Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OTP63T3MX (1SCA022839R8700) three-pole 63 A ATEX II 3D plastic enclosed safety switch-disconnector with IP65 protection, 30 kW AC-23A motor switching capability at 400 V AC, black padlockable selector handle, one normally open auxiliary contact and metric cable-entry knockouts for suitable industrial dust-hazardous installations.
£143.14
The ABB OTP63T3MX (1SCA022839R8700) is a 3-pole, 63 A ATEX plastic enclosed safety switch-disconnector designed for manual electrical switching and isolation in industrial environments where combustible dust may create an explosive atmosphere. Part of the ABB OTP range, this specialist enclosed switch combines a protective plastic housing, black selector operating handle and metric cable-entry knockouts.
The OTP63T3MX is specified for ATEX equipment category II 3D applications, with an IP65 enclosure and a stated maximum surface temperature of 60 °C. It provides a rated operational current of 63 A under AC-23A conditions at 400 V AC, together with a 30 kW motor switching rating at the same voltage. These characteristics make it suitable for appropriately engineered industrial motor and electrical isolation applications in designated dust-hazardous environments.
The switch is housed in a grey polycarbonate plastic enclosure measuring 200 × 145 × 90 mm. It features a black, padlockable selector handle, one included normally open auxiliary contact, neutral and protective earth connections, and 2 × M32 + M16 metric cable-entry knockouts per side. The enclosure and switching assembly provide a practical solution for industrial installations requiring both electrical isolation and suitable equipment selection for ATEX-designated dust areas.
The ABB OTP63T3MX is designed for industrial installations where electrical equipment must be selected with consideration for potentially explosive dust atmospheres. Its ATEX II 3D designation identifies equipment intended for relevant Group II dust applications, subject to the installation's hazardous-area classification and the exact conditions specified by the manufacturer.
ATEX equipment category 3D is generally associated with Zone 22 combustible-dust environments. However, the suitability of the OTP63T3MX must be confirmed against the actual dust properties, ignition temperature, ambient conditions, equipment marking and installation requirements. The II 3D designation must not be interpreted as approval for every hazardous atmosphere or for gas-hazardous zones.
The OTP63T3MX has a specified maximum surface temperature of 60 °C under the applicable conditions. This is particularly relevant in dust-hazardous environments, where the maximum temperature of exposed equipment surfaces must be assessed against the ignition characteristics of the combustible dust present.
For electrical switching duties, the OTP63T3MX provides a 63 A AC-23A operational current rating at 400 V AC and a corresponding 30 kW motor switching rating. At 500 V AC, its AC-23A operational current rating is 50 A, while at 690 V AC it is 35 A. These ratings allow the switch to be selected according to the supply voltage and switching duty.
The three-pole switching mechanism enables simultaneous manual disconnection of three main conductors through a single external selector handle. The black operating handle provides clear ON/OFF indication and can be padlocked to support controlled maintenance isolation procedures.
The grey IP65 polycarbonate enclosure protects the switching mechanism against dust ingress and water jets when correctly installed. Its top and bottom metric cable-entry knockouts allow suitable cable glands to be selected for the installation. In hazardous areas, the glands, unused-entry closures and complete cable-entry arrangement must also satisfy the applicable protection requirements.
The OTP63T3MX includes one normally open auxiliary contact for compatible control or indication circuits. A neutral terminal and protective earth connection are also provided. Any additional auxiliary components must be compatible with the switch and appropriate for the complete hazardous-area installation.
Although described as a safety switch, the OTP63T3MX is a manual switch-disconnector, not an automatic circuit breaker or motor overload relay. It does not independently provide automatic overload or short-circuit tripping. Suitable protective devices must be incorporated into the electrical installation.
Important ATEX selection note: The OTP63T3MX should only be installed in a hazardous area after confirming its complete ATEX marking, certification documentation, installation instructions and suitability for the site's zone classification and combustible-dust conditions. Installation and maintenance should be performed by personnel competent in hazardous-area electrical systems.
Tick the specs you need, then view products that match.
| Device Type | Enclosed safety switch / isolator | |
|---|---|---|
| Voltage | 750 V AC | |
| Material | Polycarbonate |
The ABB OTP63T3MX is a three-pole, 63 A ATEX enclosed switch-disconnector designed for manual electrical switching and isolation in industrial installations, including suitably assessed combustible-dust hazardous areas. It features an IP65 plastic enclosure and a black selector operating handle.
The OTP63T3MX is identified as ATEX equipment category II 3D. This designation is associated with equipment intended for relevant Group II combustible-dust environments, subject to the manufacturer's complete marking and installation conditions.
The OTP63T3MX has an ATEX II 3D designation, which is generally associated with Zone 22 dust-hazardous areas. Installation suitability must be confirmed against the site's hazardous-area classification, combustible-dust properties and the manufacturer's complete ATEX documentation.
The published designation for the OTP63T3MX is ATEX II 3D, which relates to dust applications. This designation alone does not establish suitability for explosive gas atmospheres or gas-hazardous zones.
The OTP63T3MX has an AC-23A operational current rating of 63 A at 400 V AC, 50 A at 500 V AC and 35 A at 690 V AC. Its conventional thermal current when fully enclosed is 80 A.
The OTP63T3MX has an AC-23A motor switching rating of 30 kW at 400 V, 500 V and 690 V AC. At 230 V AC, the corresponding rated motor switching power is 18.5 kW.
The OTP63T3MX has an IP65-rated plastic enclosure, providing protection against dust ingress and water jets when correctly installed. Cable glands and unused-entry closures must be suitable for the required enclosure protection and hazardous-area conditions.
ABB's ATEX enclosed switch documentation specifies a maximum surface temperature of 60 °C for the OTP63T3MX range under the applicable conditions. Suitability must be checked against the ignition characteristics of the combustible dust present.
The OTP63T3MX features a black selector-type rotary operating handle with clear ON/OFF indication. The protective enclosure is grey polycarbonate plastic.
Yes. The OTP63T3MX has a padlockable operating handle that supports controlled electrical isolation and maintenance lockout procedures when used in accordance with the applicable safety requirements.
Yes. The OTP63T3MX is supplied with one normally open auxiliary contact. Compatible accessories may allow a maximum auxiliary contact configuration of 2 normally open and 2 normally closed contacts, subject to the manufacturer's installation requirements.
The OTP63T3MX provides 2 × M32 + M16 metric cable-entry knockouts per side, with entries at the top and bottom of the enclosure. Suitable cable glands must be ordered separately and selected for the installation environment.
The OTP63T3MX enclosure measures 200 mm high × 145 mm wide × 90 mm deep. Its approximate net weight is 1.0 kg.
No. The OTP63T3MX is a manually operated switch-disconnector and does not independently provide automatic overload or short-circuit tripping. Appropriate protective devices must be selected separately for the complete electrical installation.
OTP63T3MX is the ABB product model and order code, while 1SCA022839R8700 is the corresponding manufacturer identification number. Both refer to the same three-pole, 63 A ATEX plastic enclosed safety switch with IP65 protection.
ABB OTP ATEX enclosed switch-disconnectors provide dependable manual electrical switching and isolation for appropriately engineered industrial installations. The OTP63T3MX combines three-pole operation, a 63 A AC-23A rating at 400 V AC, ATEX II 3D designation, IP65 polycarbonate enclosure, black padlockable selector handle and metric cable-entry knockouts in a practical assembly for electrical engineers, machine builders, industrial maintenance teams and hazardous-area installation specialists.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.