1SCA102318R1001 ABB 400A 3-Pole IP65 Stainless Steel Enclosed Safety Switch – Top and Bottom Cable Entries

Why Choose the ABB OT400ERRR3TZ 400A 3-Pole Stainless Steel Enclosed Safety Switch?

The ABB OT400ERRR3TZ (1SCA102318R1001) is a heavy-duty 400 A, 3-pole stainless steel enclosed safety switch-disconnector designed for dependable manual electrical isolation in demanding industrial environments. Featuring an acid-resistant stainless steel enclosure, IP65 protection and top and bottom cable-entry arrangements, this ABB safety switch is particularly suited to installations where corrosion resistance, equipment protection and reliable high-current switching are important.

Part of ABB's OT enclosed safety switch range, the OT400ERRR3TZ combines a robust stainless steel housing with a matching stainless steel operating handle, a mechanically operated three-pole switch-disconnector and factory-fitted auxiliary contacts. The complete assembly is designed for professional industrial electrical installations requiring a clearly identifiable ON/OFF isolation point.

The switch has a 400 A AC-23A operational current rating at 415 V AC, with a corresponding 220 kW motor switching rating. At 690 V AC, ABB specifies an AC-23A motor switching capability of 355 kW at 400 A. These ratings make the OT400ERRR3TZ suitable for appropriately engineered high-power motor and industrial load-switching applications.

Its IP65 stainless steel enclosure measures 800 × 400 × 230 mm and weighs approximately 32 kg. The enclosure includes hinged access, a locking arrangement, cover interlocking and an arrangement for routing main power cables through separately selected cable-entry flanges.

Key Advantages

• 400 A enclosed safety switch for high-current industrial electrical isolation.
• Three-pole switch-disconnector for simultaneous manual switching of three main conductors.
• Acid-resistant stainless steel enclosure for demanding industrial environments.
• IP65 ingress protection against dust and water jets when correctly installed.
• 220 kW AC-23A motor switching capability at 415 V AC.
• 355 kW AC-23A motor switching capability at 690 V AC.
• Stainless steel operating handle with clear I–O / ON–OFF indication.
• Two normally open and one normally closed auxiliary contacts supplied as standard.
• Auxiliary contacts wired to terminal blocks for convenient connection.
• Cover interlock with defeatable interlock facility supports controlled access arrangements.
• Hinged enclosure with lock provides practical access for authorised maintenance.
• Top and bottom main cable-entry positions provide installation flexibility.
• Four ring-flange positions per cable-entry side support suitable high-current cable routing.
• 25 mm control cable knockout supports separate auxiliary and control wiring.
• Protective earth terminal included for appropriate electrical connection.
• EMC-approved product configuration for suitable industrial applications.
• Genuine ABB equipment with traceable manufacturer identification.

Key Features

• Manufacturer: ABB.
• Model: OT400ERRR3TZ.
• ABB order code: OT400ERRR3TZ.
• Manufacturer part number: 1SCA102318R1001.
• Product series: ABB OT.
• Product type: Stainless steel enclosed safety switch-disconnector.
• Rated operational current: 400 A.
• Number of poles: 3.
• Rated AC-23A motor power at 415 V: 220 kW.
• Rated AC-23A motor power at 690 V: 355 kW.
• Enclosure material: Acid-resistant stainless steel sheet.
• Ingress protection: IP65.
• Operating handle: Stainless steel.
• Operating positions: I–O / ON–OFF.
• Auxiliary contacts included: 2 NO + 1 NC.
• Auxiliary contact terminals: Pre-wired to terminal blocks.
• Cover interlock: Included.
• Defeatable cover interlock: Included.
• Hinged cover: Yes.
• Enclosure lock: Included.
• Main cable entries: Top and bottom.
• Ring-flange positions: Four per side.
• Control cable knockout: 25 mm.
• Protective earth terminal: Included.
• EMC-approved configuration: Yes.
• Enclosure dimensions: 800 × 400 × 230 mm.
• Approximate weight: 32 kg.

