Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£71.97
The IMO B10R4063-300-A is a dependable Type A Residual Current Circuit Breaker (RCCB) designed to protect commercial and industrial electrical installations against earth leakage faults. This four-pole device monitors the current flowing through a three-phase plus neutral circuit and disconnects the electrical supply when the residual current reaches its specified operating threshold.
Its Type A residual current characteristic enables the B10R4063-300-A to detect both sinusoidal alternating residual currents and pulsating DC residual currents. This makes it suitable for modern installations containing electronic controls, switch-mode power supplies, single-phase inverters and other equipment that may produce pulsating DC leakage.
With a 63A rated current, 300mA rated residual operating current and four-pole configuration, the IMO B10R4063-300-A is intended primarily for earth fault and fire-risk protection in three-phase distribution systems. Its compact modular construction allows straightforward installation within distribution boards, switchgear assemblies and industrial control panels.
A residual current circuit breaker continuously compares the current flowing through every live conductor in a circuit. An imbalance indicates that current may be leaking to earth, causing the RCCB to disconnect the supply when the leakage reaches its rated operating threshold.
Unlike a Type AC device, a Type A RCCB can respond to both alternating residual currents and pulsating DC residual currents generated by many electronically controlled appliances and systems. The 300mA sensitivity of this model is generally intended for earth fault and fire-risk protection rather than additional personal protection.
The B10R4063-300-A provides residual current protection only. An appropriately rated fuse or circuit breaker must therefore be installed to provide overload and short-circuit protection.
Tick the specs you need, then view products that match.
| Voltage | 415 V | |
|---|---|---|
| Phase | Three Phase | |
| Poles | 4-pole | |
| Device Type | RCD | |
| Residual Current | 300 mA | |
| Manufacturer | IMO Precision Controls | |
| Series | B10R | |
| Model | B10R4063-300-A | |
| Product type | Type A Residual Current Circuit Breaker (RCCB) | |
| Rated current | 63A | |
| Rated residual operating current | 300mA | |
| Residual current characteristic | Type A | |
| Rated voltage | 230/400V AC | |
| Rated frequency | 50/60Hz | |
| Number of poles | 4 | |
| Pole configuration | 3 pole + neutral | |
| Detected residual currents | Sinusoidal AC and pulsating DC | |
| Conditional short-circuit rating | 10kA | |
| Test facility | Integrated test button | |
| Mounting type | TS35 DIN rail | |
| Installation location | Distribution board, switchgear or control panel | |
| Overcurrent protection | Separate circuit breaker or fuse required | |
| Applicable standard | IEC/EN 61008-1 | |
| HS Code | 8536201090 | |
| Country of Manufacture | China |
It provides residual current protection for three-phase plus neutral electrical circuits and disconnects the supply when earth leakage reaches the specified operating threshold.
Type A means the RCCB can detect both sinusoidal alternating residual currents and pulsating DC residual currents produced by many modern electronic loads.
The IMO B10R4063-300-A has a rated current of 63A.
This model has a rated residual operating current of 300mA and is generally used for earth fault and fire-risk protection.
A 300mA RCCB is generally selected for earth fault and fire-risk protection. Circuits requiring additional protection against electric shock typically use a suitably selected 30mA residual current device.
No. It provides residual current protection only and must be used with a correctly rated circuit breaker or fuse for overload and short-circuit protection.
IMO residual current circuit breakers provide electrical contractors, panel builders and industrial engineers with dependable earth leakage protection for commercial and industrial power distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.