Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SCA022280R0310 ABB 630A Class 3-Pole IP54 Steel Enclosed Switch Disconnector with Open Cable Entries
ABB OT630KLAA3B (1SCA022280R0310) is an OT630 frame three-pole steel enclosed switch disconnector with a 570 A AC-23A operational current rating up to 415 V AC, IP54 protection, a black pistol-type operating handle, open top and bottom cable entries and included neutral and protective earth terminals.
£2,001.69
Why Choose the ABB OT630KLAA3B 630A 3-Pole IP54 Steel Enclosed Switch Disconnector?
The ABB OT630KLAA3B (ABB product ID 1SCA022280R0310) is a heavy-duty 630 A class, 3-pole steel enclosed switch disconnector designed for manual load switching and electrical isolation in industrial low-voltage installations. Part of the ABB OT enclosed switch-disconnector range, it combines a robust sheet-steel enclosure, black pistol-type operating handle, open top and bottom cable entry arrangements and IP54 ingress protection.
The OT630KLAA3B is designed for high-current industrial distribution and machinery isolation applications. ABB's enclosed switch-disconnector catalogue identifies the model as an OT630 frame with a listed 570 A operational current rating under AC-22A duties up to 690 V AC and AC-23A duties up to 415 V AC. The distinction between the 630 A frame designation and the catalogue's operational current rating is important when selecting the switch for a particular installation.
Housed in a substantial 1000 × 400 × 230 mm steel enclosure, the OT630KLAA3B is supplied with open top and bottom cable entry areas rather than pre-fitted cable glands or entry flanges. Compatible C-flange or ring-flange cable entry accessories must be ordered separately. The assembly includes a black pistol-type handle, neutral terminal and protective earth terminals, providing a practical enclosed isolation solution for industrial machinery, power distribution and maintenance switching.
Key Advantages
- ABB OT630 switch-disconnector frame for high-current industrial isolation applications.
- Three-pole switching configuration enables simultaneous disconnection of three phase conductors.
- 570 A AC-23A operational current rating up to 415 V AC according to ABB's enclosed switch-disconnector ordering data.
- 570 A AC-22A operational current rating up to 690 V AC for compatible load-switching duties.
- IP54 steel enclosure provides protection against dust ingress and splashing water when correctly assembled.
- Open top and bottom cable entries provide flexibility when selecting suitable power cable entry arrangements.
- Compatible C-flange and ring-flange accessories support different cable installation requirements.
- Black pistol-type operating handle provides clear manual ON/OFF switching.
- Enclosed construction separates the switching mechanism and live connections from normal external contact.
- Neutral and protective earth terminals included for convenient electrical installation.
- 1000 × 400 × 230 mm enclosure provides substantial space for the switching assembly and cable connections.
- 30 kg catalogue weight reflects the heavy-duty enclosed construction.
- ABB OT switching technology supports dependable manual load-break operation and electrical isolation.
- Suitable for industrial distribution systems, machinery isolation and maintenance disconnecting points.
Key Features
- ABB OT enclosed switch-disconnector series.
- OT630 frame designation.
- Three-pole, front-operated switch-disconnector configuration.
- 570 A AC-22A operational current rating up to 690 V AC.
- 570 A AC-23A operational current rating up to 415 V AC.
- IP54 enclosure protection.
- Sheet-steel enclosure construction.
- Black pistol-type manual operating handle.
- I-O / ON-OFF operating indication.
- Open top and bottom cable entry arrangement.
- C-flange or ring-flange cable entry compatibility.
- Cable entry accessories ordered separately.
- Entry fixing profiles also used for enclosure mounting.
- Neutral terminal included.
- Protective earth terminals included.
- Manual load-break switching and isolation.
- 1000 mm enclosure height for high-current industrial applications.
- 400 mm enclosure width.
- 230 mm enclosure depth.
- 30 kg catalogue unit weight.
- Designed for integration into appropriately protected industrial electrical installations.
