Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OT630KLUU4BZ (1SCA022830R4490) 630 A frame, four-pole steel enclosed switch-disconnector with a published 570 A operational current rating, IP65 protection, black padlockable pistol-grip handle, cover interlock, neutral and protective earth terminals, and blank top and bottom cable entries. Enclosure dimensions 1000 × 400 × 230 mm.
£2,464.45
The ABB OT630KLUU4BZ (1SCA022830R4490) is a heavy-duty 630 A frame, 4-pole steel enclosed switch-disconnector designed for reliable manual switching and electrical isolation in industrial and commercial low-voltage power distribution systems. Part of ABB's established OT enclosed load-break switch range, it combines a robust steel enclosure, IP65 ingress protection and a black pistol-grip operating handle.
The OT630KLUU4BZ is identified within ABB's 630 A enclosed switch-disconnector range. Its published operational switching ratings are 570 A under AC-22A and AC-23A conditions at specified voltages. This distinction is important when selecting the product: the 630 A model designation must not be confused with the applicable 570 A operational rating of the complete enclosed assembly.
The switch features a four-pole switching mechanism, allowing four main conductors to be manually operated together. This makes it suitable for appropriately engineered three-phase electrical systems where the installation requires four-conductor switching.
Supplied in a sheet-steel enclosure with IP65 protection, the OT630KLUU4BZ includes a black pistol-grip handle with clear I–O / ON–OFF indication, neutral and protective earth terminals, and blank cable-entry arrangements at the top and bottom.
With an enclosure measuring 1000 mm high × 400 mm wide × 230 mm deep and an approximate unit weight of 31 kg, the ABB OT630KLUU4BZ is designed for substantial electrical installations where high-current isolation, mechanical durability and reliable manual operation are essential.
The ABB OT630KLUU4BZ belongs to ABB's 630 A frame range of enclosed switch-disconnectors. However, ABB's published technical information identifies a 570 A rated operational current for this specific enclosed assembly under the listed AC-22A and AC-23A utilisation categories.
This distinction is important when selecting the switch for a particular electrical installation. The nominal frame size and the operational switching rating are different characteristics.
The 570 A AC-22A rating applies to suitable mixed resistive and inductive loads under the specified voltage conditions.
The 570 A AC-23A rating applies to appropriate motor and highly inductive switching duties at the listed operating voltages.
Electrical engineers must therefore evaluate the actual load current, operating voltage, utilisation category, installation temperature, conductor arrangement and protective device coordination rather than relying on the 630 A model designation alone.
The OT630KLUU4BZ should not be selected for a continuous or switching duty above its applicable published ratings without confirmation from ABB.
The four-pole configuration of the OT630KLUU4BZ enables four main conductors to be switched together through one mechanical operating mechanism.
In appropriately designed three-phase systems, this may allow switching of the three phase conductors and a neutral conductor.
Four-pole switching can be important in installations where the electrical design requires disconnection of the neutral conductor alongside the phase conductors.
The correct neutral-switching arrangement must always be determined by the electrical system design, earthing configuration and applicable regulations.
The protective earth conductor must remain continuous and must not be interrupted by the switch-disconnector.
The OT630KLUU4BZ is an ON/OFF switch-disconnector, not a source-changeover switch. It does not provide the I–O–II operating positions used to select between two independent incoming supplies.
ABB specifies a maximum AC-23A motor switching capability of 315 kW at 415 V AC for the OT630KLUU4BZ.
At 690 V AC, the corresponding published motor switching capability is 560 kW.
These values make the switch relevant to substantial industrial motor installations, provided the motor characteristics and switching duties are compatible with the product ratings.
The AC-23A utilisation category addresses switching duties involving motors or other highly inductive loads. It is therefore a more relevant selection characteristic for many motor applications than a general-purpose current rating alone.
Motor starting current, operating conditions, switching frequency and protective device coordination must be considered when designing the complete installation.
The OT630KLUU4BZ is not a motor overload relay or automatic motor protection circuit breaker. Suitable motor protection must be provided separately.
The ABB OT630KLUU4BZ is supplied in a substantial sheet-steel enclosure designed for industrial electrical applications.
The enclosure provides mechanical protection for the internal switching mechanism and conductor connections.
Its IP65 ingress protection rating indicates protection against dust ingress and water jets when the complete assembly is correctly installed.
This protection rating is useful in many industrial environments where dust and moisture exposure must be considered.
However, IP65 does not automatically establish suitability for outdoor exposure, immersion, high-pressure cleaning or every corrosive environment. The complete installation must be assessed against the environmental conditions and ABB's instructions.
The enclosure measures 1000 mm high × 400 mm wide × 230 mm deep and has an approximate unit weight of 31 kg.
Suitable structural support, mounting hardware and installation clearances are required to accommodate the enclosure and its high-current cable connections.
The OT630KLUU4BZ features a black pistol-grip operating handle with clear I–O / ON–OFF position indication.
This provides an externally accessible manual switching point without requiring routine access to the internal switch-disconnector mechanism.
The handle can accommodate up to three padlocks, supporting controlled electrical isolation procedures.
Padlocking can help prevent unauthorised operation while maintenance or servicing work is being carried out.
The switch must be incorporated into a complete safe isolation procedure, including appropriate locking arrangements and verification that the electrical circuit is de-energised before work begins.
The ABB OT630KLUU4BZ includes a cover interlock designed to support controlled access to the enclosure.
