Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OTP36A6M (1SCA022401R2620) 45 A six-pole enclosed safety switch-disconnector with a 22 kW AC-23A motor rating at 380–415 V AC, IP65 grey plastic enclosure, red and yellow padlockable pistol handle, interlocked cover and one normally open auxiliary contact for industrial machinery and electrical isolation.
£175.88
The ABB OTP36A6M (1SCA022401R2620) is a robust 45 A, 6-pole enclosed safety switch-disconnector designed for manual switching and electrical isolation in industrial machinery, motor installations and low-voltage distribution systems. Part of the ABB OTP plastic enclosed switch range, it combines six main switching poles, a durable protective enclosure and a highly visible red and yellow operating handle.
With a 45 A AC-23A operational current rating at 380–415 V AC and a corresponding 22 kW motor switching rating, the OTP36A6M is suitable for appropriately rated industrial motor and inductive-load applications. Its six-pole construction provides additional switching flexibility compared with conventional three-pole isolators, allowing multiple conductors to be disconnected together through a single operating mechanism.
The OTP36A6M features a grey IP65 plastic enclosure, an IK08 impact resistance rating and a padlockable red and yellow pistol-grip handle. It is supplied with one normally open auxiliary contact, a fixed neutral terminal, protective earth terminals and top and bottom cable-entry knockouts. These features make it a practical enclosed switching solution for machine builders, electrical contractors, panel manufacturers and industrial maintenance engineers.
The ABB OTP36A6M is designed to provide dependable manual switching and isolation where an installation requires more than the three main switching poles found on conventional three-phase isolators. Its six-pole construction enables multiple conductors to be switched together using one operating mechanism, making it suitable for appropriately engineered multi-conductor isolation arrangements.
For industrial motor applications, the OTP36A6M provides a 45 A AC-23A operational current rating at 380–415 V AC, corresponding to a 22 kW motor switching rating. AC-23A is a utilisation category associated with switching motor loads and other highly inductive loads. The correct device rating must always be selected according to the operating voltage, connected load and applicable switching duty.
The red and yellow pistol-grip handle provides a clearly visible manual control point on the front of the enclosure. Its padlocking capability supports maintenance isolation and lockout arrangements, while the interlocked cover helps restrict normal access to the internal switching equipment when the handle is in the ON position. The cover interlock can be defeated for authorised access where permitted by the manufacturer's instructions and relevant safety procedures.
The OTP36A6M is housed in a grey plastic enclosure rated IP65, offering protection against dust and water jets when correctly installed. The IK08 impact resistance rating provides additional durability for industrial settings. Knockout openings at the top and bottom allow cable entries to be configured for the installation, with suitable cable glands required to maintain the intended enclosure protection.
For control and indication purposes, the unit includes one normally open auxiliary contact. This can be used with a compatible electrical control or monitoring circuit, for example to provide switch-position signalling. The assembly also incorporates a fixed neutral terminal and protective earth terminals, although the neutral terminal is not an additional switched pole.
The OTP36A6M is a manual switch-disconnector, not an automatic circuit breaker or motor overload relay. It does not independently provide automatic overload or short-circuit tripping. The complete installation must include appropriately selected circuit protection, conductor sizing and safe isolation procedures.
Tick the specs you need, then view products that match.
| Device Type | Enclosed safety switch / isolator | |
|---|---|---|
| Voltage | 750 V AC | |
| Material | Plastic |
The ABB OTP36A6M is a six-pole enclosed safety switch-disconnector used for manual electrical switching and isolation in industrial machinery, motor installations and low-voltage distribution systems. Its six-pole design supports applications requiring simultaneous disconnection of multiple conductors.
The OTP36A6M has six main switching poles (6P). All six poles are operated through the same mechanical switching mechanism, allowing multiple conductors to be disconnected together.
The OTP36A6M is rated at 45 A AC-23A and 63 A AC-22A at 380–415 V AC. Its conventional thermal current when fully enclosed is 80 A. These values describe different operating conditions and should not be used interchangeably.
The OTP36A6M has a rated operational motor switching power of 22 kW at 380–415 V AC under AC-23A conditions. The suitable motor rating depends on the supply voltage, load characteristics and installation design.
The OTP36A6M features an IP65 plastic enclosure, providing protection against dust ingress and water jets when correctly installed. Its housing also has an IK08 impact resistance rating.
The OTP36A6M has a red and yellow pistol-grip operating handle with clear I–O / ON–OFF indication. The protective enclosure is grey.
Yes. The OTP36A6M has a padlockable operating handle that can be used as part of a suitable electrical isolation and lockout procedure. The complete installation must follow the applicable safety requirements.
Yes. The OTP36A6M is supplied with one normally open (1 NO) auxiliary contact. Its maximum supported auxiliary contact arrangement is 1 NO + 1 NC when configured with compatible accessories.
Yes. The OTP36A6M includes a fixed neutral terminal and protective earth terminals. The fixed neutral connection is separate from the six main switching poles.
The enclosure provides 2 × M32 + M16 cable-entry knockouts at the top and bottom. Suitable cable glands should be selected to maintain the required enclosure protection.
The OTP36A6M measures 200 mm high × 145 mm wide × 90 mm deep, making it suitable for appropriately sized industrial mounting locations.
Yes. The OTP36A6M includes an interlocked enclosure cover designed to restrict normal opening while the switch is ON. An authorised defeat facility is provided for controlled access in accordance with the manufacturer's instructions.
The OTP36A6M is specified as a manual safety switch-disconnector, not a dedicated emergency stop installation device. Any emergency switching application requires an appropriately designed and compliant complete safety system.
No. The OTP36A6M is a manually operated switch-disconnector and does not independently provide automatic overload or short-circuit tripping. Appropriate protective devices must be selected separately for the electrical installation.
OTP36A6M is the ABB product model and order code, while 1SCA022401R2620 is the manufacturer's corresponding product identification number. Both refer to the same 45 A, six-pole plastic enclosed safety switch-disconnector.
ABB OTP enclosed switch-disconnectors provide dependable manual switching and electrical isolation for industrial machinery and low-voltage installations. The OTP36A6M combines six-pole switching, a 45 A AC-23A operational rating at 380–415 V AC, a 22 kW motor switching capability, IP65 plastic enclosure, red and yellow padlockable handle and integrated auxiliary contact in a practical assembly for electrical contractors, machine builders, panel manufacturers and industrial maintenance professionals.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.