Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SCA022342R7030 ABB 630A 4-Pole IP65 Steel Enclosed Switch Disconnector with Open Top and Bottom Cable Entries
ABB OT630KLAA4BZ (1SCA022342R7030) 630 A frame four-pole steel enclosed switch-disconnector with IP65 enclosure classification, black pistol-grip handle and open top and bottom cable entries. Rated operational current 570 A AC-22A up to 690 V AC and 570 A AC-23A up to 415 V AC. Compatible cable entry flanges ordered separately. Enclosure dimensions 1000 x 400 x 230 mm.
£2,437.57
Why Choose the ABB OT630KLAA4BZ 630A 4-Pole IP65 Steel Enclosed Switch Disconnector?
The ABB OT630KLAA4BZ (1SCA022342R7030) is a heavy-duty 630 A four-pole steel enclosed switch-disconnector designed for dependable manual load switching and electrical isolation in industrial and commercial low-voltage installations. Part of ABB's established OT enclosed switch-disconnector range, it combines a high-current switching mechanism with a durable steel enclosure and flexible open cable entry arrangements.
Featuring a 630 A frame designation, four-pole switching configuration and IP65 enclosure classification, the OT630KLAA4BZ is suitable for demanding three-phase electrical distribution systems. ABB's catalogue identifies operational switching ratings of 570 A for AC-22A duty up to 690 V AC and 570 A for AC-23A duty up to 415 V AC. These utilisation-category ratings must be considered when selecting the switch for a particular load.
The switch is housed in a steel sheet enclosure measuring 1000 × 400 × 230 mm, providing mechanical protection for the internal switching assembly. It features a black pistol-grip operating handle with I-O and ON-OFF indication, making it suitable for installations requiring a clearly identifiable manual isolation point.
A key feature of the OT630KLAA4BZ is its open top and bottom cable entry arrangement. The enclosure is supplied without cable entry flanges, allowing compatible C-flange or ring-flange accessories to be selected separately. This provides installation flexibility for large power cables and enables the cable entry arrangement to be tailored to the application.
Key Advantages
- 630 A frame designation for high-current industrial electrical installations.
- Four-pole switching configuration provides simultaneous operation of four main poles.
- 570 A AC-22A operational current rating up to 690 V AC according to ABB's catalogue.
- 570 A AC-23A operational current rating up to 415 V AC for suitable motor and inductive switching duties.
- IP65-classified steel enclosure provides protection against dust and water jets when correctly completed and installed.
- Robust steel sheet construction offers mechanical protection for the internal switch-disconnector.
- Black pistol-grip operating handle provides straightforward manual ON/OFF operation.
- Open top and bottom cable entries support flexible power cable routing.
- Compatible with separately selected C-flange or ring-flange accessories.
- Suitable for large industrial power cables when appropriate cable entry and termination accessories are specified.
- Neutral and protective earth terminal facilities support correctly designed electrical installations.
- Front-operated construction provides accessible switching from the enclosure face.
- Surface-mounted enclosure provides a dedicated industrial isolation point.
- Suitable for industrial and commercial distribution systems requiring four-pole disconnection.
- ABB OT switch-disconnector technology designed for professional electrical installations.
Key Features
- ABB OT enclosed switch-disconnector series.
- 630 A frame designation.
- Four-pole (4P) main switching configuration.
- 570 A AC-22A operational current up to 690 V AC.
- 570 A AC-23A operational current up to 415 V AC.
- Manual I-O / ON-OFF switching.
- Black pistol-grip operating handle.
- Steel sheet enclosure.
- IP65 enclosure classification.
- Open top cable entry.
- Open bottom cable entry.
- Cable entry flanges ordered separately.
- Compatible C-flange and ring-flange entry options.
- Separate cable entry accessories required to complete the enclosure.
- Neutral terminal facilities.
- Protective earth terminal facilities.
- Front-operated switch-disconnector mechanism.
- Surface-mounted construction.
- 1000 × 400 × 230 mm enclosure dimensions.
- Approximately 31 kg catalogue weight.
- ABB manufacturer product ID 1SCA022342R7030.
