Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OTP63A3M three-pole GRP enclosed switch-disconnector rated 63 A at 415 V AC under AC-23 utilisation conditions, featuring 70 mm² terminal capacity and a fixed neutral terminal for industrial machinery and motor isolation.
£117.04
The ABB OTP63A3M is a heavy-duty 63 A three-pole enclosed switch-disconnector designed for reliable electrical switching and isolation in industrial and commercial low-voltage installations. Part of the ABB OTP enclosed switch range, it combines a robust switching mechanism with a glass-reinforced plastic enclosure for installation near motors, machinery and electrical distribution equipment.
Rated at 63 A at 415 V AC under utilisation category AC-23, the OTP63A3M is suitable for appropriately rated motor and other inductive-load switching applications. Its three-pole construction enables simultaneous switching of the three phase conductors, providing a practical means of isolating equipment during maintenance and servicing.
The OTP63A3M features 70 mm² terminal capacity and a fixed neutral terminal, supporting straightforward connection within industrial electrical systems. Its enclosed construction and metric cable-entry arrangement make it a practical solution for panel builders, electrical contractors and industrial maintenance teams requiring dependable local isolation.
The ABB OTP63A3M provides a dedicated switching and isolation point for industrial equipment. Its three-pole mechanism allows the three phase conductors of a suitable electrical circuit to be disconnected together, helping maintenance personnel isolate machinery before inspection, repair or servicing.
The specified 63 A AC-23 rating at 415 V AC is particularly relevant to switching applications involving motor loads or other highly inductive circuits. AC-23 utilisation is distinct from simpler resistive-load categories, so the switch should be selected according to the connected equipment's electrical characteristics and operating duty.
The 70 mm² terminal capacity provides flexibility when connecting suitably sized conductors, while the fixed neutral terminal supports installations requiring a neutral termination point. The neutral terminal is separate from the three main switched poles and should not be assumed to provide switched-neutral isolation.
The GRP enclosure provides a robust protective housing for the switch-disconnector assembly. Appropriate cable glands, wiring practices and installation procedures should be used to maintain the enclosure's intended protection and the electrical safety of the completed installation.
Tick the specs you need, then view products that match.
| Device Type | Enclosed switch disconnector | |
|---|---|---|
| Voltage | 415 V AC | |
| Material | GRP / Polyester |
The ABB OTP63A3M is a three-pole enclosed switch-disconnector used for manual electrical switching and isolation of industrial machinery, motors and other suitable low-voltage equipment.
The OTP63A3M is specified for 63 A at 415 V AC under utilisation category AC-23.
The switch has three main switching poles (3P), suitable for switching the three phase conductors of a compatible electrical circuit.
AC-23 is an IEC utilisation category for switching motor loads or other highly inductive loads. It helps determine whether a switch-disconnector is suitable for the intended electrical duty.
The OTP63A3M is specified with a glass-reinforced plastic (GRP) enclosure, providing a durable housing for industrial switching equipment.
The OTP63A3M has a specified 70 mm² terminal conductor capacity. Final cable selection must also account for conductor type, installation conditions and the manufacturer's termination instructions.
Yes. The OTP63A3M includes a fixed neutral terminal. Its three main switching poles are intended for the phase conductors.
Yes. Its 63 A AC-23 rating at 415 V AC makes it suitable for appropriately rated motor switching and isolation applications.
No. The OTP63A3M is a switch-disconnector, not an overload or short-circuit protective device. Suitable protective equipment must be provided as required by the installation design.
The ABB order code is OTP63A3M, with manufacturer reference 1SCA022613R1200.
ABB OTP enclosed switch-disconnectors provide practical switching and isolation solutions for industrial machinery and electrical distribution systems. With its 63 A AC-23 rating at 415 V AC, three-pole mechanism, GRP enclosure, 70 mm² terminal capacity and fixed neutral terminal, the OTP63A3M offers a robust solution for industrial electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.