Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SCA022401R1900 ABB 6-Pole 22kW IP65 Plastic Enclosed Safety Switch
ABB OTP36T6M six-pole plastic enclosed safety switch-disconnector rated 22 kW and 45 A AC-23A at 400–415 V AC, featuring an IP65 UV-protected polycarbonate enclosure, padlockable black pistol handle, metric cable-entry knockouts and one normally open auxiliary contact.
£213.54
Why Choose the ABB OTP36T6M 6-Pole 22kW IP65 Enclosed Safety Switch?
The ABB OTP36T6M is a robust six-pole plastic enclosed safety switch-disconnector designed for reliable electrical isolation of industrial machinery, motors and equipment. Part of the ABB OTP enclosed switch range, it combines a heavy-duty switching mechanism with a durable IP65 enclosure, making it suitable for demanding indoor and outdoor electrical installations.
Rated for 22 kW motor loads at 400–415 V AC under utilisation category AC-23A, the OTP36T6M provides dependable manual isolation for industrial electrical systems. Its six-pole configuration enables simultaneous switching of six conductors, making it particularly useful in applications requiring more switching poles than conventional three-pole isolators.
The switch features a black padlockable pistol handle, an interlocked enclosure cover and metric threaded cable-entry knockouts. Its UV-protected, glass-fibre-reinforced polycarbonate housing provides IP65 protection against dust and water jets. Supplied with a normally open auxiliary contact and fixed neutral and protective earth terminals, the OTP36T6M offers a practical, ready-to-install isolation solution for industrial control and power distribution systems.
Key Advantages
- Six-pole switching configuration for applications requiring simultaneous isolation of multiple conductors.
- 22 kW motor switching capacity at 400–415 V AC under AC-23A utilisation conditions.
- 45 A AC-23A operational current rating at 380–415 V AC.
- IP65 enclosure protection against dust ingress and low-pressure water jets.
- UV-protected glass-fibre-reinforced polycarbonate enclosure suitable for indoor and outdoor installations.
- Padlockable black pistol handle supporting controlled maintenance isolation.
- Interlocked enclosure cover with a defeatable interlocking mechanism for authorised maintenance.
- Metric threaded knockouts for convenient power and control cable installation.
- One normally open auxiliary contact supplied for control or indication functions.
- Fixed neutral and protective earth terminals included.
- Compact enclosure dimensions of 200 × 145 × 90 mm.
- Suitable for use as a local safety switch, maintenance isolator or main switch where the application requirements are met.
Key Features
- ABB OTP plastic enclosed safety switch series.
- Model OTP36T6M, ABB catalogue reference 1SCA022401R1900.
- Six main switching poles (6P).
- 22 kW AC-23A motor rating at 400–415 V AC.
- 45 A AC-23A rated operational current at 380–415 V AC.
- 63 A AC-22A rated operational current at 380–415 V AC.
- 80 A conventional enclosed thermal current.
- Manual ON/OFF switching with black pistol-style handle.
- Handle padlockable with up to three padlocks.
- Interlocked cover with defeatable interlocking provision.
- Grey, UV-protected, glass-fibre-reinforced polycarbonate enclosure.
- IP65 ingress protection and IK08 impact resistance.
- Top and bottom metric threaded cable-entry knockouts.
- 2 × M32 + M16 cable openings per side.
- One factory-mounted normally open auxiliary contact.
- Fixed neutral and protective earth terminals.
- Suitable for conductor cross-sections from 1.5–35 mm².
- Designed for fixed mounting near machinery and industrial equipment.
Technical Specifications
- Manufacturer: ABB
- Series: OTP Plastic Enclosed Safety Switches
- Model: OTP36T6M
- ABB order code: OTP36T6M
- ABB product ID: 1SCA022401R1900
- Product type: Plastic enclosed safety switch-disconnector
- Product group: 311004-Plastic Enclosed Switches (OTP)
- Number of poles: 6
- Pole configuration: 6P
- Rated operational power AC-23A at 380–415 V AC: 22 kW
- Rated operational power AC-23A at 500 V AC: 22 kW
- Rated operational power AC-23A at 690 V AC: 15 kW
- Rated operational current AC-23A at 380–415 V AC: 45 A
- Rated operational current AC-23A at 500 V AC: 45 A
- Rated operational current AC-23A at 690 V AC: 20 A
- Rated operational current AC-22A at 380–415 V AC: 63 A
- Rated operational current AC-22A at 500 V AC: 63 A
- Rated operational current AC-22A at 690 V AC: 63 A
- Conventional enclosed thermal current: 80 A
- Rated operational voltage: 750 V AC
- Rated insulation voltage (Ui): 750 V
- Rated short-time withstand current (Icw): 1.5 kA for 1 s
- Rated short-circuit making capacity (Icm): 2.1 kA at 690 V AC
- Enclosure protection rating: IP65
- Impact resistance: IK08
- Enclosure material: Glass-fibre-reinforced polycarbonate plastic
- UV protection: Yes
- Enclosure colour: Grey
- Handle type: Black pistol handle
- Handle operation: Manual ON/OFF
- Padlocking: Up to three padlocks
- Cover interlock: Included, with defeatable interlocking
- Mounted auxiliary contacts: 1 NO + 0 NC
- Fixed neutral terminal: Included
- Protective earth terminals: Included
- Cable-entry positions: Top and bottom
- Cable-entry arrangement: 2 × M32 + M16 per side
- Conductor cross-section: 1.5–35 mm²
- Main terminal tightening torque: 2 N·m
- Wire stripping length: 13 mm
- Enclosure height: 200 mm
- Enclosure width: 145 mm
- Enclosure depth: 90 mm
- Dimensions (H × W × D): 200 × 145 × 90 mm
- Net weight: 1.2 kg
- Country of origin: Finland
- EAN / GTIN: 6417019131047
- Applicable standards: IEC 60947-1 and IEC 60947-3
Reliable Six-Pole Electrical Isolation for Industrial Machinery
The ABB OTP36T6M is designed for installations requiring dependable disconnection of multiple electrical conductors. Unlike conventional three-pole isolators, its six-pole switching arrangement allows six circuits or conductors to be switched together using a single operating mechanism, provided the installation is designed within the switch's electrical ratings.