Technical Specifications
- Manufacturer: ABB
- Series: OT Enclosed Switch Disconnectors
- Model: OT630KLAA3B
- ABB order code: OT630KLAA3B
- ABB product ID: 1SCA022280R0310
- Product group: 311019 – Metal Enclosed (Loadbreak)
- Product type: Steel enclosed load-break switch disconnector
- Frame designation: OT630
- Nominal frame class: 630 A
- Number of poles: 3
- Operating arrangement: Front operated
- Operating mechanism: Manual
- Operating positions: I-O / ON-OFF
- Handle type: Pistol-type handle
- Handle colour: Black
- Enclosure material: Sheet steel
- Ingress protection: IP54
- Rated operational current AC-22A up to 690 V AC: 570 A
- Rated operational current AC-23A up to 415 V AC: 570 A
- Switching function: Manual load-break switching and electrical isolation
- Cable entry configuration: Open top and bottom
- Cable entry type: Open entry areas for separately ordered flanges
- Compatible cable entry accessories: C-flanges or ring-flanges
- Cable entry flanges included: No
- Cable entry fixing arrangement: Entry accessories and fixing profiles selected separately
- Neutral terminal: Included
- Protective earth terminals: Included
- Enclosure height: 1000 mm
- Enclosure width: 400 mm
- Enclosure depth: 230 mm
- Catalogue unit weight: 30 kg
- Mounting arrangement: Enclosed installation using the specified fixing arrangement
- Equipment category: Low-voltage switch-disconnector
- Applicable switch-disconnector standard: IEC 60947-3
- Ingress protection classification: IEC 60529
Reliable High-Current Industrial Isolation with Open Cable Entry Arrangements
The ABB OT630KLAA3B provides a dependable means of manually disconnecting industrial electrical equipment from its power supply. Its three-pole switching mechanism allows simultaneous disconnection of three phase conductors, making it suitable for industrial machinery, electrical distribution and local maintenance isolation applications.
The model belongs to ABB's OT630 switch-disconnector family. Although the frame designation is associated with the 630 A class, ABB's enclosed switch-disconnector ordering catalogue specifies 570 A for AC-23A operation up to 415 V AC and 570 A for AC-22A operation up to 690 V AC. These enclosed operational ratings should be considered when selecting the switch, rather than assuming that the frame designation alone determines its permissible switching current.
The IP54 sheet-steel enclosure provides robust mechanical protection for the switching assembly. An IP54 classification indicates protection against harmful dust ingress and splashing water from any direction when the enclosure is correctly assembled. It should not be confused with IP65 protection, which provides a higher level of dust and water-jet resistance.
A distinguishing feature of the OT630KLAA3B is its open top and bottom cable entry arrangement. The enclosure is supplied without fitted cable entry plates or flanges. Installers can select compatible C-flange or ring-flange accessories to suit the required cable gland arrangement and conductor routing. These accessories must be ordered separately.
The cable entry arrangement is also important for mechanical installation because the entry fixing profiles are used for mounting the enclosed switch assembly. Installers should therefore select the required cable entry components and mounting accessories together, following ABB's instructions for the specific enclosure and installation conditions.
The black pistol-type operating handle provides clear ON/OFF switching and convenient front operation. Its manual mechanism allows the connected electrical equipment to be disconnected without opening the enclosure. Appropriate isolation, verification and locking procedures must be followed before maintenance work begins.
The assembly includes neutral and protective earth terminals for electrical installation. The three main switching poles are intended for three-phase conductor disconnection; the included neutral terminal does not make this a four-pole switch. Where switched-neutral isolation is required, an appropriately rated four-pole model should be selected.
As a switch disconnector, the OT630KLAA3B provides manual load switching and isolation rather than automatic overload or short-circuit protection. Suitable protective devices must be selected separately according to the installation's fault level, load characteristics and applicable electrical standards.
Typical Applications
- High-current industrial electrical isolation.
- Three-phase industrial machinery disconnecting points.
- Industrial low-voltage distribution systems.
- Electrical installations using OT630 frame switch disconnectors.
- Manufacturing plants and production equipment.
- Industrial motor circuits requiring local isolation.
- Large pumps and pumping stations.
- Industrial ventilation and HVAC plant.
- Compressors and heavy industrial machinery.
- Conveyor and material handling systems.
- Industrial processing and packaging equipment.
- Maintenance isolation for industrial electrical equipment.
