Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Lovato P1RB1NC32AC300 residual current circuit breaker with overcurrent protection, featuring a 1P+N configuration, 32 A rated current, C tripping characteristic, Type AC 300 mA residual current protection and 10 kA short-circuit rating.
The Lovato P1RB1NC32AC300 is a compact and reliable residual current circuit breaker with overcurrent protection (RCBO) designed to protect electrical circuits against overloads, short circuits and earth leakage faults. Part of the Lovato Electric P1RB series, it combines overcurrent and residual current protection within a single modular device.
By integrating the functions of a miniature circuit breaker and residual current device, the P1RB1NC32AC300 helps simplify distribution board layouts, reduce installation time and conserve valuable DIN rail space. Its 1P+N configuration provides protection for the phase conductor while allowing the neutral conductor to be switched simultaneously.
With a rated current of 32 A, a C tripping characteristic, Type AC residual current detection and a rated residual operating current of 300 mA, this RCBO is suitable for equipment, circuit and fire-risk protection applications. Its 10 kA short-circuit breaking capacity provides dependable fault interruption in commercial and industrial electrical installations.
The Lovato P1RB1NC32AC300 combines thermal-magnetic overcurrent protection with residual current monitoring. It disconnects the protected circuit when an overload, short circuit or qualifying AC earth leakage fault is detected, helping protect wiring, connected equipment and the wider electrical installation.
Its 300 mA residual current sensitivity is generally selected for equipment protection, insulation fault monitoring and reducing risks associated with earth leakage and electrical fires. It is not normally used as a substitute for a 30 mA device where additional personal protection is required.
Tick the specs you need, then view products that match.
| Current | 32 A | |
|---|---|---|
| Phase | Single Phase | |
| Poles | 1-pole + N | |
| Device Type | RCBO | |
| Trip Curve | C curve | |
| Residual Current | 300 mA | |
| RCD Type | Type AC | |
| Manufacturer | Lovato Electric | |
| Series | P1RB | |
| Model | P1RB1NC32AC300 | |
| Product type | Residual current circuit breaker with overcurrent protection | |
| Product abbreviation | RCBO | |
| Pole configuration | 1P+N | |
| Number of DIN modules | 2 | |
| Rated current | 32 A | |
| Tripping characteristic | C curve | |
| Residual current characteristic | Type AC | |
| Rated residual current | 300 mA | |
| Rated operational voltage | 230 V AC | |
| Rated insulation voltage | 400 V | |
| Rated impulse withstand voltage | 4 kV | |
| Rated frequency | 50 / 60 Hz | |
| Short-circuit rating | 10 kA | |
| Maximum power dissipation per pole | 3.84 W | |
| Operating temperature | -35°C to +70°C | |
| Storage temperature | -40°C to +80°C | |
| Maximum operating altitude | 2,000 m | |
| Mounting position | Vertical plane | |
| Mounting type | 35 mm DIN rail | |
| Terminal tightening torque | 1.8 to 2 Nm | |
| Conductor capacity | 1 to 25 mm² | |
| Protection rating | IP20 | |
| Pollution degree | 2 | |
| Weight | 205 g | |
| Applicable standard | IEC/EN 61009-1 | |
| Certifications | TÜV Rheinland and EAC |
It provides combined protection against overloads, short circuits and Type AC earth leakage faults in single-phase electrical distribution and control systems.
The P1RB1NC32AC300 has a rated current of 32 A and uses a C tripping characteristic.
This RCBO has a rated residual current of 300 mA, making it suitable for equipment, circuit and fire-risk protection applications.
Type AC protection detects sinusoidal alternating residual currents and is intended for circuits containing compatible conventional AC electrical loads.
The device has a rated short-circuit capacity of 10 kA.
The RCBO mounts onto a standard 35 mm DIN rail, occupies two DIN modules and supports conductors from 1 to 25 mm².
Lovato Electric circuit protection products are used by electrical engineers, panel builders and installation professionals seeking dependable performance, straightforward installation and effective protection for commercial and industrial electrical systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.