Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SCA022280R3170 ABB 630A Class 3-Pole IP54 Steel Enclosed Manual Change-Over Switch
ABB OT630KLAA3C (1SCA022280R3170) is an OT630 frame three-pole manual I-O-II change-over switch with a 570 A AC-23A operational current rating up to 415 V AC, an IP54 steel enclosure, open top and bottom cable entries, a black pistol-type handle and included neutral and protective earth terminals.
£3,815.06
Why Choose the ABB OT630KLAA3C 630A 3-Pole IP54 Steel Enclosed Change-Over Switch?
The ABB OT630KLAA3C (ABB product ID 1SCA022280R3170) is a heavy-duty 630 A class, 3-pole steel enclosed change-over switch designed for manual selection and isolation between two electrical supplies in industrial low-voltage installations. Part of ABB's established OT enclosed switchgear range, this unit combines a robust sheet-steel enclosure, a black pistol-type operating handle, I-O-II switching positions and IP54 ingress protection.
Unlike a conventional ON/OFF switch disconnector, the OT630KLAA3C provides a three-position change-over function. Position I selects the first supply, position O provides the central OFF position, and position II selects the alternative supply. This makes the switch suitable for appropriately designed mains-to-generator changeover systems, dual-supply industrial distribution arrangements and other applications requiring manual selection between two power sources.
Although identified by its OT630 frame designation, the enclosed assembly has a catalogue operational current rating of 570 A for AC-22A duties up to 690 V AC and 570 A for AC-23A duties up to 415 V AC. These application-specific ratings are important when selecting the switch for industrial loads and should not be confused with the nominal 630 A frame designation.
The change-over assembly is housed in a substantial 1000 × 800 × 330 mm steel enclosure, with open top and bottom cable entry areas for separately selected C-flange or ring-flange accessories. It includes a black I-O-II pistol handle, neutral and protective earth terminals, providing a practical enclosed change-over solution for high-current industrial electrical installations.
Key Advantages
- Three-position I-O-II change-over operation: Selects between two supplies with a central OFF position.
- OT630 frame construction: Designed for high-current industrial change-over applications.
- 570 A AC-22A operational current: Suitable for compatible mixed resistive and inductive loads at voltages up to 690 V AC.
- 570 A AC-23A operational current: Supports compatible motor-load switching duties up to 415 V AC.
- Three mechanically linked poles: Enables simultaneous switching of three phase conductors.
- IP54 steel enclosure: Provides protection against harmful dust ingress and splashing water when correctly assembled.
- Manual supply selection: Allows operators to select between two appropriately configured electrical sources.
- Central OFF position: Provides a defined position in which neither supply is selected.
- Open top and bottom cable entries: Allow flexible selection of cable entry arrangements.
- C-flange and ring-flange compatibility: Supports different cable routing and termination requirements.
- Black pistol-type handle: Provides clear front-operated I-O-II control.
- Neutral and protective earth terminals included: Support installation in compatible three-phase systems.
- Large steel enclosure: Accommodates the change-over mechanism and associated high-current connections.
- Manual mechanical operation: Does not depend on a powered actuator for supply selection.
- ABB industrial switchgear design: Suitable for professionally engineered power distribution and source-selection systems.
Key Features
- ABB OT enclosed change-over switch series.
- Model: OT630KLAA3C.
- Three-pole change-over switching configuration.
- Three operating positions: I-O-II.
- Manual front-operated mechanism.
- 630 A nominal frame class.
- 570 A AC-22A operational current rating up to 690 V AC.
- 570 A AC-23A operational current rating up to 415 V AC.
- IP54 ingress protection.
- Sheet-steel enclosure.
- Black pistol-type change-over handle.
- I-O-II position indication.
- Open top and bottom cable entry arrangement.
- Compatible with separately ordered C-flange or ring-flange cable entry accessories.
- Connection bars for parallel connections ordered separately.
- Neutral terminal included.
- Protective earth terminals included.
- 1000 × 800 × 330 mm enclosure dimensions.
- 48 kg catalogue unit weight.
- Mechanical supply selection rather than automatic transfer operation.
- Designed for industrial low-voltage electrical distribution applications.
