Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Lovato P1RB1NC16AC030 residual current circuit breaker with overcurrent protection, featuring a 1P+N configuration, 16 A rated current, C tripping characteristic, Type AC 30 mA residual current protection and 10 kA breaking capacity.
The Lovato P1RB1NC16AC030 is a compact and dependable residual current circuit breaker with overcurrent protection (RCBO) designed to protect electrical circuits against overloads, short circuits and earth leakage faults. Part of the Lovato Electric P1RB series, it combines miniature circuit breaker and residual current protection within a single modular device.
This RCBO features a 1P+N configuration, with one protected phase pole and a simultaneously switched neutral conductor. Combining multiple protective functions in one device helps simplify distribution board design, reduce installation time and conserve valuable DIN rail space.
With a rated current of 16 A, a C tripping characteristic, Type AC residual current detection and a rated residual operating current of 30 mA, the P1RB1NC16AC030 is suitable for final circuits requiring additional protection against electric shock. Its 10 kA short-circuit breaking capacity supports reliable fault interruption in commercial, industrial and residential electrical installations.
The Lovato P1RB1NC16AC030 combines thermal-magnetic overcurrent protection with residual current monitoring. It disconnects the protected circuit when an overload, short circuit or qualifying AC earth leakage fault is detected, helping protect wiring, equipment and people.
Its 30 mA residual current sensitivity makes it suitable for final circuits where additional protection against electric shock is required. Type AC protection is intended for circuits where sinusoidal alternating residual currents are expected and should be selected according to the connected load and installation requirements.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Phase | Single Phase | |
| Poles | 1-pole + N | |
| Device Type | RCBO | |
| Trip Curve | C curve | |
| Breaking Capacity | 10 kA | |
| Residual Current | 30 mA | |
| RCD Type | Type AC | |
| Manufacturer | Lovato Electric | |
| Series | P1RB | |
| Model | P1RB1NC16AC030 | |
| Product type | Residual current circuit breaker with overcurrent protection | |
| Product abbreviation | RCBO | |
| Pole configuration | 1P+N | |
| Total number of poles | 2 | |
| Number of protected poles | 1 | |
| Rated current | 16 A | |
| Tripping characteristic | C curve | |
| Residual current type | Type AC | |
| Rated residual operating current | 30 mA | |
| Rated operating voltage | 230 V AC | |
| Rated insulation voltage | 400 V | |
| Rated impulse withstand voltage | 4 kV | |
| Rated frequency | 50 / 60 Hz | |
| Short-circuit breaking capacity | 10 kA | |
| Number of DIN modules | 2 | |
| Built-in depth | 66 mm | |
| Front protection rating | IP20 | |
| Pollution degree | 2 | |
| Mounting type | DIN rail mounting | |
| Applicable standard | IEC/EN 61009-1 | |
| Certifications | TÜV Rheinland and EAC | |
| Product weight | Approx. 205 g | |
| Catalogue status | Out of catalogue |
It provides combined protection against overloads, short circuits and Type AC earth leakage faults in single-phase electrical circuits.
The P1RB1NC16AC030 has a rated current of 16 A and uses a C tripping characteristic.
This RCBO has a rated residual operating current of 30 mA, making it suitable for circuits requiring additional protection against electric shock.
Type AC protection detects sinusoidal alternating residual currents and is intended for circuits containing compatible conventional AC loads.
The device has a rated short-circuit breaking capacity of 10 kA.
No. The P1RB1NC16AC030 is listed as out of catalogue. Contact LED Controls for assistance identifying availability or a suitable replacement.
Lovato Electric circuit protection products are used by electricians, panel builders and industrial engineers seeking dependable operation, straightforward installation and effective protection for electrical distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.