Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OT630KBUA3T (1SCA022284R1510) 630 A three-pole steel enclosed safety switch with bottom cable entry. Designed for manual load switching and electrical isolation of appropriately rated industrial machinery, equipment and three-phase electrical distribution circuits.
£2,023.23
The ABB OT630KBUA3T, manufacturer order number 1SCA022284R1510, is a heavy-duty 630 A three-pole steel enclosed safety switch designed for manual load switching and electrical isolation in industrial installations. Part of ABB's Metal Enclosed (Loadbreak) product group, this industrial switch disconnector combines high-current switching capability with a protective steel enclosure and a dedicated bottom cable-entry arrangement.
With its 630 A current classification, the OT630KBUA3T is intended for substantial three-phase electrical installations, including industrial machinery supplies, plant distribution circuits and high-capacity equipment isolation. Its three-pole switching configuration allows the three phase conductors to be disconnected together through one operating mechanism, providing a clear and practical means of isolating appropriately rated electrical equipment.
A distinguishing feature of the ABB OT630KBUA3T safety switch is its bottom cable-entry design. This arrangement is particularly useful where power cables approach the enclosure from below, such as installations using floor-level cable routes, rising cable containment or bottom-fed industrial distribution systems. The steel enclosure provides a robust protective housing for the switching assembly, while the exact cable-entry dimensions, environmental protection rating and supplied accessories should be checked against the manufacturer's product-specific documentation.
The ABB OT630KBUA3T provides a high-current manual isolation solution for industrial electrical systems. Its three-pole switching mechanism is intended to disconnect three phase conductors together, making it relevant to machinery supplies, distribution circuits and other appropriately designed three-phase applications.
The 630 A classification identifies the switch as part of ABB's high-capacity OT630 family. However, the suitability of a particular switch disconnector cannot be established from current classification alone. Engineers must consider the actual operating voltage, load current, power factor, frequency of switching and the relevant utilisation category. Switching highly inductive motor loads, for example, may require different ratings from switching predominantly resistive loads.
The steel enclosure provides a protective housing around the switching mechanism and electrical terminations. This is valuable in industrial installations where equipment may be exposed to mechanical activity, maintenance operations or demanding operating conditions. The enclosure's precise IP rating and environmental suitability must be confirmed for the OT630KBUA3T rather than inferred from other ABB OT630 variants.
The bottom cable-entry arrangement is particularly beneficial where electrical cables approach the isolation point from below. This may include floor-level cable trays, rising conduits, cable trenches and bottom-fed electrical equipment. Correct gland selection, cable support, bending radius and termination clearances remain important for a safe and maintainable installation.
As a manual load-break switch disconnector, the OT630KBUA3T is intended to provide switching and isolation rather than automatic overload or short-circuit protection. Suitable fuses, circuit breakers or other protective devices must be provided where required by the electrical design. The switch must also be incorporated into appropriate safe-isolation procedures, including securing against reconnection and verifying absence of voltage before maintenance.
Tick the specs you need, then view products that match.
| Device Type | Enclosed safety switch / isolator | |
|---|---|---|
| Material | Steel |
The ABB OT630KBUA3T is a 630 A three-pole steel enclosed safety switch used for manual load switching and electrical isolation of appropriately rated industrial machinery and three-phase electrical equipment.
The ABB manufacturer order number is 1SCA022284R1510. The corresponding model designation is OT630KBUA3T, within product group 311019 – Metal Enclosed (Loadbreak).
The OT630KBUA3T has a 630 A current classification. The applicable operational current for a specific circuit should be checked against ABB's ratings for the operating voltage and utilisation category.
The OT630KBUA3T has three switched poles, allowing the three phase conductors of an appropriately designed electrical circuit to be disconnected together.
The OT630KBUA3T is supplied as a steel enclosed safety switch, providing a robust housing for the switch-disconnector mechanism and associated electrical connections.
The OT630KBUA3T has a bottom cable-entry arrangement. This makes it suitable for installations where power cables are routed into the enclosure from below, subject to the manufacturer's installation requirements.
The supplied product specification does not identify an IP rating for this exact model. The enclosure protection rating should be confirmed against the ABB OT630KBUA3T documentation before specifying it for a particular environment.
The OT630KBUA3T may be suitable for motor isolation where the connected equipment's voltage, current and switching duty fall within the manufacturer's published ratings. The relevant AC-23 utilisation-category rating should be checked for motor switching applications.
No. The OT630KBUA3T is a manual switch disconnector, not an automatic circuit breaker. Appropriate overload and short-circuit protection must be provided separately where required.
Confirm the operating voltage, operational current rating, utilisation category, enclosure protection, bottom cable-entry dimensions, conductor terminations, protective devices and installation clearances against the exact ABB product documentation.
The ABB OT630KBUA3T combines a 630 A current classification, three-pole manual switching, a robust steel enclosure and bottom cable-entry arrangement in a dedicated industrial safety switch. It is a practical option for electrical contractors, plant engineers, machinery manufacturers and maintenance teams specifying high-current isolation equipment for properly engineered three-phase installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.