Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OTP75A6B (1SCA022401R2710) is a six-pole plastic enclosed switch-disconnector with a 37 kW motor switching rating at 400 V AC, 80 A AC-23 operational current, IP65 protection, red/yellow handle and Type I flange cable entry provisions.
£434.11
The ABB OTP75A6B (1SCA022401R2710) is a heavy-duty six-pole plastic enclosed switch-disconnector designed for dependable local electrical isolation and load switching in industrial installations. Part of ABB's OTP enclosed safety switch range, it combines a 37 kW motor switching rating at 400 V AC, a red/yellow operating handle and an enclosure with IP65 ingress protection.
The OTP75A6B is designed for applications requiring the simultaneous switching of six electrical conductors. Its 80 A AC-23 operational current rating at 400 V AC makes it suitable for appropriately rated motor and inductive-load switching applications. The six-pole arrangement offers additional flexibility for industrial machinery, multi-circuit equipment and electrical installations requiring more than three switched conductors.
Featuring Type I flange cable entry provisions, the ABB OTP75A6B supports practical cable routing into its durable plastic enclosure. The enclosure measures 400 × 200 × 140 mm and incorporates a red/yellow manual operating handle. A normally open auxiliary contact and neutral terminal are included, while compatible cable entry flanges must be ordered separately.
The ABB OTP75A6B provides a manually operated switching and isolation solution for industrial electrical systems requiring six switched poles. Its 37 kW rating at 400 V AC and 80 A AC-23 operational current make it suitable for appropriately selected motor and inductive-load applications. The six-pole configuration enables multiple conductors to be switched through one common operating mechanism.
The IP65 plastic enclosure helps protect the switching mechanism against dust and water jets when correctly installed. Its Type I flange entry arrangement accommodates compatible cable entry accessories, which must be selected and ordered separately. The included normally open auxiliary contact can be incorporated into suitable indication or control circuits, while the neutral terminal supports appropriate wiring arrangements.
Electrical designers should confirm the applicable switching duty, circuit protection, conductor arrangements and installation requirements before commissioning. Where the switch is used for maintenance isolation, the complete installation must provide the necessary means of secure disconnection and verification.
Tick the specs you need, then view products that match.
| Device Type | Enclosed switch disconnector | |
|---|---|---|
| Voltage | 750 V AC | |
| Material | Plastic |
The ABB OTP75A6B is a six-pole plastic enclosed switch-disconnector used for manual electrical switching and isolation in industrial installations. It is suitable for appropriately rated motors, machinery and multi-conductor electrical systems.
The OTP75A6B has a specified 37 kW motor switching rating at 400 V AC. The suitability of the switch depends on the actual motor current, operating voltage and switching duty.
The OTP75A6B has an 80 A AC-23 operational current rating at 400 V AC. Its rated uninterrupted current is 115 A. These ratings describe different operating conditions and should not be treated as interchangeable.
The ABB OTP75A6B has six switching poles, allowing multiple conductors to be operated simultaneously through a common manual switching mechanism.
The OTP75A6B has an IP65 enclosure protection rating, providing dust-tight protection and resistance to water jets when correctly installed with suitable cable entry fittings.
The switch is equipped with a red/yellow operating handle, providing a clearly identifiable manual switching interface for industrial electrical equipment.
The OTP75A6B has Type I flange cable entry provisions at the top and bottom of its enclosure. Compatible flanges must be selected to suit the installation.
No. The enclosure has Type I flange entry provisions, but compatible cable entry flanges must be ordered separately.
Yes. The OTP75A6B is supplied with one normally open auxiliary contact. Compatible accessories allow expansion up to two normally open and two normally closed auxiliary contacts.
Yes. The ABB OTP75A6B includes a neutral terminal for suitable electrical wiring arrangements. The neutral terminal is separate from the six switched poles.
The OTP75A6B enclosure measures 400 mm high × 200 mm wide × 140 mm deep and has an approximate product weight of 3.2 kg.
Both are six-pole ABB OTP enclosed switch-disconnectors in the same power class. The OTP75A6B uses Type I flange cable entry provisions, whereas the OTP75A6M uses metric cable entry knockouts. The appropriate version depends on the installation and cable entry requirements.
Yes. The OTP75A6B is suitable for appropriately rated industrial motor switching and isolation applications, with a specified 37 kW operational power rating at 400 V AC. The complete installation must meet the relevant electrical safety and isolation requirements.
ABB OTP enclosed switch-disconnectors are designed for electrical contractors, industrial maintenance engineers, panel builders and machinery manufacturers requiring dependable local switching and isolation. The ABB OTP75A6B (1SCA022401R2710) combines six-pole operation, a 37 kW motor switching rating at 400 V AC, IP65 protection, a red/yellow operating handle and Type I flange cable entry provisions for industrial electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.