Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OS20FP-A is a 20 A four-pole steel enclosed switch fuse with BS88 A1 fuse links, IP65 protection, a powder-coated RAL 7035 enclosure, padlockable pistol-grip handle and removable gland plates for indoor electrical isolation and fused switching.
£194.74
The ABB OS20FP-A is a 20 A, four-pole steel enclosed switch fuse designed to provide dependable electrical isolation and fused switching for industrial and commercial electrical installations. Part of ABB's OS enclosed switch fuse range, it combines a manually operated switch-disconnector, BS88 fuse protection and a durable IP65-rated mild steel enclosure in one integrated assembly.
Featuring a four-pole switching configuration, the OS20FP-A is suitable for appropriately designed three-phase and neutral switching applications. Its 20 A thermal rating and compatibility with BS88 A1 fuse links make it a practical choice for electrical distribution circuits, machinery supplies and local equipment isolation.
The switch fuse is housed in a RAL 7035 light grey, powder-coated steel enclosure measuring 300 × 300 × 150 mm. It features a padlockable pistol-grip operating handle, hinged lockable door and removable top and bottom gland plates for convenient cable installation. ABB supplies this enclosed switch fuse assembly with fuse links, making it a practical solution for fixed indoor electrical installations.
The ABB OS20FP-A combines a four-pole switch-disconnector with BS88 fuse links to provide a convenient local isolation and fused switching arrangement. The manually operated mechanism enables the connected conductors to be switched together, while appropriately selected fuse links provide overcurrent and short-circuit protection according to their individual characteristics and the circuit design.
The 20 A enclosed switch fuse is suitable for electrical installations requiring a robust switching point with a protective steel housing. Its IP65 enclosure helps prevent the ingress of dust and water jets when all covers, seals and cable entries are correctly installed. The powder-coated RAL 7035 finish provides additional surface protection for the steel enclosure.
The padlockable pistol-grip handle supports controlled isolation procedures, while the hinged lockable door allows authorised access for installation, inspection and fuse maintenance. Removable gland plates at the top and bottom simplify cable routing. ABB identifies this steel enclosed range as unsuitable for external installation, so the OS20FP-A should be installed indoors in an environment compatible with its enclosure and electrical ratings.
Tick the specs you need, then view products that match.
| Mounting Type | Base / panel |
|---|
The ABB OS20FP-A is a 20 A four-pole steel enclosed switch fuse used for manual electrical isolation and fused switching in industrial and commercial installations.
The OS20FP-A has a 20 A rated thermal current. The suitability of the complete circuit also depends on the selected fuse characteristics, operating voltage and connected load.
The ABB OS20FP-A has four switching poles, making it suitable for appropriately designed electrical installations requiring simultaneous switching of four conductors.
The OS20FP-A is designed for BS88 A1 fuse links. The correct fuse rating and characteristics must be selected according to the circuit protection requirements.
Yes. ABB specifies that its OS steel enclosed switch fuse assemblies are supplied with fuse links. The installed fuse ratings should be checked against the requirements of the intended circuit.
The OS20FP-A has an IP65 enclosure protection rating, providing dust-tight protection and resistance to water jets when correctly installed with suitable cable entry fittings.
The enclosure is manufactured from mild steel with a textured powder-coated finish in RAL 7035 light grey.
The ABB OS20FP-A enclosure measures 300 mm high × 300 mm wide × 150 mm deep.
Yes. The OS20FP-A features a padlockable pistol-grip operating handle, supporting controlled electrical isolation and maintenance procedures.
Yes. The enclosure is supplied with removable gland plates at the top and bottom, allowing suitable cable entry arrangements to be installed.
Yes. The steel enclosure features a hinged door with a locking mechanism to help control access to the internal switching and fuse components.
No. Although the OS20FP-A has an IP65 enclosure rating, ABB identifies this steel enclosed switch fuse range as not suitable for external installation. It should be installed indoors in a suitable environment.
ABB lists AC-23 operational power ratings of 7.5 kW at 400 V AC, 11 kW at 500 V AC and 15 kW at 690 V AC for the 20 A OS enclosed switch fuse configuration.
The OS20FP-A is a four-pole switch fuse, whereas the OS20TPN-A is a three-pole switch fuse with a detachable neutral link. The appropriate configuration depends on whether the installation requires four switched poles or three switched poles with a separate neutral link.
ABB OS enclosed switch fuses are designed for electrical contractors, industrial maintenance engineers, panel builders and facility managers requiring dependable fused switching and local isolation. The ABB OS20FP-A combines a 20 A four-pole switch fuse, BS88 A1 fuse compatibility, IP65 powder-coated steel enclosure, padlockable operating handle and removable gland plates for practical indoor industrial and commercial electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.