Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£236.04
The ABB DSE203NMC50A10 is a compact 3P+N electronic residual current circuit breaker with overcurrent protection (eRCBO) designed to protect compatible three-phase electrical circuits against overloads, short circuits and earth leakage faults. Part of the ABB DSE203N M series, it combines overcurrent and residual current protection within one modular device, helping simplify distribution-board design and conserve enclosure space.
Developed for commercial, industrial and OEM installations, the DSE203NMC50A10 provides dedicated protection for an individual circuit. Its electronic residual current monitoring supports reliable leakage-current detection, while the 3P+N configuration makes it suitable for three-phase systems incorporating a neutral conductor.
Featuring a 50 A rated current, Type C tripping characteristic, 10 mA Type A residual current sensitivity and 10 kA short-circuit breaking capacity, this ABB RCBO is suited to higher-load circuits with moderate starting currents where sensitive earth leakage protection is required.
The ABB DSE203NMC50A10 monitors the protected circuit for excessive current and leakage to earth. If an overload, short circuit or residual current fault occurs, the RCBO disconnects the affected circuit to help reduce the risk of conductor damage, equipment failure, electrical fire and electric shock.
Integrating these protective functions within one device also allows the circuit to be isolated independently instead of relying on a shared residual current device. This can reduce the number of unrelated loads affected by an earth leakage fault and make fault identification more straightforward.
The Type C tripping characteristic is intended for circuits that can experience moderate inrush currents during normal operation. Potential applications include appropriately assessed motors, pumps, transformers, commercial lighting equipment, industrial machinery and control systems.
Suitability must be confirmed against the connected load, conductor size, prospective fault current, earthing arrangement and required disconnection time. Protective-device selection should always be completed by a suitably qualified electrical professional.
As a Type A RCBO, the DSE203NMC50A10 is designed to detect sinusoidal alternating residual currents and pulsating direct residual currents. This makes it suitable for many modern circuits containing electronic controls, rectifiers, switched-mode power supplies and similar equipment.
Its 10 mA residual current sensitivity provides a lower operating threshold than a commonly specified 30 mA device. This enhanced sensitivity may be appropriate for specifically assessed applications, although normal operational leakage from connected equipment must be considered to minimise unwanted tripping.
The ABB DSE203NMC50A10 is intended for DIN rail installation within a compatible electrical enclosure. Before installation, the system designer should verify the supply voltage, circuit load, conductor capacity, prospective short-circuit current, earthing arrangement and required residual current sensitivity.
Installation, testing and periodic inspection must be performed by a competent electrical professional in accordance with applicable wiring regulations and ABB installation instructions. The device test function should be operated at the intervals specified for the installation.
Tick the specs you need, then view products that match.
| Poles | 3-pole + N | |
|---|---|---|
| Current | 50 A | |
| Phase | Three Phase | |
| Device Type | RCBO | |
| Trip Curve | C curve | |
| Residual Current | 10 mA | |
| Function | 3P+N electronic residual current circuit breaker with overcurrent protection (eRCBO). | |
| Protection | Against short-circuit, overload, earth fault currents, indirect contacts, and direct contact (30 mA versions). | |
| Poles | 3 protected poles plus unswitched neutral. | |
| Type of Residual Current | Type A. | |
| Connection | Bottom power supply connection. | |
| Current Rating | C50 A (50 Amperes). | |
| Terminal Capacity | Busbar 10 mm², rigid 1–25 mm², flexible 1–16 mm². | |
| Mechanical Endurance | 20,000 cycles. | |
| Electrical Endurance | 10,000 cycles. | |
| Neutral Terminal Position | Left side. |
The ABB DSE203NMC50A10 provides combined overload, short-circuit and earth leakage protection for compatible three-phase circuits incorporating a neutral conductor.
The ABB DSE203NMC50A10 has a rated current of 50 A.
A Type C characteristic is suitable for appropriately designed circuits with moderate inrush currents, including selected motors, pumps, transformers, lighting equipment and industrial control loads.
It provides 10 mA Type A residual current protection, detecting sinusoidal AC residual currents and pulsating DC residual currents.
The device has a rated short-circuit breaking capacity of 10 kA, subject to the applicable installation conditions and product standard.
Its Type A classification makes it suitable for many circuits containing electronic equipment capable of producing pulsating DC leakage currents. The complete load profile must still be assessed before installation.
It is designed for DIN rail mounting inside compatible commercial or industrial distribution boards, switchboards and electrical control panels.
Not automatically. A 10 mA RCBO has a more sensitive operating threshold, so normal circuit leakage, discrimination requirements and applicable wiring regulations must be considered by the system designer.
The ABB DSE203NMC50A10 combines 50 A Type C overcurrent protection with sensitive 10 mA Type A residual current detection, providing a compact protective solution for appropriately designed three-phase electrical circuits.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.