Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OTU63B3MS3 (1SCA132686R1001) 63 A three-pole IP65 polycarbonate enclosed switch-disconnector with a 37 kW motor switching rating at 415 V AC, black padlockable rotary handle, fixed neutral and protective earth terminals, and two 40.5 mm cable-entry knockouts at the top and bottom.
£83.30
The ABB OTU63B3MS3 (1SCA132686R1001) is a high-quality 63 A, 3-pole plastic enclosed switch-disconnector designed for reliable manual switching and electrical isolation in industrial machinery, motor installations and low-voltage distribution systems. Part of the ABB OTU enclosed switch range, it combines robust polycarbonate construction, an IP65 protection rating and a practical black rotary operating handle in one complete assembly.
Rated at 63 A under AC-23A conditions at 415 V AC, the OTU63B3MS3 is specified in the supplied product description for 37 kW motor switching applications. Its three-pole switching mechanism allows the simultaneous disconnection of three main conductors, making it suitable for appropriately rated three-phase electrical installations.
The OTU63B3MS3 features a UV-protected, glass-reinforced polycarbonate enclosure designed for demanding indoor and suitably assessed outdoor environments. Its IP65 ingress protection helps protect the internal switching mechanism against dust and water jets when correctly installed.
Supplied with a black, round rotary handle, neutral and protective earth terminals, and preformed cable-entry knockouts, this ABB enclosed isolator offers a practical solution for industrial electrical contractors, machinery manufacturers, maintenance engineers and panel builders.
The ABB OTU63B3MS3 provides a reliable manual switching point for three-phase electrical installations. Its three-pole mechanism enables the main conductors to be switched together through a single external rotary handle, supporting controlled disconnection of electrical supplies during maintenance and equipment servicing.
With a 63 A AC-23A rating at 415 V AC, the switch is intended for appropriately rated motor and inductive-load switching duties. The supplied specification identifies a 37 kW motor switching capability, making the OTU63B3MS3 relevant to a wide range of industrial machinery and motor applications.
The AC-23A utilisation category is particularly important when selecting a switch-disconnector for motor loads. Unlike a simple resistive-load current rating, AC-23A relates to switching duties involving motors or other highly inductive loads. Engineers should therefore assess the operating voltage, load characteristics and applicable utilisation category when specifying the switch.
The OTU63B3MS3 also carries a 63 A AC-22A operational current rating at 415 V AC, providing a specified switching capability for suitable mixed resistive and inductive loads.
Although it provides manual electrical isolation, the OTU63B3MS3 is not an automatic circuit breaker or motor overload relay. It does not independently provide automatic overload or short-circuit tripping. Appropriate protective devices must be incorporated into the complete electrical installation.
The glass-reinforced polycarbonate enclosure is designed to protect the internal switching mechanism from environmental exposure and mechanical demands commonly encountered in industrial installations.
Its IP65 ingress protection rating indicates protection against dust ingress and water jets when the complete enclosure is correctly assembled and installed. This makes the switch suitable for many industrial environments where dust, moisture or routine washdown exposure must be considered.
The enclosure is also UV protected, supporting installation in suitably assessed outdoor environments. Outdoor suitability must still take account of ambient temperature, direct weather exposure, mounting position, cable-entry sealing and other site-specific conditions.
The OTU63B3MS3 measures 200 mm high × 146 mm wide × 139 mm deep, allowing installers to plan mounting clearances and cable routing before installation.
The OTU63B3MS3 is supplied with a black round rotary handle featuring clear I–O and ON–OFF markings. The handle provides an externally accessible operating point without requiring routine access to the internal switching mechanism.
The handle can accommodate up to three padlocks, allowing it to be incorporated into suitable maintenance lockout procedures. Padlocking helps prevent unauthorised operation while maintenance activities are being carried out, provided the installation follows the applicable electrical safety procedures.
Unlike certain ABB enclosed safety switch variants, the OTU63B3MS3 enclosure cover is not interlocked. This distinction is important when comparing ABB OTU models and selecting equipment for installations with specific access-control requirements.
The absence of a cover interlock does not remove the need for safe isolation, verification of dead conditions or compliance with relevant electrical safety procedures before accessing internal electrical components.
The ABB OTU63B3MS3 includes two 40.5 mm diameter cable-entry knockouts at both the top and bottom of the enclosure. These openings provide flexibility when arranging incoming and outgoing electrical cables.