Technical Specifications
- Manufacturer: ABB
- Product range: OT Enclosed Switch-Disconnectors
- Model: OT630KLAA4BZ
- ABB order code: OT630KLAA4BZ
- ABB product ID: 1SCA022342R7030
- ABB product group: 311019-Metal Enclosed (Loadbreak)
- Product type: Steel enclosed switch-disconnector
- Frame designation: 630 A
- Number of poles: 4
- Switching arrangement: Four-pole manual disconnection
- Rated operational current AC-22A up to 690 V AC: 570 A
- Rated operational current AC-23A up to 415 V AC: 570 A
- Operating mechanism: Manual pistol-grip handle
- Handle colour: Black
- Switching indication: I-O / ON-OFF
- Enclosure material: Steel sheet
- Enclosure protection classification: IP65
- Cable entry configuration: Open top and bottom
- Top cable entry: Open, requiring compatible entry accessories
- Bottom cable entry: Open, requiring compatible entry accessories
- Compatible cable entry types: C-flange or ring-flange arrangements
- Cable entry flanges included: No
- Cable entry flanges: Ordered separately
- Cable entry mounting components: Selected as part of the enclosure installation
- Neutral terminal facilities: Included according to ABB enclosed switch catalogue
- Protective earth terminal: Included
- Mounting type: Surface mounting
- Operating direction: Front operation
- Enclosure height: 1000 mm
- Enclosure width: 400 mm
- Enclosure depth: 230 mm
- Dimensions (H × W × D): 1000 × 400 × 230 mm
- Catalogue weight: Approximately 31 kg
- Applicable switch-disconnector standard: IEC 60947-3
- ABB catalogue reference: 1SCC340009C0201
Reliable Four-Pole Electrical Isolation with Open Cable Entry Flexibility
The ABB OT630KLAA4BZ provides a robust manual switching and isolation solution for high-current three-phase electrical installations. Its four-pole mechanism allows four conductors to be disconnected together, making it suitable for appropriately designed three-phase and neutral distribution systems where four-pole switching is required.
Although the model carries a 630 A frame designation, the operational switching ratings must be considered separately. ABB's enclosed switch catalogue specifies 570 A for AC-22A duty up to 690 V AC and 570 A for AC-23A duty up to 415 V AC. The switch must therefore be selected according to the actual operating voltage, utilisation category and connected load characteristics rather than the frame designation alone.
The black pistol-grip operating handle provides a clear manual means of switching between ON and OFF. Its front-operated arrangement makes the isolation point readily identifiable for authorised personnel. Maintenance procedures must follow the site's electrical safety requirements, including securing the isolation where appropriate and verifying the absence of voltage before work begins.
The steel sheet enclosure provides mechanical protection for the switch-disconnector assembly. ABB lists the enclosure range with an IP65 protection classification, indicating dust-tight construction and resistance to water jets when the enclosure is correctly assembled. However, the OT630KLAA4BZ is supplied with open top and bottom cable entry areas, so the completed installation must incorporate suitable entry plates, flanges, glands and seals to achieve the intended environmental protection.
A distinguishing feature of this model is its open cable entry arrangement. Unlike enclosed switches supplied with blanked or preconfigured cable entries, the OT630KLAA4BZ allows compatible C-flange or ring-flange accessories to be selected according to the required cable sizes and routing. ABB's catalogue also identifies the cable entry components as part of the enclosure fixing arrangement, making correct accessory selection important for both installation and mechanical support.
The four-pole arrangement is useful in systems where the neutral conductor must be switched alongside the three phases. However, the complete installation must comply with the applicable earthing arrangement, neutral switching requirements and electrical regulations. Protective earth conductors must remain correctly bonded and must not be interrupted by the switching mechanism.
The OT630KLAA4BZ is a switch-disconnector rather than an automatic circuit protection device. It does not independently provide overload or short-circuit protection. Suitable upstream circuit breakers, fuses or other protective devices must be incorporated into the installation, with the overall electrical system designed for the prospective fault current and required protection coordination.
Typical Applications
- High-current industrial electrical distribution systems.
- Four-pole isolation of three-phase electrical supplies.
- Industrial machinery supply disconnection.
- Commercial and industrial main distribution circuits.
- Electrical plant rooms and switchrooms.
- Manufacturing and production facilities.
- Industrial motor feeder installations within the applicable switching ratings.
- Large pumping and water treatment installations.
- Heating, ventilation and air conditioning plant supplies.
- Industrial process control equipment supplies.
- Electrical sub-distribution installations.
- Commercial building services infrastructure.
- OEM machinery and industrial electrical assemblies.
