Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OT400DLUU4C 400 A four-pole steel enclosed manual changeover switch with I-0-II operation, IP54 protection, black padlockable handle and 400 A AC-22A and AC-23A ratings at 415 V AC for industrial electrical source selection and isolation.
£3,578.28
The ABB OT400DLUU4C is a 400 A, 4-pole steel enclosed manual changeover switch designed for switching between two electrical supply sources in industrial and commercial low-voltage distribution systems. Part of the ABB OT enclosed switch-disconnector range, it provides a practical solution for applications requiring controlled power source selection, manual load switching and electrical isolation.
Featuring a 400 A AC-22A and AC-23A rating at 415 V AC, the OT400DLUU4C combines a robust galvanised steel enclosure with a black I-0-II operating handle. Its IP54 protection rating and four-pole configuration make it suitable for appropriately designed electrical installations where reliable manual changeover between normal and alternative power supplies is required.
The enclosure incorporates blank cable entry provisions, neutral and protective earth terminals, a padlockable operating handle and an interlocked cover. Identified by ABB manufacturer product ID 1SCA022474R8120 and order code OT400DLUU4C, the unit measures 800 × 400 × 330 mm and provides a durable enclosed switching solution for industrial power distribution.
The ABB OT400DLUU4C provides a manually operated means of transferring compatible electrical loads between two supply sources. Its I-0-II switching arrangement allows an operator to select source I, disconnect both sources in the central OFF position or select source II.
This arrangement is particularly relevant to installations incorporating a normal mains supply and an alternative power source, such as a standby generator. The four-pole configuration supports electrical systems requiring coordinated changeover of four conductors, subject to the installation's neutral switching, earthing and electrical distribution requirements.
With 400 A AC-22A and AC-23A ratings at 415 V AC, the OT400DLUU4C is suitable for appropriately rated industrial distribution loads. Final selection must consider operating voltage, load current, switching duty, prospective short-circuit current and the requirements of the complete electrical installation.
The galvanised steel enclosure incorporates a protective polyester coating and an IP54 protection rating. Its black padlockable operating handle supports controlled switching and maintenance isolation, while the interlocked cover helps manage access to internal components.
The blank cable entry arrangement allows suitable cable entry plates and associated components to be selected for the installation. Cable entry components must be installed correctly to maintain the required enclosure protection. Compatible auxiliary contacts may also be fitted where switching status indication or electrical interlocking is required.
The OT400DLUU4C is a manual changeover switch, not an automatic transfer switch. Automatic supply monitoring, generator starting and automatic transfer functionality require additional appropriately designed equipment.
Tick the specs you need, then view products that match.
| Device Type | Enclosed changeover switch | |
|---|---|---|
| Voltage | 1000 V AC | |
| Material | Steel |
The ABB OT400DLUU4C is a 400 A, 4-pole enclosed manual changeover switch designed to transfer compatible electrical loads between two supply sources. Typical applications include mains-to-generator changeover and industrial electrical distribution systems.
The OT400DLUU4C has a 400 A rated current. ABB specifies 400 A for both AC-22A and AC-23A at 415 V AC. Suitability for a particular installation depends on operating voltage, connected load and applicable switching duty.
The I-0-II arrangement provides three operating positions: source I, central OFF and source II. It allows an operator to manually select between two electrical supplies while providing an intermediate disconnected position.
The ABB OT400DLUU4C features an IP54-rated galvanised steel enclosure measuring 800 × 400 × 330 mm. The enclosure has a protective polyester coating and provides protection against limited dust ingress and splashing water when correctly installed.
The OT400DLUU4C includes a black padlockable operating handle accommodating up to three padlocks and an interlocked enclosure cover. No auxiliary contacts are fitted as standard, but compatible accessories can provide a maximum configuration of 4 normally open and 4 normally closed auxiliary contacts.
ABB OT enclosed changeover switches provide dependable manual source selection and electrical isolation for industrial and commercial power distribution systems. With its 400 A rating, four-pole I-0-II switching arrangement, IP54 steel enclosure, padlockable operating handle and auxiliary contact expansion capability, the OT400DLUU4C is a practical choice for electrical contractors, industrial maintenance teams, machinery manufacturers and power distribution specialists.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.