Technical Specifications

• Manufacturer: ABB
• Brand: ABB
• Product family: OT Enclosed Safety Switches
• Model: OT400ERRR3TZ
• ABB order code: OT400ERRR3TZ
• Manufacturer part number: 1SCA102318R1001
• ABB product group: 311019 – Metal Enclosed (Loadbreak)
• Product description: 400A 3P Stainless Steel Enclosed Safety Switch, Top and Bottom Cable Entries
• Product type: Enclosed safety switch-disconnector
• Switching operation: Manual ON/OFF
• Number of main poles: 3
• Rated operational current AC-23A at 415 V: 400 A
• Rated operational current AC-23A at 690 V: 400 A
• Maximum motor output AC-23A at 415 V: 220 kW
• Maximum motor output AC-23A at 690 V: 355 kW
• Enclosure material: Acid-resistant stainless steel sheet
• Enclosure protection rating: IP65
• Operating handle material: Stainless steel
• Operating handle indication: I–O / ON–OFF
• Auxiliary contacts fitted: 2 NO + 1 NC
• Maximum auxiliary contact configuration: 2 NO + 1 NC
• Auxiliary contact wiring: Connected to terminal blocks
• Cover interlock: Included
• Defeatable interlock: Included
• Hinged enclosure cover: Included
• Enclosure locking arrangement: Included
• Protective earth terminal: Included
• Control cable entry: 25 mm knockout
• Main cable-entry arrangement: Open flange positions
• Main cable-entry locations: Top and bottom
• Ring-flange positions: 4 per side
• Cable flanges included: 0
• Compatible cable flange accessory: ABB KOT61007
• Compatible EMC cable flange accessory: ABB KOT62296
• Compatible flange cover accessory: ABB KOT61008
• EMC approval: Yes
• Enclosure height: 800 mm
• Enclosure width: 400 mm
• Enclosure depth: 230 mm
• Dimensions (H × W × D): 800 × 400 × 230 mm
• Approximate unit weight: 32 kg
• Primary function: Manual electrical isolation and load switching
• Automatic overload protection: Not included
• Automatic short-circuit tripping: Not included
• Changeover switching: Not included

High-Current Electrical Isolation with Stainless Steel Protection

The ABB OT400ERRR3TZ is designed for installations requiring a robust manual electrical isolation point. Its three-pole switching mechanism enables simultaneous disconnection of three main conductors through a single externally accessible operating handle.

With a 400 A AC-23A rating at 415 V AC, the switch can be selected for appropriately rated industrial motor and inductive-load switching duties. ABB also specifies a 400 A AC-23A rating at 690 V AC, with a corresponding motor switching capability of 355 kW.

The AC-23A utilisation category is particularly relevant when selecting a switch-disconnector for motor applications. It addresses switching duties involving motors or other highly inductive loads under the applicable standard conditions.

Correct switch selection must consider the actual operating voltage, motor characteristics, load current, switching frequency, fault protection and installation conditions.

The OT400ERRR3TZ is a manual switch-disconnector. It does not automatically trip in response to overloads or short circuits, and suitable protective devices must be included elsewhere in the complete electrical system.

Acid-Resistant Stainless Steel Enclosure for Demanding Environments

A key advantage of the ABB OT400ERRR3TZ is its acid-resistant stainless steel sheet enclosure. This construction provides improved corrosion resistance compared with conventional painted steel in suitably assessed industrial environments.

Stainless steel enclosed safety switches are particularly relevant where equipment may be exposed to moisture, cleaning processes or other conditions that can accelerate corrosion.

Potential applications include food and beverage production, chemical processing, water treatment, pharmaceutical manufacturing and other industrial installations requiring durable enclosure materials.

Actual suitability depends on the specific chemicals, cleaning agents, ambient conditions and exposure levels. Acid-resistant stainless steel should not be interpreted as universally resistant to every corrosive substance.

The enclosure measures 800 mm high × 400 mm wide × 230 mm deep and weighs approximately 32 kg. Appropriate structural support, mounting hardware and handling arrangements should be considered during installation.

IP65 Protection for Industrial Electrical Equipment

The OT400ERRR3TZ has an IP65 enclosure protection rating, indicating protection against dust ingress and water jets when the enclosure is correctly assembled and installed.

This level of protection is useful in industrial environments where electrical equipment may be exposed to dust, moisture or cleaning activities.

However, the complete installation must maintain the required ingress protection. Cable glands, flange covers, unused-entry closures and sealing components must be compatible with the enclosure and correctly fitted.

