Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£66.29
The IMO B6DR1N32-30-A is a high-performance Residual Current Circuit Breaker with Overcurrent Protection (RCBO) designed to protect single-phase electrical circuits against earth leakage, overload and short-circuit faults. Combining the functions of an MCB and an RCD within one device, it provides comprehensive circuit protection while simplifying installation inside distribution boards, control panels and electrical enclosures.
As a Type A RCBO, the B6DR1N32-30-A detects both alternating residual currents and pulsating DC residual currents. This makes it suitable for modern installations containing electronic controls, LED drivers, switched-mode power supplies, automation equipment and other loads that may generate pulsating DC leakage currents.
With a 32 A rated current, D curve tripping characteristic, 30 mA residual operating current and 10 kA short-circuit breaking capacity, this RCBO is particularly suited to demanding circuits with high starting or inrush currents. Typical applications include transformers, industrial machinery, motor control equipment and specialised commercial or industrial loads.
The IMO B6DR1N32-30-A continuously monitors the protected circuit for excessive current and residual earth leakage. When a hazardous overload, short circuit or leakage condition is detected, the device disconnects the affected circuit to help protect personnel, electrical wiring and connected equipment.
Its D curve characteristic permits a higher temporary starting current than conventional B or C curve devices. This helps prevent nuisance tripping when equipment such as transformers, motors, solenoids or industrial power supplies is energised, while still providing dependable protection under sustained fault conditions.
Tick the specs you need, then view products that match.
| Voltage | 230 V | |
|---|---|---|
| Phase | Single Phase | |
| Poles | 1-pole + N | |
| Device Type | RCBO | |
| Trip Curve | D curve | |
| Breaking Capacity | 10 kA | |
| Residual Current | 30 mA | |
| RCD Type | Type A | |
| Manufacturer | IMO Precision Controls | |
| Series | B6 RCBO | |
| Model | B6DR1N32-30-A | |
| Product type | Residual Current Circuit Breaker with Overcurrent Protection | |
| Rated current | 32 A | |
| Tripping characteristic | D Curve | |
| Residual operating current | 30 mA | |
| Residual current type | Type A | |
| Rated voltage | 110/230 V AC | |
| Rated frequency | 50/60 Hz | |
| Pole configuration | 1 Pole + Neutral | |
| Rated short-circuit capacity | 10 kA | |
| Protection rating | IP20 | |
| Terminal capacity | Up to 25 mm² | |
| Mounting type | 35 mm DIN rail | |
| Product width | approx. 35 mm | |
| Standard | IEC/EN 61009-1 | |
| HS Code | 8536201090 | |
| Country of Manufacture | China |
It provides combined overload, short-circuit and Type A residual current protection for single-phase circuits requiring a 32 A D curve RCBO.
A D curve RCBO is suitable for equipment with high starting or inrush currents, including transformers, motors, solenoids and industrial machinery.
Type A protection detects both alternating residual currents and pulsating DC residual currents produced by many modern electronic devices.
The B6DR1N32-30-A has a rated short-circuit breaking capacity of 10 kA.
The RCBO mounts onto a standard 35 mm DIN rail within a compatible distribution board, consumer unit or industrial control enclosure.
IMO B6 Type A RCBOs provide electricians, panel builders and machinery manufacturers with dependable fault protection, straightforward DIN rail installation and reliable performance across commercial and industrial electrical applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.