Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OT250KLUU4C 250 A four-pole steel enclosed manual changeover switch with I-0-II operation, IP54 protection, black padlockable handle and 250 A AC-22A and AC-23A ratings at 415 V AC for industrial electrical source selection and isolation.
£2,981.01
The ABB OT250KLUU4C is a 250 A, 4-pole enclosed changeover switch designed for manual switching between two electrical supply sources in industrial and commercial low-voltage installations. Part of the ABB OT enclosed switch-disconnector range, it provides a robust solution for applications requiring controlled source selection, electrical isolation and dependable load switching.
Featuring a galvanised steel enclosure, a black I-0-II operating handle and a 250 A AC-22A and AC-23A rating at 415 V AC, the OT250KLUU4C is suitable for appropriately rated electrical distribution and power changeover applications. Its four-pole arrangement supports installations requiring simultaneous changeover of four conductors.
Identified by ABB manufacturer product ID 1SCA022474R7660 and order code OT250KLUU4C, this model features an IP54 enclosure, blank cable entry provisions and a padlockable operating handle. Its 800 × 400 × 230 mm enclosure provides a substantial housing for industrial electrical switching installations.
The ABB OT250KLUU4C provides a manually operated means of transferring compatible electrical loads between two supply sources. Its I-0-II switching arrangement allows the operator to select the first source, disconnect both sources in the central OFF position or select the second source.
This arrangement is relevant to installations incorporating a normal mains supply and an alternative supply, such as a generator. The four-pole configuration can support applications where four conductors require coordinated switching, subject to the installation's earthing, neutral and electrical distribution requirements.
The 250 A AC-22A and AC-23A ratings at 415 V AC make the switch suitable for appropriately selected mixed, inductive and motor loads. Final equipment selection must consider the operating voltage, load current, switching duty, prospective fault current and applicable electrical standards.
The IP54 galvanised steel enclosure provides protection against limited dust ingress and splashing water. Its padlockable handle and interlocked cover support controlled operation and maintenance access. The blank cable entry arrangement requires suitable cable entry components and installation practices to maintain the required enclosure protection.
The OT250KLUU4C is a manual changeover device, not an automatic transfer switch. Automatic supply monitoring, generator starting and automatic source transfer require additional appropriately designed equipment.
Tick the specs you need, then view products that match.
| Device Type | Enclosed changeover switch | |
|---|---|---|
| Voltage | 1000 V AC | |
| Material | Steel |
The ABB OT250KLUU4C is a 250 A, 4-pole enclosed manual changeover switch designed to transfer compatible electrical loads between two supply sources. Typical applications include mains-to-generator changeover and industrial electrical distribution systems.
The OT250KLUU4C has a 250 A rated current. ABB specifies 250 A for both AC-22A and AC-23A at 415 V AC. Suitability for a particular installation depends on its operating voltage, connected load and applicable switching duty.
The I-0-II arrangement provides three operating positions: source I, central OFF and source II. It allows an operator to manually select between two electrical supplies while providing an intermediate disconnected position.
The ABB OT250KLUU4C features an IP54-rated galvanised steel enclosure measuring 800 × 400 × 230 mm. The enclosure provides protection against limited dust ingress and splashing water when correctly installed.
The OT250KLUU4C includes a black padlockable operating handle and an interlocked enclosure cover. No auxiliary contacts are fitted as standard, but the switch supports a maximum auxiliary contact configuration of 4 normally open and 4 normally closed contacts using compatible accessories.
ABB OT enclosed changeover switches provide dependable manual source selection and electrical isolation for industrial and commercial power distribution systems. With its 250 A rating, four-pole I-0-II switching arrangement, IP54 steel enclosure, padlockable operating handle and auxiliary contact expansion capability, the OT250KLUU4C is a practical choice for electrical contractors, industrial maintenance teams, machinery manufacturers and power distribution specialists.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.