect-switch accessory | |
| Number of additional poles | 1 | |
| General-use current rating | 100 A | |
| Rated voltage | 600 V AC | |
| Compatible switches | M100U3 and M125E3 | |
| Conductor capacity | 10 to 70 mm² | |
| Conductor range | 8 AWG to 1/0 AWG | |
| Conductor stripping length | Approximately 17 to 18 mm | |
| Terminal tightening torque | 6 Nm / 55 lb-in | |
| Approximate width | 27 mm | |
| Approximate depth | 50.5 mm | |
| Approximate height | 100 mm | |
| Application | Additional switched pole for disconnect-switch assemblies |
The Mersen 4P125 adds a fourth switched pole to a compatible three-pole Mersen disconnect switch, allowing an additional conductor such as the neutral to be isolated.
The 4P125 is listed for use with compatible Mersen M100U3 and M125E3 disconnect switches.
The accessory has a general-use rating of 100 A at 600 V AC.
The 4P125 accepts conductors from approximately 10 to 70 mm², equivalent to 8 AWG to 1/0 AWG.
No. It is an additional fourth-pole accessory and must be used with a compatible Mersen disconnect switch assembly.
Mersen disconnect-switch accessories are used by panel builders, electrical engineers and OEM manufacturers to create dependable isolation systems for industrial machinery and electrical distribution equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.