OTP63T3M ABB 63A 3-Pole 30kW IP65 Plastic Enclosed Safety Switch

Why Choose the ABB OTP63T3M 63A Three-Pole IP65 Plastic Safety Switch?

The ABB OTP63T3M is a robust 63 A, three-pole plastic enclosed safety switch-disconnector designed for dependable electrical isolation of industrial machinery, motors and electrical equipment. Part of ABB's established OTP enclosed safety switch range, it combines reliable mechanical switching with a durable IP65-rated enclosure for demanding industrial and commercial installations.

Rated for 63 A and 30 kW at 400 V AC under AC-23A utilisation conditions, the OTP63T3M provides a practical local isolation point for three-phase motors and inductive electrical loads. Its three-pole switching mechanism allows all three phase conductors to be disconnected together, supporting safer maintenance, servicing and equipment inspection.

The switch features a black selector operating handle, an interlocked enclosure cover and a defeatable interlocking mechanism for authorised servicing. Its UV-resistant, glass-fibre-reinforced plastic enclosure offers protection against dust and water ingress, while the integrated padlocking provision helps prevent unintended operation during maintenance.

Supplied with one normally open auxiliary contact, neutral and protective earth terminals, and metric cable-entry knockouts, the ABB OTP63T3M provides a convenient enclosed switching solution. Its compact 200 × 145 × 90 mm dimensions make it suitable for installation close to motors, conveyors, pumps and industrial production machinery.

Key Advantages

• 63 A AC-23A operational current rating at 380–415 V AC.
• 30 kW motor switching capacity at 400 V AC under AC-23A conditions.
• Three-pole (3P) switching for reliable isolation of three-phase equipment.
• IP65 enclosure protection against dust ingress and water jets.
• UV-resistant, glass-fibre-reinforced plastic housing for industrial applications.
• Black selector handle with clear ON/OFF operation.
• Padlockable handle supporting controlled maintenance isolation.
• Interlocked enclosure cover with defeatable interlocking for authorised access.
• One factory-mounted normally open auxiliary contact for compatible control and indication circuits.
• Fixed neutral and protective earth terminals included.
• Metric cable-entry knockouts for convenient cable installation.
• Compact enclosure suitable for mounting close to machinery.
• Designed for use as a local safety switch or maintenance isolator.
• Part of ABB's established industrial enclosed switch-disconnector range.

Key Features

• ABB OTP63T3M plastic enclosed safety switch.
• 63 A operational current at 400 V AC, AC-23A.
• 30 kW motor power rating at 400 V AC.
• Three main switching poles.
• Manual rotary ON/OFF operation.
• Black selector-type operating handle.
• Padlockable operating mechanism.
• Interlocked enclosure cover.
• Defeatable cover interlock for authorised maintenance.
• IP65 dust-tight and water-jet-resistant enclosure.
• Grey, UV-resistant plastic housing.
• Glass-fibre-reinforced enclosure construction.
• 2 × M32 + M16 metric cable-entry knockouts per side.
• Top and bottom cable-entry arrangements.
• One normally open auxiliary contact included.
• Compatible auxiliary contact expansion up to 2 NO + 2 NC.
• Fixed neutral and protective earth terminals.
• Compact enclosure measuring 200 × 145 × 90 mm.
• Suitable for fixed installation near industrial machinery.

