Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OTP75A6M (1SCA022812R3940) six-pole IP65 plastic enclosed safety switch with a 37 kW AC-23A motor switching rating at 415 V AC, 80 A operational current rating, red/yellow padlockable handle and one included normally open auxiliary contact for industrial machinery isolation.
£434.11
The ABB OTP75A6M, manufacturer order number 1SCA022812R3940, is a heavy-duty six-pole plastic enclosed safety switch designed for dependable manual switching and electrical isolation in industrial and commercial installations. Part of the ABB OTP enclosed safety switch range, it combines a six-pole switch disconnector, an IP65 protective enclosure and a distinctive red/yellow operating handle in a complete assembly suitable for installation close to machinery and electrical equipment.
With a 37 kW AC-23A motor switching rating at 415 V AC and a rated operational current of 80 A at 415 V AC under AC-23A conditions, the OTP75A6M is designed for demanding motor isolation duties. Its six-pole configuration enables six conductors to be switched together, making it useful for installations requiring more switched poles than a conventional three-pole isolator. The switch is also specified for 37 kW motor switching at 690 V AC, subject to the corresponding electrical ratings and installation requirements.
The OTP75A6M features a red/yellow pistol-type operating handle, a cover interlock, a padlockable OFF position and an included 1 NO auxiliary contact. Its rigid, glass-fibre-reinforced polycarbonate enclosure provides IP65 protection and incorporates threaded metric cable-entry knockouts for power and control cables. Fixed neutral and protective earth terminals are also included, making this ABB enclosed switch a practical choice for industrial machinery, maintenance isolation and equipment installations.
The ABB OTP75A6M is designed for local electrical isolation of industrial machinery and equipment. Its six-pole switching mechanism allows six conductors to be disconnected through a single operating handle. This provides flexibility for applications involving multiple three-phase circuits or other engineered switching arrangements where a conventional three-pole switch would not provide sufficient switched poles.
The switch's 37 kW AC-23A motor switching rating at 415 V AC makes it suitable for appropriately rated motor installations. ABB also specifies 37 kW AC-23A motor switching capability at 500 V and 690 V AC. AC-23A is a utilisation category covering motor loads and other highly inductive switching duties, so selection should always consider the connected equipment's operating voltage, load current and switching requirements.
The red/yellow pistol-type handle is clearly identifiable as a machinery isolation control and operates the switch from outside the enclosure. The handle can be secured in the OFF position using up to three padlocks, supporting maintenance isolation and lockout procedures. The enclosure cover is interlocked with the switch mechanism, while a defeatable interlock allows authorised personnel to access the enclosure when permitted by the manufacturer's instructions and applicable electrical safety procedures.
The IP65 plastic enclosure is manufactured from rigid, glass-fibre-reinforced polycarbonate and incorporates UV protection. This construction is suitable for industrial environments where dust, moisture and outdoor exposure must be considered. Top and bottom cable-entry arrangements provide two M50 threaded knockouts and one M16 knockout per side, accommodating appropriately selected power and control cable glands. Suitable compression glands must be purchased separately and correctly fitted to maintain the enclosure's ingress protection.
Unlike some basic enclosed switch disconnectors, the OTP75A6M is supplied with one normally open auxiliary contact. This can be used as part of an appropriately designed indication or control circuit, while the product also supports selected additional auxiliary contact configurations. Fixed neutral and protective earth terminals are included. The OTP75A6M is a manual switch disconnector rather than an automatic overcurrent protective device; suitable fuses, circuit breakers and other protective equipment must therefore be provided as required by the electrical installation.
Tick the specs you need, then view products that match.
| Device Type | Enclosed safety switch / isolator | |
|---|---|---|
| Material | Polycarbonate |
The ABB OTP75A6M is a six-pole plastic enclosed safety switch used for manual switching and electrical isolation of industrial machinery, motor circuits and other electrical equipment. Its red/yellow operating handle and IP65 enclosure make it suitable for local machinery isolation installations.
The ABB manufacturer order number is 1SCA022812R3940, and the model designation is OTP75A6M. It belongs to ABB product group 311004 – Plastic Enclosed Switches (OTP).
The OTP75A6M has six switched poles. These allow six conductors to be disconnected together using a single operating handle, subject to the requirements of the electrical installation.
The OTP75A6M has a 37 kW AC-23A motor switching rating at 415 V AC. ABB also specifies a maximum motor output of 37 kW at 500 V and 690 V AC under AC-23A conditions.
The OTP75A6M has a rated operational current of 80 A at 415 V AC under AC-23A conditions. The appropriate current rating for an installation must be selected according to the operating voltage and utilisation category.
The OTP75A6M has an IP65-rated plastic enclosure, providing protection against dust ingress and water jets when correctly installed. Suitable cable glands and sealing arrangements are required to maintain this protection.
Yes. The OTP75A6M has a red/yellow operating handle that can accommodate up to three padlocks in the OFF position. This supports controlled electrical isolation during machinery maintenance and servicing.
Yes. The OTP75A6M is supplied with one normally open (1 NO) auxiliary contact. The maximum supported auxiliary contact configuration is 2 NO + 2 NC, subject to the selection of compatible accessories.
The OTP75A6M provides two M50 threaded knockouts and one M16 threaded knockout at both the top and bottom of the enclosure. Suitable compression cable glands must be selected separately.
Yes. The OTP75A6M includes fixed neutral and protective earth terminals for associated conductor connections. These terminals are separate from the six switched poles.
ABB OTP enclosed safety switches provide dependable manual switching and isolation for industrial electrical equipment. With its six-pole configuration, 37 kW AC-23A motor switching capability at 415 V AC, IP65 polycarbonate enclosure, red/yellow padlockable handle and included auxiliary contact, the OTP75A6M is a practical choice for machine builders, electrical contractors, panel manufacturers and industrial maintenance engineers.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.