Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
High-speed fuse for critical protection of power semiconductor devices with 160A rating, striker indication, and compliance to IEC and UL standards.
£81.38
The Mersen D301188 is an industrial electrical fuse intended for the protection of compatible power distribution, control and power electronic equipment. Manufactured by Mersen, a recognised specialist in electrical protection, it is suitable for maintenance, repair and replacement applications where the D301188 manufacturer reference is specified.
Industrial fuses are designed to interrupt excessive electrical current before damaging levels of heat and fault energy reach conductors, electronic components or connected machinery. When correctly selected and installed, the Mersen D301188 can support effective fault isolation, improved equipment reliability and reduced operational downtime.
Publicly indexed technical information for this exact reference is limited. The current rating, voltage rating, fuse class, breaking capacity, time-current characteristic, terminal arrangement and physical dimensions should therefore be verified from the product label, original component or official Mersen documentation before installation.
An industrial fuse opens the protected circuit when electrical current exceeds its defined operating limits. This helps reduce the risk of excessive heating, conductor damage and failure of connected electrical or electronic components during a fault.
Correct fuse selection is essential. The replacement must match the required current rating, voltage rating, utilisation category, operating speed, breaking capacity and mechanical format. The Mersen D301188 should only be installed where this exact reference or a formally approved equivalent is specified.
Tick the specs you need, then view products that match.
| Current | 160 A | |
|---|---|---|
| Voltage | 1250 V | |
| Device Type | Fuse link | |
| Fuse Type | Semiconductor | |
| Fuse Class | aR | |
| Fuse Indication | Striker | |
| Item number | D301188 | |
| Catalogue No | PC70UD13C160PA | |
| Description | Square Body High-Speed Fuse Protistor® Size 70 aR 1250VAC IEC 1300VAC UL 160A Striker Plain Blades | |
| EAN/UPC Code | 3605340337952 | |
| Rated voltage AC UL | 1300 V | |
| Rated voltage AC IEC | 1250 V | |
| Ampere Rating | 160 A | |
| AC or DC | AC | |
| Speed/Characteristic | aR | |
| Fuse Size | 72 | |
| Mounting | Clip | |
| Clearing I2t At Rated Voltage | 21000 A²s | |
| Melting I2t | 2570 A²s | |
| AC Max I.R./Breaking Capacity | I1: 126 kA | |
| Indication System | Yes | |
| Indication System Type | Striker | |
| Connection/Terminal Material | Silver-Plated Copper | |
| Connection/Terminal Type | Plain Blades | |
| Product Width | 39.8 mm | |
| Product Length | 123.4 mm | |
| Product Height | 49.5 mm | |
| Sell Pack Quantity | 3 EA | |
| Sell Pack Weight | 1.092 kg | |
| Sell Pack Width | 140 mm | |
| Sell Pack Length | 143 mm | |
| Sell Pack Height | 65 mm | |
| Product group | Semiconductor Protection Fuses | |
| Body/Insulating Material | Ceramic | |
| Product Weight | 0.364 kg | |
| Power Dissipation at Rated Current Value | 45 W | |
| HS Code | 85351000 |
The Mersen D301188 is intended to provide electrical circuit protection within compatible industrial power, control and electronic equipment.
It may be used where the original component or equipment documentation specifies Mersen D301188. All electrical and mechanical characteristics must be checked before installation.
Verify the rated current, rated voltage, fuse class, breaking capacity, operating characteristic, terminal arrangement and physical dimensions.
It may be fitted within compatible industrial control panels, distribution assemblies, machinery and power electronic equipment.
An alternative should only be used when it is approved by the equipment manufacturer and matches every required electrical, performance and dimensional specification.
Mersen fuses are used by equipment manufacturers, electrical engineers and maintenance professionals to help protect critical industrial power and control systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.