Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OT400ESUR3TZ (1SCA102323R1001) 400 A three-pole stainless steel enclosed safety switch-disconnector with IP65 acid-proof stainless steel enclosure, stainless steel pistol-grip handle, bottom-only cable entries, four ring-flange openings, 25.5 mm control cable knockout and 2NO + 1NC auxiliary contacts. Dimensions 800 x 400 x 230 mm.
£4,896.62
The ABB OT400ESUR3TZ (1SCA102323R1001) is a heavy-duty 400 A three-pole stainless steel enclosed safety switch-disconnector designed for dependable electrical isolation and manual load switching in demanding industrial environments. Part of ABB's OT enclosed safety switch range, it combines high-current switching capability with a corrosion-resistant, acid-proof stainless steel enclosure and a bottom cable entry arrangement.
Rated for 400 A AC-23A operation at 415 V AC, the OT400ESUR3TZ offers a corresponding 220 kW motor switching capability at this voltage. Its three-pole switching mechanism allows the three phase conductors to be disconnected simultaneously, providing a clearly identifiable local isolation point for industrial machinery, motor feeders and electrical distribution equipment.
The switch is housed in an IP65-rated stainless steel enclosure with a hinged cover and a stainless steel pistol-grip operating handle. Its corrosion-resistant construction makes it particularly suitable for appropriately designed installations in environments where moisture, cleaning processes or corrosive atmospheric conditions may make conventional painted steel enclosures less desirable.
A key feature of the OT400ESUR3TZ is its bottom-only main cable entry arrangement, incorporating four ring-flange openings and a separate 25.5 mm control cable knockout. The top cable entry area is blanked, allowing incoming and outgoing cable routing to be concentrated at the bottom of the enclosure. The switch is supplied with 2NO + 1NC auxiliary contacts, a protective earth terminal and an enclosure measuring 800 × 400 × 230 mm.
The ABB OT400ESUR3TZ is designed to provide a clearly identifiable isolation point for three-phase electrical systems operating at substantial current levels. Its three-pole switch-disconnector mechanism allows all three phase conductors to be opened together, supporting planned maintenance, inspection and servicing of industrial machinery and electrical distribution equipment.
The stainless steel enclosure is a significant advantage in demanding environments. ABB describes this enclosed safety switch range as using acid-proof stainless steel sheet, making it suitable for appropriately specified applications where corrosion resistance is important. Such environments may include food processing facilities, water treatment plants, industrial washdown areas and other installations exposed to moisture or corrosive atmospheres.
The enclosure provides an IP65 protection rating, meaning it is designed to prevent dust ingress and resist water jets under the applicable test conditions. Maintaining this rating requires correct installation, suitable cable glands, effective sealing and appropriate treatment of all cable entry openings. The actual environmental suitability must be assessed against the chemicals, cleaning processes and operating conditions present at the installation site.
The stainless steel pistol-grip operating handle provides manual ON/OFF switching and supports OFF-position padlocking. This helps prevent unintended operation during maintenance when used as part of an appropriate isolation and lockout procedure. Personnel must still verify that the electrical circuit is de-energised before commencing work.
A key installation feature is the bottom-only cable entry arrangement. The OT400ESUR3TZ provides four ring-flange openings for main cables and a separate 25.5 mm control cable knockout at the bottom of the enclosure. The top entry area is blanked, helping installers route cables from below without creating unnecessary openings in the upper enclosure surface.
The 2NO + 1NC auxiliary contacts can be integrated into appropriately designed control and indication circuits. They may be used to provide switch-position feedback or support interlocking functions, subject to their electrical ratings and the overall control system design.
As a switch-disconnector rather than an automatic protective device, the OT400ESUR3TZ does not independently provide overload or short-circuit protection. Suitable upstream circuit breakers, fuses or other protective devices must be incorporated into the installation, and the switch must be selected according to the applicable operational current, voltage and utilisation-category ratings.
Tick the specs you need, then view products that match.
| Device Type | Enclosed safety switch / isolator | |
|---|---|---|
| Material | Stainless Steel |
The ABB OT400ESUR3TZ is a 400 A three-pole stainless steel enclosed safety switch-disconnector used for manual load switching and local electrical isolation of industrial machinery, motor feeders and three-phase distribution equipment.
The OT400ESUR3TZ has a 400 A AC-23A operational current rating at 415 V AC. The applicable rating depends on the supply voltage, utilisation category and characteristics of the connected load.
The switch features a three-pole (3P) configuration, allowing simultaneous disconnection of the three phase conductors. It does not include a fourth switched neutral pole.
ABB lists an AC-23A motor switching capability of 220 kW at 400–415 V AC and 355 kW at 690 V AC. Motor suitability must be checked against the corresponding current ratings and operating conditions.
The enclosure is manufactured from acid-proof stainless steel sheet, offering corrosion resistance for appropriately specified industrial environments. Suitability for particular chemicals or cleaning agents must be assessed separately.
The OT400ESUR3TZ has an IP65-rated stainless steel enclosure, providing protection against dust ingress and water jets when correctly installed with suitable cable entry fittings and sealing arrangements.
The switch includes a stainless steel pistol-grip operating handle with I-O / ON-OFF operation. The handle supports OFF-position padlocking for controlled maintenance isolation.
The OT400ESUR3TZ uses a bottom-only cable entry arrangement. The top entry area is blanked, while the bottom provides four ring-flange openings for main cables and a separate 25.5 mm control cable knockout.
The enclosure provides four ring-flange openings at the bottom for main cable entry. Compatible cable flanges and compression glands must be selected separately to suit the installation.
Both are 400 A three-pole IP65 stainless steel enclosed safety switches. The OT400ESUR3TZ has bottom-only cable entries, whereas the OT400ERRR3TZ provides cable entry openings at both the top and bottom. The appropriate model depends on the cable routing requirements.
Yes. The OT400ESUR3TZ is supplied with 2 normally open (2NO) and 1 normally closed (1NC) auxiliary contacts. These can be used for suitable switch-position indication or control circuit interlocking applications.
The enclosure measures 800 × 400 × 230 mm (H × W × D). ABB's enclosed switch catalogue lists an approximate unit weight of 34 kg.
The acid-proof stainless steel enclosure provides enhanced corrosion resistance compared with conventional painted steel. It is suitable for appropriately specified demanding environments, although resistance to individual chemicals and cleaning agents must be assessed for each installation.
No. The OT400ESUR3TZ is a switch-disconnector intended for manual switching and electrical isolation. It does not replace a circuit breaker, fuse or motor overload relay, so suitable protective devices must be provided separately.
The ABB model and order code is OT400ESUR3TZ, and its manufacturer product identification number is 1SCA102323R1001. It belongs to ABB product group 311019-Metal Enclosed (Loadbreak).
The ABB OT400ESUR3TZ combines a 400 A three-pole switching mechanism, acid-proof stainless steel enclosure, IP65 ingress protection, stainless steel operating handle and bottom-only ring-flange cable entry arrangement. With integrated 2NO + 1NC auxiliary contacts and a robust surface-mounted construction, it provides a dependable high-current isolation solution for industrial environments where corrosion resistance and installation flexibility are important.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.