Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OTP75T4M (1SCA022812R3010) is a 37 kW four-pole enclosed switch disconnector with an 80 A AC-23A rating at 415 V AC, IP65 UV-protected plastic enclosure, black padlockable handle, metric threaded cable knockouts and one included normally open auxiliary contact for industrial machinery isolation.
£269.83
The ABB OTP75T4M (ABB product ID 1SCA022812R3010) is a robust 4-pole, 37 kW enclosed switch disconnector designed for reliable manual isolation and load switching in industrial and commercial low-voltage electrical installations. Part of the ABB OTP plastic enclosed safety switch range, it combines a durable grey enclosure, black operating handle, metric threaded cable entry knockouts and IP65 ingress protection in a complete industrial switching assembly.
Designed for demanding electrical applications, the OTP75T4M provides an 80 A AC-23A operational current rating at 415 V AC and a 37 kW AC-23A operational power rating at 415 V AC. Its four-pole construction enables simultaneous disconnection of four conductors, making it suitable for three-phase installations requiring switched-neutral isolation or other compatible four-pole switching arrangements.
The switch is housed in a UV-protected glass-reinforced polycarbonate enclosure measuring 400 × 200 × 140 mm (height × width × depth). It features top and bottom metric threaded knockouts, a padlockable black operating handle, an interlocked enclosure cover, protective earth terminals and a fixed neutral terminal. With one normally open auxiliary contact included, the ABB OTP75T4M provides a practical solution for industrial machinery isolation, electrical distribution and maintenance switching applications.
The ABB OTP75T4M provides a dependable method of manually disconnecting industrial electrical equipment from its power supply. Its four mechanically linked main poles open together when the operating handle is moved to the OFF position, allowing simultaneous isolation of four conductors. This makes the switch suitable for three-phase installations requiring a switched neutral or other compatible four-pole isolation arrangements.
The switch is designed for AC-23A motor-load switching duties within its rated electrical limits. At 415 V AC, it provides an 80 A operational current rating and a 37 kW operational power rating. These ratings make it suitable for industrial machinery, motors, fans, pumps and other equipment requiring a dedicated local disconnecting point. Actual suitability depends on the supply voltage, motor characteristics, operating duty and protection arrangements.
The IP65 glass-reinforced polycarbonate enclosure provides robust environmental protection against dust and water jets when correctly installed. Its UV-protected construction supports use in industrial environments where exposure to sunlight and moisture may occur. The grey enclosure is suitable for installation near machinery, on walls or within appropriately designed industrial electrical installations.
A distinguishing feature of the OTP75T4M is its metric threaded cable entry arrangement. The enclosure provides two M50 power cable entry provisions and one M16 control cable entry provision at both the top and bottom. This arrangement supports flexible routing of larger power cables and smaller auxiliary control wiring. Suitable compression glands must be selected and installed separately to maintain the enclosure's IP65 rating.
The black padlockable operating handle supports safe maintenance practices by allowing the switch to be secured in the OFF position. The enclosure cover is interlocked with the switching mechanism, restricting normal access while the switch is ON. A defeatable interlock facility is provided for authorised personnel following appropriate electrical safety procedures.
The OTP75T4M is supplied with one normally open auxiliary contact, enabling basic switch-position signalling to a compatible control circuit or monitoring system. Additional compatible auxiliary contacts may be fitted within the manufacturer's specified configuration limits. Fixed neutral and protective earth terminals are also provided for electrical installation convenience.
As a switch disconnector, the OTP75T4M provides manual switching and electrical isolation rather than automatic overload or short-circuit protection. Appropriate protective devices must therefore be selected and installed separately according to the electrical installation requirements.
Tick the specs you need, then view products that match.
| Device Type | Enclosed safety switch / isolator | |
|---|---|---|
| Voltage | 750 V AC | |
| Material | Polycarbonate |
The ABB OTP75T4M is a four-pole enclosed switch disconnector used for manual switching and electrical isolation of industrial motors, machinery and low-voltage electrical equipment. It is particularly suitable for applications requiring simultaneous isolation of four conductors.
The OTP75T4M has an AC-23A operational power rating of 37 kW at 415 V AC. Its operational power rating is also 37 kW at 500 V AC and 690 V AC, subject to the corresponding current ratings and operating conditions.
The OTP75T4M has an 80 A AC-23A operational current rating at 415 V AC and a 115 A rated continuous current. The correct rating depends on the load characteristics and utilisation category.
The switch has 4 mechanically linked switching poles, allowing simultaneous disconnection of four electrical conductors. This makes it suitable for compatible three-phase systems requiring switched-neutral isolation.
The OTP75T4M has an IP65 ingress protection rating according to IEC 60529. When correctly installed with suitable cable glands and enclosure sealing, it provides protection against dust and water jets.
The enclosure is manufactured from UV-protected glass-reinforced polycarbonate. This provides a durable, corrosion-resistant housing suitable for industrial electrical installations.
The OTP75T4M is supplied with a black manual operating handle featuring I-O / ON-OFF indication. The handle can be padlocked in the OFF position to support controlled maintenance isolation.
Yes. The OTP75T4M has a padlockable operating handle designed to accommodate up to three padlocks. This supports electrical isolation and maintenance safety procedures.
The enclosure provides 2 × M50 + M16 metric threaded cable entry knockouts at both the top and bottom. Suitable compression glands must be ordered separately and installed correctly to maintain IP65 protection.
Yes. The OTP75T4M is supplied with one normally open auxiliary contact. Compatible additional auxiliary contacts may be installed, with a maximum configuration of 2 NO + 2 NC.
Yes. The switch is supplied with a fixed neutral terminal and protective earth terminals, supporting electrical installation and termination of compatible circuits.
The enclosure measures 400 mm high × 200 mm wide × 140 mm deep and has a net weight of approximately 2.5 kg.
Yes. The OTP75T4M features a UV-protected, IP65-rated plastic enclosure suitable for indoor and appropriately installed outdoor applications. Correct cable glands, mounting and sealing are necessary to maintain the specified environmental protection.
No. The OTP75T4M is a switch disconnector designed for manual switching and electrical isolation. Suitable protective devices must be installed separately to provide overload and short-circuit protection where required.
The ABB OTP75T4M is designed in accordance with IEC 60947-1 and IEC 60947-3, with enclosure ingress protection classified according to IEC 60529.
ABB OTP enclosed switch disconnectors provide dependable manual isolation for industrial machinery and low-voltage electrical installations. With its four-pole switching arrangement, 37 kW AC-23A motor-load rating, IP65 glass-reinforced plastic enclosure, black padlockable handle, metric threaded cable entries and included auxiliary contact, the OTP75T4M offers a practical solution for machine builders, electrical contractors, maintenance engineers and industrial control panel manufacturers requiring robust electrical isolation.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.