Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SCA022284R2310 ABB 630A 3-Pole IP65 Steel Enclosed Safety Switch with Open Top and Bottom Cable Entries
ABB OT630KLAA3TZ (1SCA022284R2310) 630 A frame three-pole steel enclosed safety switch-disconnector with IP65 enclosure protection and open top and bottom cable entries. Designed for manual switching and isolation in industrial and commercial three-phase electrical installations.
£2,265.37
Why Choose the ABB OT630KLAA3TZ 630A 3-Pole IP65 Steel Enclosed Safety Switch?
The ABB OT630KLAA3TZ (1SCA022284R2310) is a heavy-duty 630 A three-pole steel enclosed safety switch-disconnector designed for dependable manual load switching and electrical isolation in industrial and commercial low-voltage installations. Part of ABB's established OT switch-disconnector range, it combines high-current switching performance with a robust steel enclosure and flexible open cable entry arrangements.
Featuring a 630 A frame designation, three-pole switching configuration and IP65 enclosure protection rating, the OT630KLAA3TZ is intended for demanding three-phase electrical distribution systems, industrial machinery supplies and high-current isolation applications. ABB's OT630 enclosed switch range includes operational switching ratings of 570 A for AC-23A duty at 415 V AC, making it important to distinguish the frame designation from the applicable load-switching rating.
The switch is housed in a durable steel sheet enclosure with a front-operated manual switching mechanism. Its three-pole configuration allows the three phase conductors to be disconnected together, providing a clearly identifiable local isolation point for maintenance, servicing and inspection.
A key feature of the OT630KLAA3TZ is its open top and bottom cable entry arrangement. The enclosure is supplied without fitted cable entry flanges, allowing compatible C-flange or ring-flange accessories to be selected according to the cable sizes and installation layout. This provides flexibility for industrial applications involving large power cables and demanding cable routing requirements.
Key Advantages
- 630 A frame designation for high-current industrial electrical installations.
- Three-pole switching mechanism enables simultaneous isolation of three phase conductors.
- 570 A AC-23A operational switching capability at 415 V AC within the applicable manufacturer ratings.
- IP65-rated steel enclosure provides protection against dust and water jets when correctly completed and installed.
- Robust steel sheet construction protects the internal switching mechanism.
- Manual switch-disconnector operation provides a clearly identifiable electrical isolation point.
- Front-operated switching arrangement supports convenient access for authorised personnel.
- Open top and bottom cable entries offer flexibility for incoming and outgoing power cable routing.
- Compatible with C-flange and ring-flange accessories selected to suit the installation.
- Suitable for large power cable installations when correctly specified accessories are fitted.
- Dedicated safety switch application supports planned electrical isolation and maintenance procedures.
- Surface-mounted enclosure provides a robust installation solution.
- Suitable for industrial and commercial power distribution where three-pole disconnection is required.
- ABB OT switch-disconnector technology designed for dependable industrial switching.
Key Features
- ABB OT enclosed switch-disconnector series.
- 630 A frame designation.
- Three-pole (3P) switching configuration.
- Manual load switching and isolation.
- 570 A AC-23A switching current at 415 V AC for the corresponding OT630 switching class.
- IP65 enclosure protection rating.
- Steel sheet enclosure.
- Front-operated switch-disconnector mechanism.
- Open top cable entry.
- Open bottom cable entry.
- Cable entry flanges selected separately.
- Compatible C-flange or ring-flange cable entry arrangements.
- Designed for three-phase industrial power circuits.
- Surface-mounted enclosed construction.
- Suitable for coordinated electrical protection systems.
- ABB product identification number 1SCA022284R2310.
- ABB order code OT630KLAA3TZ.