ABB also specifies a defeatable interlock function, allowing authorised personnel to bypass the interlock where permitted by the applicable maintenance procedures.
This may be relevant to inspection or diagnostic activities requiring controlled access to the enclosure.
The interlock arrangement does not replace electrical safety procedures. Access to internal components must only be undertaken by competent personnel following the applicable isolation and risk-control requirements.
The ABB OT630KLUU4BZ is supplied with blank cable-entry arrangements at the top and bottom of the steel enclosure.
These blank entry areas allow the installation to be configured for the required power cable sizes and routing arrangements.
ABB specifies that suitable compression glands or cable-entry flanges must be selected separately.
The blank cable-entry components also form part of the enclosure fixing arrangement specified for this product family.
Installers must therefore follow ABB's instructions when selecting and fitting the cable-entry components.
The completed installation must maintain the required mechanical integrity, earthing continuity and IP65 protection.
The OT630KLUU4BZ includes neutral and protective earth terminals as part of the enclosed assembly.
These terminals support suitable electrical connection arrangements within the enclosure.
The presence of a neutral terminal must not be confused with the four main switching poles. The precise neutral connection arrangement must be checked against ABB's wiring and installation documentation.
Protective earth connections must be installed and maintained in accordance with the applicable electrical regulations.
The OT630KLUU4BZ is supplied with no auxiliary contacts fitted as standard.
Where switch-position indication or control signalling is required, compatible ABB auxiliary contact accessories may be selected.
ABB's current catalogue identifies a maximum auxiliary contact arrangement of 2 NO + 1 NC for the relevant enclosed switch configuration. Accessory compatibility should be confirmed for the exact product before ordering.
Auxiliary contacts are intended for suitable control and indication circuits and must not be used as substitutes for the main power switching poles.
The ABB OT630KLUU4BZ is a manually operated switch-disconnector.
It provides a mechanical means of switching and isolating appropriately rated electrical circuits.
It does not independently provide automatic overload tripping or short-circuit protection.
Suitable protective devices must therefore be incorporated into the complete electrical installation.
Engineers must verify the prospective fault current, conductor ratings, switching duty and protective device coordination before energising the system.
Tick the specs you need, then view products that match.
| Device Type | Enclosed switch disconnector | |
|---|---|---|
| Voltage | 1000 V AC | |
| Material | Steel |
The ABB OT630KLUU4BZ is a 630 A frame, four-pole steel enclosed switch-disconnector used for manual electrical switching and isolation in industrial and commercial low-voltage installations. Its published operational current rating is 570 A under the specified AC-22A and AC-23A conditions.
The OT630KLUU4BZ belongs to ABB's 630 A frame range, but ABB publishes a 570 A rated operational current for this specific enclosed assembly under the listed AC-22A and AC-23A conditions. The applicable operational rating must be used when selecting the switch.
The OT630KLUU4BZ has four main switching poles, operated together through a single manual switching mechanism.
The OT630KLUU4BZ has an IP65 steel enclosure rating, providing protection against dust ingress and water jets when correctly installed with suitable cable-entry accessories and seals.
The OT630KLUU4BZ is supplied in a robust sheet-steel enclosure designed for industrial electrical switching applications.
The OT630KLUU4BZ features a black pistol-grip operating handle with I–O and ON–OFF position indication.
Yes. The OT630KLUU4BZ has a padlockable operating handle designed to accommodate up to three padlocks, supporting controlled maintenance isolation procedures.
Yes. The OT630KLUU4BZ includes a cover interlock and a defeatable interlock function for authorised access under appropriate procedures.
The OT630KLUU4BZ has blank cable-entry arrangements at the top and bottom of the enclosure. Suitable compression glands or cable-entry flanges must be selected separately.
Suitable compression glands and cable-entry flanges must be ordered separately. The completed cable-entry arrangement must follow ABB's installation instructions and maintain the required enclosure protection.
Yes. The OT630KLUU4BZ includes neutral and protective earth terminals for suitable electrical connection arrangements.
No auxiliary contacts are fitted as standard. Compatible ABB auxiliary contact accessories may be selected separately where control or status indication is required.
ABB specifies a maximum AC-23A motor switching power of 315 kW at 415 V AC and 560 kW at 690 V AC. Actual suitability depends on the motor characteristics, operating conditions and complete electrical installation.
The OT630KLUU4BZ enclosure measures 1000 mm high × 400 mm wide × 230 mm deep. Its approximate unit weight is 31 kg.
No. The OT630KLUU4BZ is an ON/OFF switch-disconnector. It does not provide the I–O–II positions required for manual selection between two independent electrical supplies.
No. The OT630KLUU4BZ is a manually operated switch-disconnector rather than an automatic circuit breaker. Suitable overload and short-circuit protective devices must be provided separately.
The ABB manufacturer part number is 1SCA022830R4490. The ABB order code is OT630KLUU4BZ, and the product belongs to ABB product group 311019 – Metal Enclosed (Loadbreak).
The ABB OT630KLUU4BZ combines a 630 A frame designation, published 570 A operational switching ratings, four-pole manual isolation, a robust IP65 steel enclosure and a black padlockable pistol-grip handle. Its substantial construction and flexible cable-entry arrangement make it a practical solution for electrical contractors, industrial maintenance teams, panel builders and power distribution engineers requiring dependable high-current switching and isolation.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.