- Installations requiring flexible top and bottom cable entries.
- Applications requiring separately configured C-flange or ring-flange cable entry systems.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Enclosed switch disconnector | |
|---|---|---|
| Material | Steel |
Frequently Asked Questions
What is the ABB OT630KLAA4BZ used for?
The ABB OT630KLAA4BZ is a 630 A frame, four-pole steel enclosed switch-disconnector used for manual load switching and electrical isolation in suitable industrial and commercial power distribution installations.
What is the current rating of the ABB OT630KLAA4BZ?
The model has a 630 A frame designation. ABB's enclosed switch catalogue lists operational switching ratings of 570 A for AC-22A duty up to 690 V AC and 570 A for AC-23A duty up to 415 V AC. The appropriate rating depends on the intended switching duty.
How many poles does the ABB OT630KLAA4BZ have?
The switch has a four-pole (4P) configuration, allowing four main conductors to be disconnected together. It can be used in suitable three-phase and neutral systems where four-pole switching is required.
What is the IP protection rating of the ABB OT630KLAA4BZ?
The enclosure is classified as IP65. Because this model is supplied with open top and bottom cable entries, suitable cable entry flanges, glands and sealing arrangements must be installed to achieve the intended enclosure protection.
What material is the ABB OT630KLAA4BZ enclosure made from?
The OT630KLAA4BZ is housed in a steel sheet enclosure designed to provide mechanical protection for the internal switch-disconnector assembly.
What type of operating handle does the ABB OT630KLAA4BZ have?
The switch is supplied with a black pistol-grip operating handle featuring I-O and ON-OFF indication for clear manual switching and isolation.
What does open cable entry mean on the ABB OT630KLAA4BZ?
Open cable entry means that the enclosure is supplied without fitted cable entry plates or flanges at the top and bottom. Compatible accessories must be selected and installed separately according to the cable routing and enclosure sealing requirements.
Are cable entry flanges included with the ABB OT630KLAA4BZ?
No. ABB specifies that the OT630KLAA4BZ is supplied without cable entry flanges. Compatible C-flange or ring-flange accessories must be ordered separately.
Can the ABB OT630KLAA4BZ use C-flange or ring-flange cable entries?
Yes. ABB's enclosed switch catalogue identifies C-flange and ring-flange cable entry options for this open-entry enclosure range. The correct accessories must be selected according to the cable dimensions and installation requirements.
What are the dimensions of the ABB OT630KLAA4BZ?
The enclosure measures 1000 × 400 × 230 mm (H × W × D). ABB's catalogue lists an approximate unit weight of 31 kg.
Does the ABB OT630KLAA4BZ include neutral and earth terminals?
ABB's enclosed switch catalogue identifies neutral and protective earth terminal facilities for this four-pole steel enclosed switch-disconnector range. The exact connection arrangement should be checked against the supplied installation documentation.
What is the difference between the ABB OT630KLAA4BZ and OT630KLUU4BZ?
Both are four-pole steel enclosed switch-disconnectors in the same frame range. The OT630KLAA4BZ is supplied with open top and bottom cable entries, whereas the OT630KLUU4BZ is supplied with blank cable entry arrangements. The correct version depends on the installation and cable entry requirements.
Can the ABB OT630KLAA4BZ be used for machinery isolation?
Yes, where the operational ratings and installation configuration are suitable. The switch can provide a manual isolation point for industrial machinery, but the complete installation must comply with the applicable electrical safety and isolation requirements.
Does the ABB OT630KLAA4BZ provide overload or short-circuit protection?
No. The OT630KLAA4BZ is a switch-disconnector, not a circuit breaker or fused switch. Suitable overload and short-circuit protective devices must be provided separately.
What is the ABB product identification number for the OT630KLAA4BZ?
The ABB order code is OT630KLAA4BZ, and the manufacturer product identification number is 1SCA022342R7030. The product belongs to ABB group 311019-Metal Enclosed (Loadbreak).
Dependable High-Current Isolation for Industrial Electrical Distribution
The ABB OT630KLAA4BZ combines a 630 A frame designation, four-pole switching mechanism, IP65-classified steel enclosure and flexible open top and bottom cable entry arrangement. With a black pistol-grip operating handle, separately configurable cable entry accessories and a robust 1000 × 400 × 230 mm enclosure, it provides a practical manual isolation solution for demanding industrial and commercial electrical distribution systems.