- Installations requiring C-flange or ring-flange cable entries.
- Industrial electrical distribution assemblies.
- OEM machinery and electrical equipment manufacturing.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Enclosed switch disconnector | |
|---|---|---|
| Material | Steel |
Frequently Asked Questions
What is the ABB OT630KLAA3B used for?
The ABB OT630KLAA3B is a three-pole steel enclosed switch disconnector designed for manual load switching and electrical isolation of industrial machinery, power distribution equipment and other compatible low-voltage installations.
Is the ABB OT630KLAA3B a 630A switch?
The OT630KLAA3B belongs to ABB's OT630 frame family. However, ABB's enclosed switch-disconnector ordering catalogue lists a 570 A AC-23A operational current rating up to 415 V AC and a 570 A AC-22A operational current rating up to 690 V AC. The appropriate operational rating must be used for equipment selection.
What is the rated operational current of the ABB OT630KLAA3B?
ABB's enclosed switch-disconnector catalogue lists 570 A for AC-23A switching duties up to 415 V AC and 570 A for AC-22A duties up to 690 V AC.
How many poles does the ABB OT630KLAA3B have?
The OT630KLAA3B has 3 switching poles for simultaneous disconnection of three phase conductors. A neutral terminal is included, but the neutral is not switched by the three main poles.
What is the IP rating of the ABB OT630KLAA3B?
The OT630KLAA3B has an IP54 ingress protection rating. When correctly assembled with suitable cable entry accessories, it provides protection against harmful dust ingress and splashing water.
What material is the ABB OT630KLAA3B enclosure made from?
The enclosure is manufactured from sheet steel, providing a robust protective housing for industrial electrical switching and isolation applications.
Does the ABB OT630KLAA3B have open cable entries?
Yes. The OT630KLAA3B is supplied with open top and bottom cable entry areas. Compatible cable entry plates and flanges must be ordered separately.
Which cable entry accessories are compatible with the ABB OT630KLAA3B?
The enclosure is designed for C-flange or ring-flange cable entry arrangements. The appropriate accessories must be selected according to the required cable sizes, routing and mounting arrangement.
Are cable entry flanges included with the ABB OT630KLAA3B?
No. ABB specifies that the OT630KLAA3B is delivered without cable entry flanges. Suitable cable entry accessories and flanges must be ordered separately.
What type of operating handle does the ABB OT630KLAA3B have?
The switch is supplied with a black pistol-type operating handle featuring I-O / ON-OFF indication for straightforward manual switching and isolation.
Does the ABB OT630KLAA3B include neutral and earth terminals?
Yes. The OT630KLAA3B is supplied with neutral and protective earth terminals. Its three main switching poles are intended for three-phase conductor isolation.
What are the dimensions of the ABB OT630KLAA3B?
The steel enclosure measures 1000 mm high × 400 mm wide × 230 mm deep.
How much does the ABB OT630KLAA3B weigh?
ABB's enclosed switch-disconnector ordering catalogue lists a unit weight of 30 kg for the OT630KLAA3B.
What is the difference between IP54 and IP65 protection?
IP54 provides protection against harmful dust ingress and splashing water, while IP65 provides dust-tight protection and resistance to water jets. The ABB OT630KLAA3B is specified as IP54, not IP65.
Does the ABB OT630KLAA3B provide overload or short-circuit protection?
No. The OT630KLAA3B is a switch disconnector designed for manual load switching and electrical isolation. Suitable overload and short-circuit protective devices must be provided separately where required.
What is the ABB order code for the OT630KLAA3B?
The ABB manufacturer order code is OT630KLAA3B, and the corresponding ABB product ID is 1SCA022280R0310.
Trusted by Industrial Electrical and Machinery Professionals
ABB OT enclosed switch disconnectors provide robust manual isolation for industrial machinery and low-voltage electrical distribution installations. With its OT630 frame designation, three-pole switching arrangement, IP54 sheet-steel enclosure, black pistol-type handle, open top and bottom cable entries and included neutral and protective earth terminals, the OT630KLAA3B offers a practical high-current isolation solution for electrical contractors, machinery manufacturers and industrial maintenance engineers.
