Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SCA022383R0860 ABB 37 kW 4-Pole IP65 Plastic Enclosed Switch Disconnector with I-Flange
ABB OTP75T4B four-pole plastic enclosed switch disconnector with a 37 kW motor switching specification, IP65 enclosure protection and I-flange arrangement for local electrical isolation of compatible industrial machinery and equipment.
£269.83
Why Choose the ABB OTP75T4B 37 kW 4-Pole IP65 Plastic Enclosed Switch Disconnector?
The ABB OTP75T4B is a 4-pole plastic enclosed switch disconnector designed for local electrical isolation and switching in industrial machinery, motor control systems and low-voltage electrical installations. Part of the ABB OTP enclosed switch range, it combines manual switching functionality with a protective enclosure suitable for demanding industrial applications.
Featuring a 37 kW motor switching specification, an IP65-rated plastic enclosure and an I-flange arrangement, the OTP75T4B provides a practical solution for installations requiring enclosed electrical switching equipment. Its four-pole construction supports applications where four conductors must be controlled in accordance with the installation's electrical design.
Identified by ABB manufacturer product ID 1SCA022383R0860 and order code OTP75T4B, this switch disconnector is suitable for industrial machinery, electrical distribution and motor isolation applications where the specified switching capacity, pole configuration and enclosure protection are required.
Key Advantages
- 37 kW motor switching specification for compatible industrial applications.
- 4-pole configuration supports suitable multi-conductor electrical installations.
- IP65-rated plastic enclosure provides protection against dust and low-pressure water jets.
- I-flange arrangement distinguishes this model from other ABB OTP enclosure variants.
- Manual switching provides a local means of disconnecting electrical equipment.
- Enclosed construction helps protect the switching mechanism from environmental exposure.
- Suitable for appropriately rated industrial motor and machinery applications.
- Supports maintenance and servicing isolation arrangements.
- Provides a dedicated switching point close to industrial equipment.
- Suitable for integration into compatible low-voltage electrical installations.
- Part of the established ABB OTP enclosed switch-disconnector range.
- Clearly identified by its ABB product ID for accurate procurement and replacement.
Key Features
- ABB OTP75T4B enclosed switch disconnector.
- 37 kW specified motor switching power.
- 4-pole switching configuration.
- IP65 enclosure protection rating.
- Plastic enclosure construction.
- I-flange arrangement.
- Manually operated electrical switching mechanism.
- Enclosed design for local equipment isolation.
- Suitable for compatible industrial motor control installations.
- Designed for integration into low-voltage electrical systems.
- Suitable for machinery maintenance and servicing applications.
- ABB OTP enclosed switch family.
- ABB order code: OTP75T4B.
- ABB manufacturer product ID: 1SCA022383R0860.
Technical Specifications
- Manufacturer: ABB
- Series: OTP Plastic Enclosed Switches
- Model: OTP75T4B
- ABB order code: OTP75T4B
- ABB manufacturer product ID: 1SCA022383R0860
- Product group: 311004 – Plastic Enclosed Switches (OTP)
- Product type: Plastic enclosed switch disconnector
- Specified motor switching power: 37 kW
- Number of poles: 4
- Switching configuration: Four-pole
- Enclosure protection rating: IP65
- Enclosure material: Plastic
- Flange arrangement: I-flange
- Switching operation: Manual
- Primary function: Electrical isolation and switching
- Product family: ABB OTP enclosed switch disconnectors
- Typical equipment: Industrial motors, machinery and electrical installations
Reliable Local Isolation for Industrial Motors and Electrical Equipment
The ABB OTP75T4B provides a manually operated means of disconnecting compatible industrial equipment from its electrical supply. Enclosed switch disconnectors are commonly installed near machinery to establish a local isolation point for inspection, maintenance and servicing activities.
Its four-pole switching configuration makes the OTP75T4B relevant to electrical systems requiring four-pole isolation. The exact conductor assignments and switching arrangement must be confirmed against ABB's technical documentation before installation, particularly where neutral conductor switching is required.
The 37 kW motor switching specification makes the device relevant to appropriately rated motor applications. Final selection must consider the operating voltage, motor full-load current, starting characteristics, utilisation category and applicable manufacturer ratings rather than relying on motor power alone.
The IP65 plastic enclosure provides protection against dust ingress and low-pressure water jets when correctly installed. The specified I-flange arrangement should be considered when planning the enclosure installation and any associated cable entry requirements. Suitable upstream overcurrent and short-circuit protection must also be provided as part of the complete electrical system.
Typical Applications
- Local electrical isolation of industrial machinery.
- Compatible three-phase motor installations requiring four-pole switching.
- Pump and pumping system isolation.
- Industrial ventilation and extraction equipment.
- Conveyor and material handling systems.
- Manufacturing and production machinery.
- Packaging and processing equipment.
- Industrial motor control installations.
- Electrical distribution systems requiring four-pole isolation.
- Machinery maintenance and servicing isolation points.
- OEM machinery and industrial automation installations.
- Installations requiring an IP65 enclosed switch with an I-flange arrangement.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Enclosed switch disconnector | |
|---|---|---|
| Material | Plastic |
Frequently Asked Questions
What is the ABB OTP75T4B used for?
The ABB OTP75T4B is a 4-pole plastic enclosed switch disconnector used for local electrical isolation and switching of compatible industrial motors, machinery and electrical equipment. It provides a manually operated switching point for industrial electrical installations.
What motor power is specified for the ABB OTP75T4B?
The OTP75T4B has a specified 37 kW motor switching power. Suitability for a particular motor depends on the operating voltage, full-load current, starting characteristics and applicable utilisation category, which should be checked against ABB's technical documentation.
How many poles does the ABB OTP75T4B have?
The OTP75T4B has four poles. This configuration supports compatible electrical installations requiring four-pole switching. The exact conductor arrangement, including any neutral switching requirements, should be confirmed before installation.
What enclosure protection and flange arrangement does the OTP75T4B have?
The ABB OTP75T4B features an IP65-rated plastic enclosure and an I-flange arrangement. IP65 provides protection against dust ingress and low-pressure water jets when the enclosure is correctly installed.
What is the ABB manufacturer product ID for the OTP75T4B?
The ABB manufacturer product ID is 1SCA022383R0860, and the order code is OTP75T4B. These identifiers help ensure the correct model is selected when specifying, ordering or replacing an enclosed switch disconnector.
Trusted by Industrial Electrical and Machinery Professionals
ABB OTP plastic enclosed switch disconnectors provide practical local electrical isolation solutions for industrial machinery, motor control installations and low-voltage electrical systems. With its 37 kW motor switching specification, four-pole configuration, IP65 plastic enclosure and I-flange arrangement, the OTP75T4B is a suitable option for electrical contractors, machinery manufacturers, industrial maintenance teams and control panel builders selecting compatible enclosed switching equipment.
