Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB S-ARC1 M B10 (2CSA275901R9105) arc fault detection device with integrated MCB: 1P+N, B curve, 10 A, 10 kA breaking capacity.
£162.72
The ABB S-ARC1 M B10 is a compact arc fault detection device (AFDD) with integrated miniature circuit breaker (MCB) designed to provide enhanced protection for single-phase final circuits. Part of the ABB S-ARC1 M series, it combines arc fault detection with thermal-magnetic overload and short-circuit protection within a single two-module DIN rail device.
The S-ARC1 M is designed to protect end-user single-phase circuits against earth, parallel and series arc faults as well as overloads and short-circuit currents. This allows the device to detect potentially hazardous electrical arcing that conventional MCB protection alone is not designed to identify, helping reduce the risk associated with electrically initiated fires.
With a rated current of 10 A, a B tripping characteristic and a rated operational voltage of 230–240 V AC, the S-ARC1 M B10 provides a 7.5 kA rated service short-circuit breaking capacity and a 10 kA rated ultimate short-circuit breaking capacity. Its 1P+N configuration and compact construction make it suitable for compatible residential and commercial final circuits requiring high short-circuit performance.
Arc fault detection devices monitor electrical circuits for characteristics associated with potentially dangerous electrical arcing. The ABB S-ARC1 M is designed to protect end-user single-phase circuits against earth, parallel and series arc faults, while its integrated miniature circuit breaker provides thermal-magnetic protection against overloads and short-circuit currents.
The S-ARC1 M range provides enhanced short-circuit performance compared with the standard S-ARC1 range, with the S-ARC1 M B10 providing a 10 kA ultimate short-circuit breaking capacity. Combining AFDD and MCB functionality within a compact two-module device helps simplify distribution board design while providing protection against electrical faults that conventional MCBs alone are not designed to detect.
Tick the specs you need, then view products that match.
| Device Type | AFDD | |
|---|---|---|
| Poles | 1-pole + N | |
| Current | 10 A | |
| Trip Curve | B curve | |
| Breaking Capacity | 10 kA | |
| Phase | Single Phase | |
| Manufacturer | ABB | |
| Series | S-ARC1 M | |
| Model | S-ARC1 M B10 | |
| Order code / MPN | 2CSA275901R9105 | |
| EAN | 8012542342113 | |
| Product type | Arc fault detection device with integrated MCB | |
| Rated current | 10 A | |
| Tripping characteristic | B | |
| Rated operational voltage | 230–240 V AC | |
| Rated frequency | 50–60 Hz | |
| Number of poles | 1P+N | |
| Number of protected poles | 1 | |
| Rated service short-circuit breaking capacity (Ics) | 7.5 kA | |
| Rated ultimate short-circuit breaking capacity (Icu) | 10 kA | |
| Rated insulation voltage (Ui) | 500 V | |
| Rated impulse withstand voltage (Uimp) | 4 kV | |
| Power loss | 2 W | |
| Protection rating | IP20 terminals / IP40 housing | |
| Pollution degree | 2 | |
| Operating temperature | -25 to +55 °C | |
| Contact position indication | Red ON / green OFF | |
| Tripping mechanism | Thermal-magnetic | |
| Actuator type | Toggle, orange RAL 2004, sealable in ON/OFF positions | |
| Mounting type | DIN rail | |
| Terminal type | Screw terminals | |
| Tightening torque | 2.8 N·m | |
| Modular width | 2 modules | |
| Dimensions (H × W × D) | 85 × 35 × 69 mm | |
| Weight | 180 g | |
| Standards | IEC/EN 62606, IEC/EN 60898-1 |
The ABB S-ARC1 M B10 is designed to protect compatible single-phase final circuits against earth, parallel and series arc faults, overloads and short circuits using an integrated AFDD and miniature circuit breaker.
The S-ARC1 M B10 has a rated current of 10 A and uses a B tripping characteristic, making it suitable for compatible circuits with relatively low starting or inrush currents.
No. The S-ARC1 M B10 combines an arc fault detection device with an MCB. Where residual current protection is required, suitable additional residual current protection must be provided in accordance with the applicable electrical installation requirements.
The S-ARC1 M B10 has a rated operational voltage of 230–240 V AC and a rated frequency of 50–60 Hz for compatible single-phase electrical circuits.
The S-ARC1 M B10 has a 7.5 kA rated service short-circuit breaking capacity (Ics) and a 10 kA rated ultimate short-circuit breaking capacity (Icu).
ABB S-ARC1 M devices combine arc fault detection with thermal-magnetic overcurrent protection and high short-circuit performance in a compact DIN rail format, providing enhanced protection against electrical arcing, overloads and short circuits in residential and commercial installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.