Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SCA022812R3430 ABB 37 kW 3-Pole IP65 Plastic Enclosed Safety Switch Red/Yellow Handle
ABB OTP75A3M three-pole plastic enclosed safety switch-disconnector with a 37 kW motor switching specification, IP65 enclosure protection and red and yellow operating handle for local isolation of industrial machinery and electrical equipment.
£213.54
Why Choose the ABB OTP75A3M 37 kW 3-Pole IP65 Enclosed Safety Switch?
The ABB OTP75A3M is a 3-pole plastic enclosed safety switch designed for local electrical isolation and switching of industrial motors, machinery and electrical equipment. Part of the ABB OTP enclosed switch-disconnector range, it combines a manually operated switching mechanism with a protective enclosure and a clearly identifiable red and yellow operating handle.
Featuring a 37 kW motor switching specification and an IP65-rated plastic enclosure, the OTP75A3M provides a practical solution for industrial installations requiring local isolation of three-phase equipment. Its three-pole configuration allows the phase conductors of a compatible three-phase supply to be disconnected together, while the red and yellow handle provides clear visual identification of the isolation control.
Identified by ABB manufacturer product ID 1SCA022812R3430 and order code OTP75A3M, this enclosed switch is suitable for industrial motor control, machinery maintenance and electrical distribution applications. Its enclosed construction helps protect the switching components against environmental exposure, while its manual operation provides a dedicated means of disconnecting equipment from the electrical supply.
Key Advantages
- 37 kW motor switching specification for compatible industrial applications.
- 3-pole switching configuration suitable for three-phase electrical equipment.
- IP65-rated plastic enclosure provides protection against dust and low-pressure water jets.
- Red and yellow operating handle provides clear identification of the switching control.
- Manual switching enables local electrical isolation of connected equipment.
- Enclosed construction helps protect internal switching components.
- Suitable for industrial motors, pumps, fans and machinery.
- Supports planned maintenance and servicing isolation procedures.
- Provides a practical switching point close to industrial equipment.
- Suitable for integration into compatible motor control and electrical distribution systems.
- Part of the established ABB OTP enclosed switch-disconnector family.
- Clearly identified by its ABB manufacturer product ID for accurate procurement and replacement.
Key Features
- ABB OTP75A3M plastic enclosed safety switch.
- 37 kW motor switching specification.
- 3-pole main switching arrangement.
- IP65 enclosure protection rating.
- Red and yellow operating handle.
- Manually operated switch-disconnector mechanism.
- Enclosed design for local electrical isolation.
- Suitable for compatible three-phase electrical installations.
- Designed for industrial machinery and motor isolation applications.
- Protective plastic enclosure for the switching assembly.
- Suitable for incorporation into low-voltage electrical installations.
- ABB OTP enclosed switch range.
- ABB order code: OTP75A3M.
- ABB manufacturer product ID: 1SCA022812R3430.
Technical Specifications
- Manufacturer: ABB
- Series: OTP Plastic Enclosed Switches
- Model: OTP75A3M
- ABB order code: OTP75A3M
- ABB manufacturer product ID: 1SCA022812R3430
- Product group: 311004 – Plastic Enclosed Switches (OTP)
- Product type: Plastic enclosed safety switch-disconnector
- Specified motor power: 37 kW
- Number of poles: 3
- Switching configuration: Three-pole
- Enclosure protection rating: IP65
- Enclosure material: Plastic
- Operating handle colour: Red / Yellow
- Switching operation: Manual
- Primary function: Electrical isolation and switching
- Product family: ABB OTP enclosed switch-disconnectors
- Typical equipment: Industrial motors and machinery
Reliable Local Isolation for Industrial Motors and Machinery
The ABB OTP75A3M provides a local means of disconnecting industrial equipment from its electrical supply. Enclosed switch-disconnectors are commonly installed near machinery to allow operators and maintenance personnel to establish an isolation point before inspection, servicing or repair.
Its three-pole switching arrangement is suited to compatible three-phase electrical systems. The 37 kW motor switching specification makes the OTP75A3M relevant to industrial motor applications, although the final selection must account for the operating voltage, motor full-load current, starting characteristics and applicable utilisation category.
The IP65 plastic enclosure provides protection against dust ingress and low-pressure water jets when correctly installed. The red and yellow operating handle helps distinguish the isolation control from surrounding equipment, supporting clear identification within machinery and electrical installations.
When integrating the OTP75A3M into an electrical system, the installer should verify the manufacturer's operational ratings, terminal requirements and switching arrangement. Suitable upstream short-circuit and overcurrent protection must also be provided. The switch-disconnector should not be treated as a substitute for a motor overload protective device or an automatically compliant emergency-stop system.
Typical Applications
- Local isolation of three-phase industrial motors.
- Industrial machinery electrical isolation.
- Pumps and pumping systems.
- Industrial ventilation and extraction fans.
- Conveyor and material handling equipment.
- Manufacturing and production machinery.
- Packaging and processing equipment.
- Industrial motor control installations.
- Electrical distribution and local switching points.
- Industrial maintenance and servicing isolation arrangements.
- OEM machinery and automation equipment.
- Installations requiring an IP65 enclosed switching device.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Enclosed safety switch / isolator | |
|---|---|---|
| Material | Plastic |
Frequently Asked Questions
What is the ABB OTP75A3M used for?
The ABB OTP75A3M is a 3-pole plastic enclosed safety switch-disconnector used for local electrical isolation and switching of compatible industrial motors, machinery and electrical equipment. It provides a manually operated disconnection point for maintenance and servicing applications.
What motor power is specified for the ABB OTP75A3M?
The OTP75A3M is specified with a 37 kW motor switching capability. Its suitability for a particular motor depends on the operating voltage, full-load current, starting characteristics and applicable utilisation category, which should be checked against ABB's technical documentation.
What IP protection rating does the ABB OTP75A3M have?
The OTP75A3M features an IP65-rated plastic enclosure. When correctly installed, this provides protection against dust ingress and low-pressure water jets, making it suitable for industrial environments requiring enclosed electrical switching equipment.
How many poles does the ABB OTP75A3M have, and what colour is its handle?
The OTP75A3M has three switching poles and is supplied with a red and yellow operating handle. The three-pole arrangement is intended for compatible three-phase electrical installations, while the handle provides clear identification of the manual switching control.
What is the ABB manufacturer product ID for the OTP75A3M?
The ABB manufacturer product ID is 1SCA022812R3430, and the order code is OTP75A3M. These identifiers can be used to specify the correct enclosed switch-disconnector when ordering or replacing equipment.
Trusted by Industrial Electrical and Machinery Professionals
ABB OTP plastic enclosed switch-disconnectors provide practical local isolation solutions for industrial machinery, motor control systems and low-voltage electrical installations. With its 37 kW motor switching specification, three-pole construction, IP65 enclosure and red and yellow operating handle, the OTP75A3M is a suitable choice for electrical contractors, industrial maintenance teams, machinery manufacturers and control panel builders selecting compatible enclosed switching equipment.
