Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Chint NB310L-3N-B32 3P+N RCBO with 32A rated current, B Curve characteristic, Type A residual current protection, 30mA sensitivity and 6kA breaking capacity for three-phase electrical installations.
£60.04
The Chint NB310L-3N-B32 is a reliable 3P+N RCBO (Residual Current Circuit Breaker with Overcurrent Protection) designed to provide combined protection against earth leakage, overloads and short circuits in three-phase electrical installations. By integrating residual current protection and overcurrent protection into one compact device, it helps simplify distribution board design while improving electrical safety.
As part of the Chint NB310L Series, this RCBO is suitable for commercial, industrial and residential low-voltage distribution systems. It features a 32A rated current, B Curve trip characteristic and Type A residual current protection, making it suitable for circuits where both AC and pulsating DC residual currents may occur.
With a 30mA residual operating current, 230/400V AC rated voltage and 6kA short circuit breaking capacity, the NB310L-3N-B32 delivers dependable circuit protection for modern electrical installations, control panels, machinery supplies and three-phase distribution boards.
The Chint NB310L-3N-B32 helps protect personnel, cables and connected equipment by disconnecting the circuit when leakage current, overload or short circuit faults are detected. This makes it a practical choice for electrical installers and panel builders requiring compact, reliable protection in three-phase systems.
Its Type A residual current protection is well suited to modern installations containing electronic loads, drives, power supplies and control equipment, where pulsating DC residual currents may be present in addition to standard AC leakage currents.
Tick the specs you need, then view products that match.
| Poles | 3-pole + N | |
|---|---|---|
| Current | 32 A | |
| Phase | Three Phase | |
| Trip Curve | B curve | |
| Breaking Capacity | 6 kA | |
| Residual Current | 30 mA | |
| RCD Type | Type A | |
| Device Type | RCD | |
| Manufacturer | Chint | |
| Series | NB310L | |
| Model | NB310L-3N-B32 | |
| Product type | Residual Current Circuit Breaker with Overcurrent Protection | |
| Configuration | 3P+N | |
| Rated current | 32A | |
| Trip Curve | B Curve | |
| Residual current type | Type A | |
| Rated residual operating current | 30mA | |
| Rated voltage | 230/400V AC | |
| Frequency | 50/60Hz | |
| Rated short circuit breaking capacity | 6kA | |
| Rated insulation voltage | 500V | |
| Rated impulse withstand voltage | 4kV | |
| Protection rating | IP20 | |
| Mounting type | 35mm DIN rail | |
| Standard | IEC/EN 61009-1 |
The Chint NB310L-3N-B32 is used to protect three-phase circuits against overloads, short circuits and earth leakage faults.
This model has a 32A rated current, making it suitable for selected three-phase distribution and equipment circuits.
B Curve devices are designed for general circuit protection and typically trip between 3 and 5 times the rated current during magnetic fault conditions.
Type A protection detects sinusoidal AC residual currents and pulsating DC residual currents, making it suitable for many modern electrical installations.
The RCBO is designed for installation onto a standard 35mm DIN rail inside distribution boards and electrical control panels.
Chint NB310L RCBOs are used by electricians, panel builders and electrical contractors to deliver dependable protection for modern low-voltage installations where safety, reliability and efficient panel design are essential.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.