Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Lovato P1RE1NC32A030 is a 1P+N Type A RCBO rated at 32 A with a C tripping curve, 30 mA residual current sensitivity and 10 kA short-circuit rating for combined overcurrent and residual current protection.
£89.75
The Lovato P1RE1NC32A030 is a compact and reliable residual current circuit breaker with overcurrent protection (RCBO) designed to provide combined protection against overloads, short circuits and residual earth leakage currents in low-voltage electrical installations. As part of the Lovato P1RE series, it combines overcurrent and residual current protection within a single modular protective device.
Featuring a 1P+N configuration, 32 A rated current, C tripping curve and 30 mA rated residual current, the P1RE1NC32A030 provides comprehensive protection for suitable single-phase circuits. Its Type A residual current characteristic enables detection of sinusoidal AC residual currents and pulsating DC residual currents.
The P1RE1NC32A030 operates at a rated voltage of 230 V AC and provides a 10 kA short-circuit rating. Its compact 2-module construction and standard 35 mm DIN rail mounting enable straightforward integration into distribution boards, control panels and other low-voltage electrical protection systems.
RCBOs combine the functions of a miniature circuit breaker and residual current protection within a single modular device. The Lovato P1RE1NC32A030 therefore protects its connected circuit against overload and short-circuit conditions while also detecting residual currents associated with insulation faults or leakage to earth.
The Type A characteristic enables the RCBO to respond to sinusoidal AC and pulsating DC residual currents, while the C-curve overcurrent characteristic is suitable for circuits with moderate starting or inrush currents. With its 30 mA residual current sensitivity, the P1RE1NC32A030 can provide additional protection against electric shock when correctly selected and installed in accordance with applicable electrical installation requirements.
Tick the specs you need, then view products that match.
| Phase | Single Phase | |
|---|---|---|
| Poles | 1-pole + N | |
| Device Type | RCBO | |
| Trip Curve | C curve | |
| Residual Current | 30 mA | |
| RCD Type | Type A | |
| HS Code | 85362010 | |
| Manufacturer | Lovato Electric | |
| Series | P1RE | |
| Model | P1RE1NC32A030 | |
| Product type | Residual current circuit breaker with overcurrent protection (RCBO) | |
| Compliance | IEC | |
| Standard | IEC/EN/BS 61009-1 | |
| Number of poles | 1P+N | |
| Number of DIN modules | 2 | |
| Rated current | 32 A | |
| Tripping curve | C | |
| Residual current type | Type A | |
| Rated residual current IΔn | 30 mA | |
| Rated operational voltage | 230 V AC | |
| Rated insulation voltage Ui | 400 V | |
| Rated impulse withstand voltage Uimp | 4 kV | |
| Rated frequency | 50/60 Hz | |
| Short-circuit rating | 10 kA | |
| Protection rating | IP20 frontal | |
| Pollution degree | 2 | |
| Mounting type | 35 mm DIN rail | |
| Conductor capacity | 1–16 mm² | |
| Maximum terminal tightening torque | 2 Nm | |
| Electrical life | 10,000 cycles | |
| Mechanical life | 20,000 cycles | |
| Operating temperature | -25 to +60 °C | |
| Storage temperature | -40 to +80 °C | |
| Maximum operating altitude | 2,000 m | |
| Dimensions (H × W × D) | 81 × 36 × 73.5 mm | |
| Weight | 205 g |
The P1RE1NC32A030 is an RCBO designed to provide combined overload, short-circuit and residual current protection for compatible low-voltage electrical circuits.
The Lovato P1RE1NC32A030 has a rated current of 32 A and uses a C tripping curve.
The P1RE1NC32A030 has a rated residual operating current IΔn of 30 mA.
Yes. It has a Type A residual current characteristic, enabling detection of sinusoidal AC and pulsating DC residual currents.
The P1RE1NC32A030 has a 10 kA short-circuit rating and is rated for operation at 230 V AC.
The RCBO occupies 2 DIN modules and is designed for mounting on a standard 35 mm DIN rail in compatible electrical distribution boards and control panels.
Lovato Electric circuit protection devices provide practical solutions for industrial, commercial and electrical distribution applications where dependable overcurrent and residual current protection, compact DIN rail mounting and straightforward panel integration are required.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.