Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OTP75T3MX three-pole ATEX Ex II 3D plastic enclosed safety switch-disconnector with IP65 protection, 80 A AC-23A operational current at 400 V AC, threaded metric cable knock-outs and one normally open auxiliary contact for industrial electrical isolation in suitable explosive dust atmospheres.
£257.52
The ABB OTP75T3MX is a 3-pole ATEX plastic enclosed safety switch-disconnector designed for local electrical isolation of industrial machinery, motors and equipment in suitable potentially explosive dust atmospheres. Part of the ABB OTP enclosed safety switch range, it combines manual isolation functionality with an IP65 protective enclosure and an ATEX classification for specified hazardous-area applications.
Featuring ATEX Ex II 3D classification, an IP65-rated plastic enclosure and threaded metric cable knock-outs, the OTP75T3MX is designed for applications requiring an appropriately classified enclosed switching device. Its black operating handle is padlockable, while the enclosure includes a neutral terminal, protective earth terminal and one normally open auxiliary contact.
Identified by ABB manufacturer product ID 1SCA022839R8880 and order code OTP75T3MX, the switch provides an 80 A AC-23A operational current rating at 400 V AC and a 37 kW motor switching capability at 400 V AC. Its three-pole switching arrangement, 70 mm² terminal capacity and 2 × M50 + M16 cable entry configuration per side make it suitable for appropriately designed industrial electrical isolation systems.
The ABB OTP75T3MX provides a local means of disconnecting electrical machinery and equipment from its power supply in installations requiring a suitably classified ATEX switching device. Its Ex II 3D classification identifies it as Category 3 equipment for explosive dust atmospheres, typically associated with Zone 22 applications when the complete installation and environmental conditions satisfy the applicable requirements.
The switch's three-pole arrangement enables simultaneous disconnection of three phase conductors in compatible electrical systems. With an 80 A AC-23A operational current rating at 400 V AC, it is suitable for appropriately rated industrial motor and inductive-load switching applications. The included normally open auxiliary contact can be incorporated into compatible signalling or control circuits.
The IP65 enclosure provides protection against dust ingress and low-pressure water jets when correctly installed. Threaded M50 and M16 cable knock-outs allow suitable cable entry arrangements, although cable glands must be selected separately and must preserve the required environmental protection and hazardous-area suitability.
ATEX equipment selection requires assessment of the hazardous-area zone, dust characteristics, ignition temperature, maximum surface temperature and applicable installation standards. The OTP75T3MX must not be assumed suitable for every explosive atmosphere, particularly gas hazardous areas or dust zones requiring a higher equipment category. Appropriate upstream circuit protection and electrical isolation procedures must also be provided.
Tick the specs you need, then view products that match.
| Device Type | Enclosed safety switch / isolator | |
|---|---|---|
| Material | Plastic |
The ABB OTP75T3MX is a 3-pole ATEX plastic enclosed safety switch-disconnector used for local electrical isolation of industrial motors, machinery and equipment. Its Ex II 3D classification makes it relevant to appropriately assessed potentially explosive dust atmospheres.
The OTP75T3MX is specified as ATEX Ex II 3D, with a maximum specified surface temperature of 60 °C. Category 3D equipment is generally associated with Zone 22 dust atmospheres, but suitability must be confirmed against the hazardous-area classification, dust characteristics and installation requirements.
The OTP75T3MX has an AC-23A operational current rating of 80 A at 400 V AC, with a 37 kW motor switching capability at 400 V AC. Its AC-23A current ratings are 60 A at 500 V AC and 40 A at 690 V AC. Selection depends on the connected load and operating conditions.
The OTP75T3MX provides 2 × M50 + M16 threaded knock-out cable openings per side, with cable entry available from the top and bottom. It has a specified 70 mm² terminal capacity and includes neutral and protective earth terminals. Suitable cable glands must be selected separately.
Yes. The OTP75T3MX includes one normally open auxiliary contact and a black padlockable operating handle. The auxiliary contact can support compatible control or indication circuits, while the handle supports controlled electrical isolation during maintenance.
ABB OTP ATEX enclosed safety switches provide local electrical isolation solutions for industrial machinery and equipment installed in appropriately classified explosive dust environments. With its Ex II 3D classification, 80 A AC-23A rating at 400 V AC, three-pole construction, IP65 enclosure, threaded metric cable entries and included auxiliary contact, the OTP75T3MX is suitable for electrical contractors, machinery manufacturers, industrial maintenance teams and hazardous-area engineering professionals selecting compatible switching equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.