Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OT400DLRR3TZ (1SCA022340R1910) 400 A three-pole steel enclosed safety switch-disconnector with IP65 galvanised steel enclosure, black padlockable pistol-grip handle, 2NO + 1NC auxiliary contacts and divided top and bottom ring-flange cable entries. Enclosure dimensions 800 x 400 x 230 mm.
£1,689.58
The ABB OT400DLRR3TZ (1SCA022340R1910) is a heavy-duty 400 A three-pole steel enclosed safety switch-disconnector designed for dependable manual switching and electrical isolation in demanding industrial and commercial installations. Part of ABB's established OT enclosed switch-disconnector range, it combines high-current switching capability with a durable metal enclosure and a practical divided cable entry arrangement.
Rated at 400 A for AC-23A operation at 415 V AC, the OT400DLRR3TZ is suitable for appropriately designed three-phase electrical systems, including industrial machinery supplies, motor feeders and power distribution circuits. Its 220 kW AC-23A motor switching capability at 415 V AC supports applications where reliable load switching and a clearly identifiable local isolation point are essential.
The switch is housed in a galvanised steel enclosure with a protective polyester coating and an IP65 ingress protection rating. A black pistol-grip operating handle provides clear ON/OFF operation and can be secured with up to three padlocks in the OFF position. The enclosure incorporates a mechanically interlocked cover with an authorised interlock defeat facility, helping support controlled inspection and maintenance procedures.
A distinguishing feature of the OT400DLRR3TZ is its divided top and bottom cable entry arrangement with ring-flange openings. ABB specifies four ring-flange cable outlets at each entry side, with five cover flanges included. The enclosure measures 800 × 400 × 230 mm and is supplied with 2NO + 1NC auxiliary contacts, making it a practical solution for high-current electrical isolation with associated control and indication requirements.
The ABB OT400DLRR3TZ provides a clearly identifiable local isolation point for industrial electrical systems operating at substantial current levels. Its three-pole switch-disconnector mechanism allows all three phase conductors to be disconnected together, making it suitable for machinery maintenance, electrical servicing and planned isolation of industrial distribution circuits.
The black pistol-grip handle offers straightforward manual switching between the ON and OFF positions. Its OFF-position padlocking facility accommodates up to three padlocks, helping prevent unintended operation while maintenance is being carried out. The enclosure cover is mechanically interlocked with the switch mechanism and incorporates a defeatable interlock facility intended for authorised procedures.
The IP65 galvanised steel enclosure is designed for demanding industrial environments. Its polyester coating provides additional surface protection, while the enclosed construction helps prevent dust and water jets from reaching internal switching components when correctly installed. ABB also identifies an integrated pressure relief function and door earthing through the hinge arrangement. These features complement, but do not replace, suitable upstream circuit protection and safe working procedures.
A distinguishing installation feature is the divided ring-flange cable entry system. The OT400DLRR3TZ provides four ring-flange outlet positions at the top and four at the bottom, allowing cable routing to be adapted to the electrical installation. The supplied cover flanges incorporate knockouts for smaller cable entry fittings, while compatible additional accessories can be selected to suit the required cable arrangement.
Compared with the ABB OT400DLCC3TZ, which uses C-flange cable entry openings, the OT400DLRR3TZ uses divided ring-flange entries. This distinction is important when selecting an enclosed switch for an installation with specific cable gland, cable routing or enclosure entry requirements.
The switch is supplied with 2NO + 1NC auxiliary contacts, wired to terminal blocks for integration into suitable control and indication circuits. These contacts can be used to monitor switch position or support electrical interlocking functions, subject to their rated electrical characteristics and the overall control system design.
As a switch-disconnector rather than an automatic protective device, the OT400DLRR3TZ does not independently provide overload or short-circuit protection. Suitable fuses, circuit breakers or other protective devices must be installed separately. The switch must also be selected according to the relevant utilisation category, operating voltage and load characteristics.
Tick the specs you need, then view products that match.
| Device Type | Enclosed safety switch / isolator | |
|---|---|---|
| Voltage | 750 V AC | |
| Material | Steel |
The ABB OT400DLRR3TZ is a 400 A three-pole steel enclosed safety switch-disconnector used for manual switching and local electrical isolation of industrial machinery, motor feeders and three-phase electrical distribution equipment.
The OT400DLRR3TZ has a 400 A operational current rating for AC-23A duty at 415 V AC. The applicable rating depends on the supply voltage, utilisation category and connected load characteristics.
The switch features a three-pole (3P) configuration, allowing simultaneous disconnection of three phase conductors. It does not include a fourth switched neutral pole.
ABB lists an AC-23A motor switching capability of 220 kW at 415 V AC and 355 kW at 690 V AC. Motor suitability must be checked against the corresponding operational current and the installation's operating conditions.
The OT400DLRR3TZ features an IP65-rated galvanised steel enclosure with a protective polyester coating. It provides protection against dust ingress and water jets when correctly installed with suitable cable entry fittings and sealing arrangements.
The switch includes a black pistol-grip operating handle with ON/OFF indication. It can accommodate up to three padlocks in the OFF position to support controlled electrical isolation during maintenance.
The divided cable entry arrangement provides multiple ring-flange cable outlet positions at the top and bottom of the enclosure. This allows suitable cable entry accessories to be selected according to the number, size and routing of the power cables.
The enclosure provides four ring-flange outlet positions at the top and four at the bottom, giving a total of eight outlet positions. ABB lists five cover flanges as included with the OT400DLRR3TZ.
Both are 400 A three-pole IP65 steel enclosed safety switch-disconnectors. The OT400DLRR3TZ uses divided ring-flange cable entries, whereas the OT400DLCC3TZ uses C-flange cable entry openings. The appropriate model depends on the required cable entry arrangement and installation design.
Yes. The OT400DLRR3TZ is supplied with 2 normally open (2NO) and 1 normally closed (1NC) auxiliary contacts. These contacts are wired to terminal blocks and can be used for suitable switch-position indication or control circuit interlocking applications.
Yes. The black pistol-grip handle can accommodate up to three padlocks in the OFF position. This helps prevent unintended operation during maintenance, although appropriate lockout procedures and verification of the de-energised state must still be followed.
The enclosure measures 800 × 400 × 230 mm (H × W × D). ABB's enclosed switch catalogue lists an approximate unit weight of 27 kg.
The OT400DLRR3TZ has a polyester-coated galvanised steel enclosure with an IP65 protection rating. It can be used in appropriately designed outdoor installations where environmental conditions, mounting arrangements and cable entry sealing have been assessed.
No. The OT400DLRR3TZ is a switch-disconnector intended for manual switching and electrical isolation. It does not replace a circuit breaker, fuse or motor overload relay, so suitable protective devices must be provided separately.
The ABB model and order code is OT400DLRR3TZ, and its manufacturer product identification number is 1SCA022340R1910. Its EAN / GTIN is 6417019116402, and it belongs to product group 311019-Metal Enclosed (Loadbreak).
ABB OT steel enclosed safety switches provide dependable high-current electrical isolation for industrial machinery and power distribution systems. The OT400DLRR3TZ combines a 400 A three-pole switching mechanism, black padlockable pistol-grip handle, IP65 galvanised steel enclosure, integrated 2NO + 1NC auxiliary contacts and flexible divided top and bottom ring-flange cable entries to support reliable manual isolation in demanding industrial environments.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.