Technical Specifications
- Manufacturer: ABB
- Product range: OT Enclosed Switch-Disconnectors
- Model: OT630KLAA3TZ
- ABB order code: OT630KLAA3TZ
- ABB product ID: 1SCA022284R2310
- ABB product group: 311019-Metal Enclosed (Loadbreak)
- Product type: Steel enclosed safety switch-disconnector
- Frame designation: 630 A
- Number of poles: 3
- Electrical configuration: Three-pole
- Switching function: Manual load switching and electrical isolation
- OT630 switching-class AC-23A operational current at 415 V AC: 570 A
- Operating arrangement: Front operated
- Enclosure material: Steel sheet
- Enclosure protection rating: IP65
- Cable entry arrangement: Open top and bottom
- Top cable entry: Open
- Bottom cable entry: Open
- Compatible cable entry systems: C-flange or ring-flange accessories
- Cable entry flanges: Selected separately
- Mounting arrangement: Enclosed surface mounting
- Application: Industrial and commercial three-phase electrical isolation
- Neutral switching: No fourth switched pole
- Overload protection: Requires separately specified protective equipment
- Short-circuit protection: Requires separately specified protective equipment
- Applicable switch-disconnector standard: IEC 60947-3
Reliable High-Current Three-Phase Isolation
The ABB OT630KLAA3TZ is designed to provide a dedicated manual isolation point for high-current three-phase electrical installations. Its three-pole switching mechanism allows all three phase conductors to be disconnected together, supporting maintenance and servicing of industrial machinery, electrical distribution equipment and other suitable power circuits.
The distinction between frame current and rated operational switching current is important when selecting high-current switch-disconnectors. Although the OT630KLAA3TZ is identified as a 630 A model, the applicable operational current depends on the utilisation category, operating voltage and load characteristics. ABB's corresponding OT630 enclosed switch class includes a 570 A AC-23A rating at 415 V AC. The precise model-specific ratings should be checked before final circuit selection.
The IP65 steel enclosure provides a protected housing for the internal switching mechanism. When correctly assembled and sealed, IP65 protection indicates dust-tight construction and resistance to water jets. This makes the enclosed switch suitable for appropriately designed industrial environments where electrical equipment may be exposed to dust or water spray.
Because the OT630KLAA3TZ has open cable entries at both the top and bottom, the enclosure requires suitable cable entry accessories to achieve the intended ingress protection. Correctly selected flanges, cable glands, seals and mounting components are essential. Open entry apertures must not be left unsealed in an installation requiring IP65 protection.
The open-entry configuration provides flexibility where the number, size or routing of incoming and outgoing cables must be determined during installation design. Compatible C-flange or ring-flange cable entry arrangements can be selected to suit the cable installation, subject to ABB accessory compatibility and the enclosure's mechanical requirements.
The three-pole switching arrangement is particularly suitable for three-phase systems where the neutral conductor is not required to be switched. If the installation requires simultaneous neutral disconnection, a suitable four-pole or specifically configured three-pole-plus-neutral product should be selected instead.
As a switch-disconnector rather than an automatic circuit protection device, the OT630KLAA3TZ does not independently provide overload or short-circuit protection. Suitable fuses, circuit breakers or other protective devices must be installed separately and coordinated with the switch-disconnector and the electrical system's prospective fault current.
Installation and Cable Entry Considerations
The ABB OT630KLAA3TZ should be installed by competent electrical personnel in accordance with the manufacturer's instructions and applicable electrical regulations. The mounting surface must provide adequate support for the enclosure, cables and associated installation accessories.
The top and bottom open cable entry arrangement requires particular attention during installation planning. Suitable entry plates or flanges must be selected to accommodate the cable sizes and quantity while preserving the enclosure's intended IP65 protection. All unused openings must be properly sealed.
Power cable selection must take account of conductor current-carrying capacity, installation method, ambient temperature, fault withstand requirements and terminal compatibility. The cable entry arrangement must also provide suitable mechanical support and avoid excessive strain on the switch-disconnector terminals.
The switch should be positioned so that the operating mechanism is readily accessible and the ON/OFF state can be identified by authorised personnel. Adequate working clearance should be maintained for safe operation, inspection and maintenance.
Before electrical work begins, the circuit must be isolated using the appropriate procedure, secured against unintended re-energisation and verified as de-energised. The switch-disconnector should form part of the installation's wider electrical safety system rather than being relied upon as the sole safety measure.
Typical Applications
- High-current industrial three-phase isolation.
- Industrial electrical distribution systems.
- Machinery supply disconnection.
- Manufacturing and production facilities.
- Electrical plant rooms and switchrooms.
- Industrial motor feeder isolation within applicable switching ratings.
- Large pumping stations and water treatment installations.
- Industrial ventilation and extraction systems.
- Commercial and industrial building services.