Technical Specifications

• Manufacturer: ABB
• Series: OTP Enclosed Safety Switches
• Model: OTP63T3M
• ABB order code: OTP63T3M
• ABB manufacturer product ID: 1SCA022608R2910
• Product type: Plastic enclosed safety switch-disconnector
• Product group: 311004-Plastic Enclosed Switches (OTP)
• Rated operational current AC-23A at 380–415 V AC: 63 A
• Rated operational current AC-23A at 500 V AC: 50 A
• Rated operational current AC-23A at 690 V AC: 35 A
• Rated operational current AC-22A at 380–415 V AC: 63 A
• Rated operational current AC-22A at 500 V AC: 63 A
• Rated operational current AC-22A at 690 V AC: 63 A
• Rated operational power AC-23A at 230 V AC: 18.5 kW
• Rated operational power AC-23A at 400 V AC: 30 kW
• Rated operational power AC-23A at 500 V AC: 30 kW
• Rated operational power AC-23A at 690 V AC: 30 kW
• Conventional enclosed thermal current: 115 A
• Rated insulation voltage (Ui): 750 V
• Number of poles: 3
• Pole configuration: 3P
• Switching operation: Manual ON/OFF
• Handle type: Black selector handle
• Handle locking: Padlockable
• Cover interlock: Interlocked with defeatable interlocking
• Ingress protection rating: IP65
• Enclosure material: Glass-fibre-reinforced plastic
• Enclosure colour: Grey
• UV resistance: UV-resistant enclosure construction
• Cable-entry positions: Top and bottom
• Cable-entry arrangement: 2 × M32 + M16 per side
• Factory-mounted auxiliary contacts: 1 NO
• Maximum auxiliary contact configuration: 2 NO + 2 NC
• Neutral terminal: Included
• Protective earth terminal: Included
• Enclosure height: 200 mm
• Enclosure width: 145 mm
• Enclosure depth: 90 mm
• Dimensions (H × W × D): 200 × 145 × 90 mm
• Net weight: 1.0 kg
• EAN / GTIN: 6417019197876
• Applicable switch-disconnector standard: IEC/EN 60947-3

Reliable Three-Phase Motor and Machinery Isolation

The ABB OTP63T3M is designed to provide a dedicated electrical isolation point near industrial machinery. Its three-pole switching mechanism disconnects the three phase conductors together, helping maintenance personnel isolate equipment before inspection, repair or servicing.

At 400 V AC, the switch provides a 63 A AC-23A operational current rating and a 30 kW motor switching rating. These specifications make it suitable for appropriately rated industrial motor circuits and other inductive-load applications.

The AC-23A utilisation category is relevant because motor circuits can impose demanding switching conditions. Unlike purely resistive loads, inductive loads may produce significant switching stresses, making the manufacturer's operational current and power ratings important when selecting a suitable isolator.

The OTP63T3M also has a 115 A conventional enclosed thermal current. This represents a separate thermal characteristic and should not be confused with its 63 A AC-23A operational current rating at 400 V AC.

For installations operating at different voltages, the manufacturer's voltage-dependent ratings must be considered. At 500 V AC, the AC-23A operational current is 50 A, while at 690 V AC, it is 35 A.

The black selector handle provides clear manual ON/OFF operation. Its padlocking capability supports controlled isolation procedures, helping prevent the switch from being operated unintentionally while authorised personnel are working on connected equipment.

IP65 Protection and Practical Industrial Installation

The OTP63T3M is housed in a grey, UV-resistant, glass-fibre-reinforced plastic enclosure designed to withstand the demands of industrial environments. Its IP65 rating provides protection against dust ingress and water jets when the enclosure and cable entries are correctly installed and sealed.

The enclosure includes an interlocked cover that helps prevent normal access to internal components while the switch is in the ON position. A defeatable interlocking feature is provided for authorised maintenance activities, subject to safe working procedures and the manufacturer's instructions.

Top and bottom cable-entry knockouts provide a 2 × M32 + M16 arrangement per side. These openings accommodate appropriately selected metric cable glands, allowing convenient routing of power and control cables into the enclosure.

The switch is supplied with one normally open auxiliary contact, which can be used in suitable control or indication circuits. Compatible auxiliary contact accessories can provide additional signalling functions where required by the installation design.

Neutral and protective earth terminals are included to support practical wiring. The neutral terminal is separate from the three main switched poles and should not be interpreted as providing switched-neutral isolation.

With dimensions of 200 × 145 × 90 mm, the OTP63T3M is suitable for mounting near motors, pumps, conveyors and industrial machinery where a compact enclosed safety switch is required.

Typical Applications

• Industrial three-phase motor isolation.
• Local safety switching for production machinery.
• Electrical isolation of motors rated within the applicable AC-23A limits.
• Industrial pumping systems.
• Ventilation and extraction equipment.
• Conveyor and material handling installations.
• Food processing and packaging machinery.
• Manufacturing and production equipment.
• Industrial maintenance and servicing isolation points.
• Commercial and industrial electrical installations.
• OEM machinery and equipment manufacturing.
• Outdoor electrical equipment requiring appropriately installed IP65 protection.
• Local isolation points incorporating auxiliary status indication.