Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB S-ARC1 M C6 (2CSA275901R9064) arc fault detection device with integrated MCB: 1P+N, C curve, 6 A, 10 kA breaking capacity.
£162.72
The ABB S-ARC1 M C6 is a compact and reliable arc fault detection device (AFDD) with integrated miniature circuit breaker (MCB) designed to protect low-voltage electrical circuits against dangerous arc faults, overloads and short circuits. As part of the ABB S-ARC1 M series, it combines arc fault detection with conventional overcurrent protection in a space-saving two-module device for residential and commercial electrical installations.
The S-ARC1 M C6 provides protection against series arc faults, parallel arc faults and earth arc faults, helping address electrical fault conditions that conventional overcurrent protection alone may not detect. Its integrated thermal-magnetic MCB also provides overload and short-circuit protection, combining multiple protective functions within a single DIN rail device.
With a rated current of 6 A, a C tripping characteristic and a 10 kA rated short-circuit breaking capacity, the S-ARC1 M C6 is well suited to lower-current circuits where moderate starting or inrush currents may occur. It operates at 230–240 V AC and uses a compact 1P+N configuration occupying only two modules within the distribution board.
Arc faults can develop as a result of damaged conductors, deteriorated insulation, loose electrical connections and other installation faults. Because some dangerous arcing conditions may not draw sufficient current to operate conventional overcurrent protection, an AFDD monitors the circuit for electrical characteristics associated with hazardous arcs and disconnects the affected circuit when required.
The ABB S-ARC1 M series combines arc fault detection technology with an integrated miniature circuit breaker. The S-ARC1 M C6 therefore provides protection against series, parallel and earth arc faults as well as overloads and short circuits within a compact two-module enclosure, helping simplify modern electrical distribution-board design while providing enhanced circuit protection.
Tick the specs you need, then view products that match.
| Device Type | AFDD | |
|---|---|---|
| Poles | 1-pole + N | |
| Current | 6 A | |
| Trip Curve | C curve | |
| Breaking Capacity | 10 kA | |
| Phase | Single Phase | |
| Manufacturer | ABB | |
| Series | S-ARC1 M | |
| Model | S-ARC1 M C6 | |
| Order code | 2CSA275901R9064 | |
| EAN | 8012542339816 | |
| Product type | Arc fault detection device (AFDD) with integrated MCB | |
| Rated current | 6 A | |
| Tripping characteristic | C | |
| Rated operating voltage | 230–240 V AC | |
| Rated frequency | 50–60 Hz | |
| Number of poles | 1P+N | |
| Rated short-circuit breaking capacity | 10 kA | |
| Rated insulation voltage | 500 V | |
| Rated impulse withstand voltage | 4 kV | |
| Standards | IEC/EN 62606, IEC/EN 60898-1 | |
| Mounting type | DIN rail mounting | |
| Terminal type | Screw terminals | |
| Terminal tightening torque | 2.8 N·m | |
| Terminal protection rating | IP20 | |
| Housing protection rating | IP40 | |
| Pollution degree | 2 | |
| Width | 2 modules / 35 mm | |
| Dimensions (H × W × D) | 85 × 35 × 69 mm | |
| Weight | 0.18 kg |
The ABB S-ARC1 M C6 is used to protect low-voltage electrical circuits against series, parallel and earth arc faults, overloads and short circuits in residential and commercial electrical installations.
The device has a rated current of 6 A and uses a C tripping characteristic, making it suitable for lower-current circuits where moderate starting or inrush currents may occur.
The ABB S-ARC1 M C6 has a rated short-circuit breaking capacity of 10 kA.
Yes. The S-ARC1 M C6 combines an arc fault detection device (AFDD) with an integrated miniature circuit breaker (MCB), providing arc fault detection together with overload and short-circuit protection.
The device is designed for DIN rail mounting and occupies two modules, with an overall width of 35 mm.
ABB S-ARC1 M arc fault detection devices combine advanced arc fault monitoring with proven miniature circuit breaker technology, providing compact protection against arc faults, overloads and short circuits in modern low-voltage electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.