Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OTP75T3U (1SCA022401R0250) is a 37 kW three-pole enclosed switch disconnector with an 80 A AC-23A rating at 415 V AC, IP65 grey plastic enclosure, blank cable entry areas, black selector handle and one included normally open auxiliary contact for industrial machinery isolation.
£254.58
The ABB OTP75T3U (ABB product ID 1SCA022401R0250) is a robust 3-pole, 37 kW plastic enclosed switch disconnector designed for dependable manual isolation and load switching in industrial electrical installations. Part of the ABB OTP enclosed safety switch range, it combines an IP65-rated grey plastic enclosure, black selector operating handle and a distinctive blank cable entry configuration for installations requiring customised cable routing.
Designed for industrial machinery and motor isolation, the OTP75T3U provides an 80 A AC-23A operational current rating at 415 V AC and a corresponding 37 kW motor-load switching rating. At 690 V AC, it is rated for 40 A and 37 kW under AC-23A operating conditions. Its three mechanically linked switching poles enable simultaneous disconnection of three-phase conductors, making it suitable for local machinery isolation and industrial power distribution applications.
The OTP75T3U is supplied in a 400 × 200 × 140 mm enclosure with blank top and bottom cable entry areas rather than predefined threaded knockouts. This allows installers to prepare cable openings according to their equipment layout and cable gland requirements. A black ON/OFF selector handle, interlocked cover, neutral and protective earth terminals, and one normally open auxiliary contact are included, providing a comprehensive enclosed switching solution.
The ABB OTP75T3U provides a dependable method of manually disconnecting industrial electrical equipment from its power supply. Its three mechanically linked switching poles open together when the black selector handle is moved to the OFF position, allowing simultaneous isolation of three phase conductors. This makes it suitable for machinery, motors and electrical distribution equipment requiring a dedicated local disconnecting point.
The switch is designed for AC-23A motor-load switching duties within its specified ratings. At 415 V AC, it provides an 80 A operational current rating and 37 kW operational power rating. These ratings make it suitable for compatible pumps, fans, compressors, conveyors and production machinery. The connected motor's operating current, starting characteristics and switching duty must be considered when selecting the switch.
A distinguishing feature of the OTP75T3U is its blank cable entry arrangement. Unlike the OTP75T3M version, which features metric threaded knockouts, the OTP75T3U is supplied with blank cable entry areas at the top and bottom. This enables installers to determine the position and size of cable openings according to the installation layout, gland requirements and cable routing.
The IP65 plastic enclosure provides protection against dust and water jets when properly installed. Because cable openings are prepared during installation, the selection and fitting of suitable glands and sealing components is particularly important. Correct preparation helps maintain the enclosure's specified environmental protection and prevents damage to the enclosure during installation.
The black selector handle provides clearly identified ON and OFF positions and supports padlocking for maintenance isolation. The enclosure includes a cover interlock and defeatable interlock, helping control normal access to internal components. The switch should be operated and maintained in accordance with the manufacturer's instructions and applicable electrical safety procedures.
The OTP75T3U is supplied with one normally open auxiliary contact, which can be used for compatible switch-position indication or control-system feedback. Additional auxiliary contacts may be installed within the manufacturer's specified configuration limits. Neutral and protective earth terminals are also provided for installation convenience.
As a switch disconnector, the OTP75T3U performs manual switching and isolation rather than automatic overload or short-circuit protection. Suitable upstream protective devices must be provided where required by the electrical installation.
Tick the specs you need, then view products that match.
| Device Type | Enclosed safety switch / isolator | |
|---|---|---|
| Material | Plastic |
The ABB OTP75T3U is a 3-pole enclosed switch disconnector designed for manual switching and electrical isolation of industrial motors, machinery and low-voltage electrical equipment.
The OTP75T3U has an AC-23A operational power rating of 37 kW at 415 V AC and 37 kW at 690 V AC. The corresponding current ratings and actual motor operating characteristics must be considered when selecting the switch.
The OTP75T3U has an 80 A AC-23A operational current rating at 415 V AC, a 40 A AC-23A rating at 690 V AC and a 115 A rated continuous current. These ratings describe different operating conditions and must not be treated as interchangeable.
The switch has 3 mechanically linked switching poles, allowing simultaneous disconnection of three phase conductors. A neutral terminal is provided, but the neutral is not switched by the three main poles.
The OTP75T3U has an IP65 ingress protection rating. When correctly installed with suitable cable glands and enclosure sealing, it provides protection against dust and water jets.
No. The OTP75T3U has blank top and bottom cable entry areas rather than predefined threaded knockouts. Installers can prepare cable openings according to the installation requirements, using suitable glands and sealing accessories.
The principal difference is the cable entry configuration. The OTP75T3U has blank cable entry areas, while the OTP75T3M has predefined metric threaded knockouts. Both are three-pole enclosed safety switches with a 37 kW AC-23A rating at 415 V AC.
The OTP75T3U features a black selector operating handle with I-O / ON-OFF indication for straightforward manual switching and isolation.
Yes. The OTP75T3U has a padlockable operating arrangement to support controlled isolation during machinery maintenance and repair.
Yes. The OTP75T3U is supplied with one normally open auxiliary contact. Compatible additional auxiliary contacts may be installed, with a maximum configuration of 2 NO + 2 NC.
Yes. The enclosed switch includes neutral and protective earth terminals, supporting convenient termination of compatible electrical circuits.
The enclosure measures 400 mm high × 200 mm wide × 140 mm deep and has a unit weight of approximately 2.4 kg.
Yes. The OTP75T3U is suitable for compatible motor isolation applications within its electrical ratings. Appropriate overload and short-circuit protection must be provided separately where required.
No. The OTP75T3U is a switch disconnector designed for manual switching and electrical isolation. Suitable protective devices must be installed separately to provide overload and short-circuit protection where required.
The ABB OTP75T3U belongs to ABB's enclosed safety switch range for low-voltage electrical switching applications, with its IP65 ingress protection classified according to IEC 60529 and switch-disconnector selection governed by the applicable IEC 60947 requirements.
ABB OTP enclosed safety switches provide dependable manual isolation for industrial machinery and low-voltage electrical installations. With its three-pole switching arrangement, 37 kW AC-23A motor-load rating, IP65 grey plastic enclosure, black selector handle, blank cable entry configuration and included auxiliary contact, the OTP75T3U offers a practical solution for machine builders, electrical contractors and maintenance engineers requiring reliable electrical isolation with flexible cable routing.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.