Technical Specifications
- Manufacturer: ABB
- Series: OT Enclosed Change-Over Switches
- Model: OT630KLAA3C
- ABB order code: OT630KLAA3C
- ABB product ID: 1SCA022280R3170
- Product group: 311019 – Metal Enclosed (Loadbreak)
- Product description: Enclosed change-over switch
- Product type: Steel enclosed manual load-break change-over switch
- Frame designation: OT630
- Nominal frame class: 630 A
- Number of poles: 3
- Switching function: Manual change-over between two electrical supplies
- Operating positions: I-O-II
- Operating arrangement: Front operated
- Operating mechanism: Manual
- Handle type: Pistol-type handle
- Handle colour: Black
- Enclosure material: Sheet steel
- Ingress protection: IP54
- Rated operational current AC-22A up to 690 V AC: 570 A
- Rated operational current AC-23A up to 415 V AC: 570 A
- Supply selection: Source I / OFF / Source II
- Change-over operation: Manually operated, with a central OFF position
- Cable entry configuration: Open top and bottom
- Cable entry outlets: Open entry areas
- Compatible cable entry accessories: C-flanges or ring-flanges
- Cable entry flanges supplied: No
- Connection bars for parallel connections: Ordered separately
- Cable entry fixing arrangement: Entry components also form part of the enclosure fixing arrangement
- Neutral terminal: Included
- Protective earth terminals: Included
- Enclosure height: 1000 mm
- Enclosure width: 800 mm
- Enclosure depth: 330 mm
- Catalogue unit weight: 48 kg
- Country of origin: Finland
- GTIN / EAN: 6417019065694
- Replacement product reference: OT630KLAA3CZ
- Product lifecycle information: ABB identifies the original model as superseded by an IP65 replacement version
- Relevant product standard: IEC 60947-3
- Ingress protection classification: IEC 60529
Reliable High-Current Manual Change-Over Switching for Industrial Power Systems
The ABB OT630KLAA3C is designed for industrial electrical systems requiring controlled manual selection between two power sources. Its three-position change-over mechanism allows an operator to select supply I, move to the central OFF position, or select supply II. This arrangement is particularly useful where an electrical installation requires a defined means of selecting between a normal supply and an alternative source.
Unlike a standard switch disconnector, which provides ON/OFF isolation of one supply, a change-over switch incorporates a source-selection function. In a correctly designed installation, the OT630KLAA3C can be used to connect a common load to one of two alternative supplies. Its central OFF position provides an intermediate state in which neither source is selected.
The switch belongs to ABB's OT630 frame family, but the manufacturer's enclosed change-over catalogue specifies 570 A operational current for AC-22A applications up to 690 V AC and 570 A for AC-23A applications up to 415 V AC. The correct utilisation category and operational current must be considered when determining suitability for industrial motors, mixed loads and electrical distribution circuits.
The IP54 sheet-steel enclosure provides a robust protective housing for the change-over switching mechanism. Its IP54 classification indicates protection against harmful dust ingress and splashing water. The completed installation must retain the required sealing around cable entries, flanges and enclosure fittings.
A significant feature of the OT630KLAA3C is its open top and bottom cable entry configuration. The assembly is delivered without cable entry flanges, allowing suitable C-flange or ring-flange accessories to be selected according to the installation. This provides flexibility when routing large power cables from two incoming supplies and an outgoing load connection.
The cable entry components are also associated with the enclosure's fixing arrangement. Installers must therefore select the necessary mounting and entry accessories together, following ABB's instructions for the particular installation. Connection bars for parallel cable arrangements are ordered separately where required.
The black pistol-type handle provides clear I-O-II indication and manual control from the front of the enclosure. The three-position arrangement supports deliberate operator selection between supplies, while the central OFF position allows both sources to be disconnected from the common load through the change-over mechanism.
The assembly includes neutral and protective earth terminals. Its three main poles switch three conductors; the presence of a neutral terminal does not make the device a four-pole change-over switch. Applications requiring switched-neutral source transfer should use an appropriately specified four-pole change-over arrangement.
The OT630KLAA3C is a manual change-over switch, not an automatic transfer switch. It does not independently detect supply failure or automatically initiate generator starting and source transfer. Where automatic operation is required, a suitable automatic transfer switching system and associated control equipment must be specified.
As a load-break change-over switch, the OT630KLAA3C also does not replace the need for correctly selected overload and short-circuit protective devices. Source protection, fault levels, earthing arrangements and any requirements relating to neutral switching must be considered as part of the overall electrical design.
Typical Applications
- Manual mains-to-generator change-over systems.
- Industrial dual-supply electrical distribution.
- Manual selection between normal and alternative electrical supplies.
- Industrial standby power arrangements.
- Manufacturing plants and production facilities.
- Industrial power distribution boards.
- Three-phase source-selection installations.
- Commercial and industrial backup power systems.
- Critical machinery requiring a manually selectable alternative supply.
- Industrial pumping stations and process facilities.
- Large ventilation and HVAC installations.
- Infrastructure electrical distribution systems.
- Maintenance and service supply selection.
- Industrial control and distribution assemblies.