This configuration can be useful in machinery and electrical systems with multiple power conductors, coordinated switching requirements or specialised isolation arrangements. The switch is intended for isolation and load switching rather than automatic control, reversing or electrical fault protection.
For motor applications, the OTP36T6M provides an AC-23A rating of 22 kW at 400–415 V AC. The corresponding operational current is 45 A. ABB also specifies an 80 A conventional enclosed thermal current, which represents a different rating and should not be substituted for the AC-23A motor-switching current.
The switch incorporates a black pistol handle that can accommodate up to three padlocks, helping maintenance personnel secure the isolator against unintended operation. Its interlocked cover helps restrict access while the switch is energised, while the defeatable interlock permits authorised access when required by approved maintenance procedures.
IP65 Protection and Practical Cable Installation
The OTP36T6M uses a glass-fibre-reinforced polycarbonate enclosure with UV protection, providing a durable housing for industrial environments. Its IP65 rating indicates dust-tight construction and protection against water jets when the enclosure and cable entries are correctly installed and sealed.
The enclosure provides metric threaded cable-entry knockouts at the top and bottom, with 2 × M32 + M16 openings per side. These allow power and control cables to be routed into the enclosure using appropriately selected cable glands. Compression glands must be ordered separately where required.
A factory-mounted normally open auxiliary contact is provided for suitable control or status-indication applications. Fixed neutral and protective earth terminals support practical wiring arrangements, while the main terminals accommodate conductors from 1.5–35 mm².
With dimensions of 200 × 145 × 90 mm, the OTP36T6M provides a compact enclosed isolation solution suitable for mounting close to machinery, motors and electrical equipment.
Typical Applications
- Six-pole electrical isolation in industrial machinery.
- Motor isolation for equipment rated up to 22 kW at 400–415 V AC under AC-23A conditions.
- Industrial manufacturing and production equipment.
- Local safety switches for machinery maintenance.
- Electrical systems requiring coordinated switching of six conductors.
- Conveyor and material handling installations.
- Industrial pumps and ventilation equipment.
- Packaging and processing machinery.
- Industrial electrical distribution and control panels.
- Outdoor machinery isolation where IP65 protection is required.
- OEM equipment and industrial machine building.
- Electrical maintenance and service isolation points.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Enclosed safety switch / isolator | |
|---|---|---|
| Voltage | 750 V AC | |
| Material | Polycarbonate |
Frequently Asked Questions
What is the ABB OTP36T6M used for?
The ABB OTP36T6M is a six-pole plastic enclosed safety switch-disconnector used for manual electrical isolation of industrial machinery, motors and equipment.
How many poles does the OTP36T6M have?
The OTP36T6M has six main switching poles (6P), allowing six electrical conductors to be disconnected together through one operating mechanism.
What is the motor power rating of the OTP36T6M?
The switch is rated for 22 kW at 400–415 V AC under utilisation category AC-23A. Its corresponding rated operational current is 45 A.
What is the current rating of the ABB OTP36T6M?
The OTP36T6M has an 80 A conventional enclosed thermal current. Its operational switching ratings include 45 A AC-23A and 63 A AC-22A at 380–415 V AC.
What is the enclosure protection rating?
The OTP36T6M has an IP65 protection rating, providing dust-tight protection and resistance to water jets when correctly installed and sealed.
Is the ABB OTP36T6M suitable for outdoor installation?
Yes. Its UV-protected, glass-fibre-reinforced polycarbonate enclosure is designed for suitable indoor and outdoor installations, subject to environmental conditions and correct cable-entry sealing.
Can the OTP36T6M be padlocked in the off position?
Yes. The black pistol handle is padlockable with up to three padlocks, supporting controlled electrical isolation during maintenance.
Does the OTP36T6M include auxiliary contacts?
Yes. The OTP36T6M is supplied with one normally open auxiliary contact for compatible control and indication circuits.
What cable entries does the OTP36T6M provide?
The enclosure provides top and bottom metric threaded knockouts with an arrangement of 2 × M32 + M16 per side. Suitable cable glands and seals must be selected separately.
What are the dimensions of the ABB OTP36T6M?
The enclosure measures 200 mm high, 145 mm wide and 90 mm deep, with a net weight of approximately 1.2 kg.
Does the OTP36T6M provide overload or short-circuit protection?
No. The OTP36T6M is a switch-disconnector intended for switching and isolation. Suitable overload and short-circuit protective devices must be provided where required by the installation design.
What is the ABB order code for the OTP36T6M?
The ABB order code is OTP36T6M, and the corresponding ABB manufacturer product ID is 1SCA022401R1900.
Trusted by Industrial Electrical and Automation Professionals
ABB OTP enclosed safety switches provide dependable electrical isolation for industrial machinery and power distribution applications. With its six-pole switching mechanism, 22 kW AC-23A motor rating, IP65 enclosure and padlockable operating handle, the OTP36T6M offers a practical solution for engineers, electrical contractors, machine builders and industrial maintenance teams.