- Process control and automation equipment supplies.
- Electrical sub-distribution installations.
- OEM industrial machinery and electrical assemblies.
- Applications requiring open top and bottom cable entries.
- Installations using separately configured C-flange or ring-flange cable entry accessories.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Enclosed safety switch / isolator | |
|---|---|---|
| Material | Steel |
Frequently Asked Questions
What is the ABB OT630KLAA3TZ used for?
The ABB OT630KLAA3TZ is a 630 A frame, three-pole steel enclosed safety switch-disconnector used for manual load switching and electrical isolation in suitable industrial and commercial three-phase power distribution installations.
What is the current rating of the ABB OT630KLAA3TZ?
The model has a 630 A frame designation. ABB's corresponding OT630 enclosed switch class includes a 570 A AC-23A operational switching rating at 415 V AC. The applicable rating must be checked against the specific operating voltage, utilisation category and manufacturer documentation.
How many poles does the ABB OT630KLAA3TZ have?
The switch features a three-pole (3P) configuration, allowing simultaneous disconnection of the three phase conductors. It does not include a fourth switched neutral pole.
What is the IP protection rating of the ABB OT630KLAA3TZ?
The OT630KLAA3TZ is specified with an IP65 steel enclosure. Suitable cable entry flanges, glands and seals must be fitted to the open top and bottom entry areas to maintain the intended protection rating.
What material is the ABB OT630KLAA3TZ enclosure made from?
The switch is housed in a steel enclosure designed to provide mechanical protection for the internal switch-disconnector assembly in suitable industrial and commercial environments.
What does open cable entry mean on the ABB OT630KLAA3TZ?
Open cable entry means the enclosure has open top and bottom cable entry areas that must be completed with compatible accessories. This allows the cable entry configuration to be selected according to the installation requirements.
Are cable entry flanges included with the ABB OT630KLAA3TZ?
The open-entry configuration requires separately selected compatible cable entry flanges or plates. The required accessories should be confirmed against ABB's current accessory documentation before installation.
Can the ABB OT630KLAA3TZ use C-flange or ring-flange cable entries?
ABB's open-entry enclosed switch-disconnector range supports C-flange and ring-flange cable entry arrangements. The appropriate compatible accessories must be selected according to the enclosure configuration, cable dimensions and installation requirements.
Is the ABB OT630KLAA3TZ suitable for machinery isolation?
Yes, where its electrical ratings and installation configuration are suitable. The switch can provide a manual isolation point for industrial machinery, but the complete installation must comply with the applicable electrical safety and isolation requirements.
What is the difference between the ABB OT630KLAA3TZ and OT630KLAA4BZ?
The OT630KLAA3TZ is a three-pole enclosed safety switch-disconnector, while the OT630KLAA4BZ is a four-pole enclosed switch-disconnector. Both use an open cable entry arrangement, but the number of switched poles differs. Selection depends on the electrical system and whether a fourth conductor must be switched.
Does the ABB OT630KLAA3TZ provide overload or short-circuit protection?
No. The OT630KLAA3TZ is a switch-disconnector, not a circuit breaker or fused switch. Suitable overload and short-circuit protective devices must be provided separately.
Can the ABB OT630KLAA3TZ be used in dusty industrial environments?
The IP65 enclosure classification supports use in appropriately specified dusty environments. The enclosure must be correctly assembled and all cable entry openings sealed with suitable accessories to maintain the intended ingress protection.
What should be checked before installing the ABB OT630KLAA3TZ?
Installers should verify the operational current, voltage, utilisation category, terminal capacity, cable entry accessories, enclosure mounting requirements and protective device coordination against ABB's model-specific installation documentation.
What is the ABB product identification number for the OT630KLAA3TZ?
The ABB order code is OT630KLAA3TZ, and the manufacturer product identification number is 1SCA022284R2310. The product belongs to ABB group 311019-Metal Enclosed (Loadbreak).
Dependable High-Current Safety Isolation for Industrial Electrical Systems
The ABB OT630KLAA3TZ combines a 630 A frame designation, three-pole switching mechanism, IP65 steel enclosure and flexible open top and bottom cable entry arrangement. Designed for professional industrial electrical installations, it provides a robust manual isolation solution for demanding three-phase machinery supplies and power distribution systems.