IP65 does not automatically establish suitability for high-pressure washdown, prolonged immersion or every aggressive cleaning process. The environmental conditions must be assessed against the complete equipment specification.

Stainless Steel Handle and Controlled Maintenance Access

The ABB OT400ERRR3TZ is supplied with a stainless steel operating handle featuring clear I–O / ON–OFF markings.

The external handle provides a visible operating point, allowing authorised personnel to identify and operate the switch without routinely opening the enclosure.

The enclosure includes a hinged cover, locking arrangement and cover interlock. ABB also specifies a defeatable interlock facility for authorised access under the appropriate conditions.

The interlock arrangement supports controlled enclosure access but does not replace safe isolation procedures. Personnel must follow the relevant electrical safety requirements before opening the enclosure or working on connected equipment.

The operating handle and cover arrangement make the OT400ERRR3TZ a practical solution for installations requiring a durable, clearly identifiable local safety switch.

Auxiliary Contacts Included for Control and Indication

The OT400ERRR3TZ includes two normally open and one normally closed auxiliary contacts (2 NO + 1 NC) as standard.

These contacts can support compatible electrical control and status indication functions, such as monitoring the switch position or providing signals to an appropriately designed control system.

For this model, ABB specifies that the auxiliary contacts are wired to terminal blocks, helping simplify the connection of suitable control wiring.

The maximum listed auxiliary contact arrangement is also 2 NO + 1 NC. Additional contacts should not be assumed available without checking ABB's accessory documentation.

Auxiliary contacts must be used within their own electrical ratings and are not substitutes for the main 400 A switching poles.

Top and Bottom Cable Entries for Flexible Installation

The ABB OT400ERRR3TZ is designed with main cable-entry positions at both the top and bottom of the enclosure. This arrangement supports installations where incoming and outgoing high-current cables approach from different directions.

The enclosure provides four ring-flange positions per cable-entry side, together with a 25 mm knockout for control cable entry.

The main cable-entry flanges are not included as standard. ABB specifies the following separately ordered accessories for the relevant enclosure arrangement:

• ABB KOT61007: Compatible cable flange.
• ABB KOT62296: Compatible cable flange option for EMC applications.
• ABB KOT61008: Compatible flange cover.

The correct flange arrangement must be selected according to the cable sizes, installation conditions, EMC requirements and ABB's assembly instructions.

Any unused openings must be closed using suitable components. The completed cable-entry system must preserve the required enclosure protection and mechanical integrity.

EMC-Approved Enclosed Safety Switch

ABB identifies the OT400ERRR3TZ product configuration as EMC approved.

This is relevant to industrial installations where electromagnetic compatibility must be considered, particularly when the switch is used with motor drives or other electrical equipment capable of generating electromagnetic interference.

The EMC performance of the complete installation depends on the selected cable-entry accessories, cable screening, bonding arrangements, earthing and equipment layout.

Where screened cables are used, ABB's compatible EMC flange option should be considered as part of the complete electrical design.

Typical Applications

• Industrial motor isolation: Manual disconnection of appropriately rated high-power three-phase motor circuits.
• Food and beverage production: Electrical isolation in suitably assessed environments requiring corrosion-resistant enclosures.
• Chemical processing facilities: High-current switching where the enclosure material is compatible with the surrounding environment.
• Water and wastewater treatment: Manual isolation of suitable electrical plant and machinery.
• Pharmaceutical manufacturing: Electrical switching in industrial installations requiring durable stainless steel equipment.
• Industrial pumping systems: Local isolation of appropriately rated pump motor supplies.
• Manufacturing machinery: Providing a robust enclosed electrical isolation point.
• Process plant installations: High-current manual switching in demanding industrial environments.
• Industrial ventilation: Electrical isolation of suitable high-power fan and motor circuits.
• Motor drive installations: Integration into appropriately engineered systems with suitable EMC arrangements.
• OEM machinery: Incorporating a stainless steel safety switch into industrial equipment.
• Industrial maintenance: Supporting controlled electrical isolation before servicing machinery.
• Corrosion-sensitive installations: Replacing compatible enclosed switches where stainless steel construction is required.
• Electrical distribution systems: Manual switching of suitable low-voltage three-phase circuits.