Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£71.43
The IMO B6CR1N25-100-A is a high-performance Residual Current Circuit Breaker with Overcurrent Protection (RCBO) engineered to provide reliable protection against earth leakage, overload and short circuit faults in commercial, industrial and residential electrical installations. Combining the functionality of an MCB and RCD within a single compact device, it simplifies installation while delivering dependable circuit protection in accordance with IEC 61009.
Part of the trusted IMO B6 RCBO range, this model incorporates Type A residual current protection, allowing it to detect both AC and pulsating DC residual currents commonly produced by modern electronic equipment. Its slim DIN rail mounted design helps maximise valuable panel space whilst maintaining high levels of electrical safety and operational reliability.
With a 25 A rated current, 100 mA residual operating current, Type C tripping characteristic and a 10 kA short-circuit breaking capacity, the B6CR1N25-100-A is well suited for protecting distribution circuits, machinery, control panels and industrial electrical systems requiring dependable fault protection.
The IMO B6CR1N25-100-A continuously monitors circuits for earth leakage, overload and short circuit conditions. If a fault is detected, the RCBO disconnects the electrical supply rapidly, helping protect people, equipment and installations whilst reducing the risk of electrical fires and costly downtime.
Its Type A residual current sensing makes it particularly suitable for installations containing variable speed drives, LED lighting, switched-mode power supplies and other electronic equipment that may generate pulsating DC leakage currents.
Tick the specs you need, then view products that match.
| Voltage | 230 V | |
|---|---|---|
| Phase | Single Phase | |
| Poles | 1-pole + N | |
| Device Type | RCBO | |
| Trip Curve | C curve | |
| Breaking Capacity | 10 kA | |
| Residual Current | 100 mA | |
| RCD Type | Type A | |
| Manufacturer | IMO Precision Controls | |
| Series | B6 RCBO | |
| Model | B6CR1N25-100-A | |
| Product type | Residual Current Circuit Breaker with Overcurrent Protection (RCBO) | |
| Rated current | 25 A | |
| Residual operating current | 100 mA | |
| Residual current type | Type A | |
| Tripping characteristic | Type C | |
| Breaking capacity | 10 kA | |
| Pole configuration | 1 Pole + Neutral | |
| Rated voltage | 230 V AC | |
| Frequency | 50 / 60 Hz | |
| Standard | IEC 61009 | |
| Protection rating | IP20 | |
| Mounting type | 35 mm DIN rail | |
| Module width | 18 mm | |
| HS Code | 8536201090 | |
| Country of Manufacture | China |
It provides combined protection against earth leakage, overloads and short circuits for individual electrical circuits.
The RCBO trips when earth leakage reaches approximately 100 mA, helping protect electrical installations against earth fault conditions.
The unit provides Type A protection, detecting both AC and pulsating DC residual currents.
Type C RCBOs are suitable for circuits supplying equipment with moderate inrush currents, including motors, transformers and industrial machinery.
The B6CR1N25-100-A is designed for installation on a standard 35 mm DIN rail within consumer units, distribution boards and industrial control panels.
IMO RCBOs are trusted by electrical contractors, machine builders and panel manufacturers worldwide for delivering dependable circuit protection, high reliability and compliance with recognised international standards.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.