- OEM electrical equipment and power-system integration.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Enclosed changeover switch | |
|---|---|---|
| Material | Steel |
Frequently Asked Questions
What is the ABB OT630KLAA3C used for?
The ABB OT630KLAA3C is a three-pole, steel enclosed manual change-over switch used to select between two electrical supplies in industrial low-voltage installations. Typical applications include mains-to-generator changeover and dual-supply distribution systems.
Is the ABB OT630KLAA3C a 630A switch?
The OT630KLAA3C belongs to ABB's OT630 nominal frame class. However, the enclosed change-over assembly has a catalogue operational current rating of 570 A for AC-22A duties up to 690 V AC and 570 A for AC-23A duties up to 415 V AC.
What is the rated operational current of the ABB OT630KLAA3C?
ABB specifies 570 A for AC-22A applications up to 690 V AC and 570 A for AC-23A applications up to 415 V AC. The appropriate rating depends on the connected load and switching duty.
What does I-O-II mean on the ABB OT630KLAA3C?
I-O-II identifies the three change-over positions. Position I selects the first supply, position O is the central OFF position, and position II selects the alternative supply.
How many poles does the ABB OT630KLAA3C have?
The OT630KLAA3C has 3 switching poles for simultaneous switching of three conductors. It also includes a separate neutral terminal and protective earth terminals.
What is the IP rating of the ABB OT630KLAA3C?
The OT630KLAA3C has an IP54 ingress protection rating, providing protection against harmful dust ingress and splashing water when the enclosure is correctly assembled with suitable cable entry accessories.
What material is the ABB OT630KLAA3C enclosure made from?
The enclosure is manufactured from sheet steel, providing a robust protective housing for the industrial change-over switching mechanism.
Does the ABB OT630KLAA3C have open cable entries?
Yes. The OT630KLAA3C is supplied with open top and bottom cable entry areas. Suitable cable entry flanges and associated accessories must be selected separately.
Which cable entry accessories are suitable for the ABB OT630KLAA3C?
The enclosure is designed for C-flange or ring-flange cable entry arrangements. The appropriate accessories should be selected according to the cable sizes, entry positions and mounting requirements.
Are cable entry flanges included with the ABB OT630KLAA3C?
No. The OT630KLAA3C is supplied without cable entry flanges. Compatible flanges and connection bars for parallel connections must be ordered separately where required.
What type of handle does the ABB OT630KLAA3C have?
The switch includes a black pistol-type operating handle with I-O-II position indication for manual selection between two supplies and the central OFF position.
Does the ABB OT630KLAA3C include neutral and earth terminals?
Yes. The OT630KLAA3C includes neutral and protective earth terminals. Its three main poles provide three-conductor switching; the neutral terminal is not a fourth switching pole.
What are the dimensions and weight of the ABB OT630KLAA3C?
The steel enclosure measures 1000 mm high × 800 mm wide × 330 mm deep. ABB's ordering catalogue lists a unit weight of 48 kg.
Can the ABB OT630KLAA3C be used for generator changeover?
Yes. The OT630KLAA3C can be used in a properly designed manual mains-to-generator change-over installation, provided the electrical ratings, source arrangements, earthing system and protective devices are suitable.
Is the ABB OT630KLAA3C an automatic transfer switch?
No. The OT630KLAA3C is a manually operated change-over switch. It does not automatically detect a supply failure or transfer the load between sources without operator action.
What is the difference between ABB OT630KLAA3B and OT630KLAA3C?
The OT630KLAA3B is a three-pole ON/OFF switch disconnector for isolating a single supply, whereas the OT630KLAA3C is a three-pole I-O-II change-over switch for selecting between two supplies. The change-over version also uses a larger enclosure.
Does the ABB OT630KLAA3C provide overload or short-circuit protection?
No. The OT630KLAA3C provides manual load switching and source selection. Suitable overload and short-circuit protective devices must be installed separately according to the electrical system design.
Has the ABB OT630KLAA3C been replaced by another model?
ABB's product information identifies OT630KLAA3CZ as the replacement reference for the original OT630KLAA3C and indicates that the original model was superseded by an IP65 version. Replacement suitability and availability should be checked against the required installation specification.
Trusted by Industrial Electrical and Machinery Professionals
ABB OT enclosed change-over switches provide a practical means of manual supply selection for industrial electrical distribution systems. With its OT630 frame, three-pole I-O-II switching arrangement, 570 A catalogue operational current rating, IP54 steel enclosure, black pistol-type handle and flexible open cable entry configuration, the OT630KLAA3C is suited to professionally engineered industrial standby power, dual-supply and maintenance change-over applications.