The knockout configuration supports installations using two parallel cables, subject to suitable cable glands, cable dimensions and the available wiring space. Compression cable glands must be selected and ordered separately.
To maintain the enclosure's IP65 rating, all fitted cable-entry components and unused openings must be appropriately sealed. Installers should follow ABB's installation instructions and the cable gland manufacturer's requirements.
The switch includes a fixed neutral terminal and protective earth terminal. These connections support suitable three-phase electrical arrangements, including systems where a neutral conductor is present but does not need to be switched.
The fixed neutral terminal is separate from the three main switching poles and must not be interpreted as a fourth switched pole.
No auxiliary contacts are included as standard. Where suitable control or status indication is required, compatible ABB auxiliary contact accessories can be selected, subject to the manufacturer's maximum supported configuration of 2 normally open and 2 normally closed contacts.
Tick the specs you need, then view products that match.
| Device Type | Enclosed switch disconnector | |
|---|---|---|
| Material | Polycarbonate |
The ABB OTU63B3MS3 is a 63 A, three-pole plastic enclosed switch-disconnector designed for manual switching and electrical isolation in industrial machinery, motor installations and low-voltage electrical distribution systems. It features an IP65 polycarbonate enclosure and a black rotary operating handle.
The OTU63B3MS3 has a rated operational current of 63 A under AC-23A conditions at 415 V AC. Its AC-22A operational current rating at 415 V AC is also 63 A.
The supplied product specification identifies the OTU63B3MS3 with a 37 kW motor switching rating at 415 V AC under AC-23 conditions. Suitability depends on the motor characteristics, switching duty and complete electrical installation.
The OTU63B3MS3 has three main switching poles. These are operated together through a single rotary handle, making the switch suitable for appropriately rated three-phase electrical circuits.
The OTU63B3MS3 has an IP65-rated enclosure, providing protection against dust ingress and water jets when correctly installed. Suitable cable glands and sealing arrangements are required to maintain the protection rating.
The OTU63B3MS3 uses a rigid glass-reinforced polycarbonate enclosure. The enclosure is UV protected and designed for suitable indoor and outdoor industrial electrical installations.
The OTU63B3MS3 features a black round rotary operating handle with I–O and ON–OFF position indication. The corresponding red and yellow handle variant has a different ABB order code.
Yes. The OTU63B3MS3 has a padlockable operating handle designed to accommodate up to three padlocks. This supports controlled maintenance isolation when used in accordance with applicable electrical safety procedures.
No. ABB specifies that the OTU63B3MS3 enclosure cover is not interlocked. Appropriate safe isolation procedures must always be followed before accessing internal electrical components.
Yes. The OTU63B3MS3 includes a fixed neutral terminal and protective earth terminal. The fixed neutral terminal is separate from the three main switching poles.
No auxiliary contacts are included as standard. Compatible accessories can be selected where required, subject to a maximum auxiliary contact configuration of 2 normally open and 2 normally closed contacts.
The OTU63B3MS3 provides two 40.5 mm diameter knockout openings at the top and two at the bottom of the enclosure. Suitable cable glands must be ordered separately.
The OTU63B3MS3 enclosure measures 200 mm high × 146 mm wide × 139 mm deep. Its approximate unit weight is 0.8 kg.
The OTU63B3MS3 features a black round operating handle, while the OTU63BA3MS3 features a red and yellow round handle. Both are three-pole enclosed switch-disconnectors with a 63 A AC-23A rating at 415 V AC, but the correct model should be selected according to the installation requirements.
No. The OTU63B3MS3 is a manually operated switch-disconnector rather than an automatic circuit breaker or motor overload relay. Suitable overload and short-circuit protective devices must be selected separately for the complete installation.
The ABB manufacturer part number for the OTU63B3MS3 is 1SCA132686R1001. The product belongs to ABB product group 311004 – Plastic Enclosed Switches (OTP).
The ABB OTU63B3MS3 combines 63 A three-pole switching, a specified 37 kW motor switching rating at 415 V AC, a durable IP65 glass-reinforced polycarbonate enclosure, a black padlockable rotary handle and flexible cable-entry knockouts. Its complete enclosed construction makes it a practical choice for electrical contractors, industrial maintenance teams, machinery manufacturers and panel builders requiring dependable manual electrical isolation.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.